EDR Telemetry Blocker

Blocks EDR Telemetry by performing Person-in-the-Middle attack where network filtering is applied using iptables. The blocked destination IP addresses are parsed based on the server name in TLS Client Hello packet and the provided blocked server name (or blocked string) list in the file. Link to our blog: https://tierzerosecurity.co.nz/2024/07/23/edr-telemetry-blocker.html

# python3 edr_blocker.py -h

 ______   _____    ______       ______   __       ______   ______   __  __   ______   ______
/\  ___\ /\  __-. /\  == \     /\  == \ /\ \     /\  __ \ /\  ___\ /\ \/ /  /\  ___\ /\  == \
\ \  __\ \ \ \/\ \\ \  __<     \ \  __< \ \ \____\ \ \/\ \\ \ \____\ \  _"-.\ \  __\ \ \  __<
 \ \_____\\ \____- \ \_\ \_\    \ \_____\\ \_____\\ \_____\\ \_____\\ \_\ \_\\ \_____\\ \_\ \_\
  \/_____/ \/____/  \/_/ /_/     \/_____/ \/_____/ \/_____/ \/_____/ \/_/\/_/ \/_____/ \/_/ /_/

                                                            by Tier Zero Security - New Zealand

usage: edr_blocker.py [-h] -i INTERFACE -f FILE [-m] [-v] -t TARGET -gw GATEWAY

Performs ARP Poisoning against victim host(s) and blocks EDR telemetry by utilising iptables.

options:
  -h, --help            show this help message and exit
  -i INTERFACE, --interface INTERFACE
                        Network interface to sniff on
  -f FILE, --file FILE  File containing the list of blocked server names or a part of the name 
  -m, --monitor         Monitor mode: only detect and log blocked IPs, do not add iptables rules
  -v, --verbose         Enable verbose output
  -t TARGET, --target TARGET
                        Target IP address or range (e.g., 192.168.0.1-10 or 192.168.0.1,192.168.0.2 (no space)
  -gw GATEWAY, --gateway GATEWAY
                        Gateway IP address

Example: python3 edr_blocker.py -i eth0 -f mde_block.txt -t 192.168.0.50 -gw 192.168.0.1

FILE

This is probably not a complete list for everyone. But worked in our lab environment. block_mde.txt:

events.data.microsoft.com
wd.microsoft.com
wdcpalt.microsoft.com
wdcp.microsoft.com
blob.core.windows.net
winatp-gw-cus
automatedirstrprdcus
endpoint.security.microsoft.com
smartscreen.microsoft.com

block_cs.txt:

cloudsink.net

Installing edr_blocker.py

git clone [email protected]:TierZeroSecurity/edr_blocker.git
cd edr_blocker

Install python venv

pip install virtualenv

Create virtual environment

python3 -m venv myenv

Install Python Scapy

source myenv/bin/activate
sudo pip install scapy

Enable packet forwarding

sysctl -w net.ipv4.ip_forward=1

Run edr_blocker.py

sudo python3 edr_blocker.py -h

Some useful commands

Check bloked IP addresses and number of blocked packets

iptables -L -v -n

Flush iptables rules

iptables -F

Add destination IP address to iptables DROP rule

iptables -A FORWARD -d <IP> -j DROP