Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: introduce kernel parameter acpi_sleep=sci_force_enable
  ACPI: WMI: Survive BIOS with duplicate GUIDs
  dell-wmi - fix condition to abort driver loading
  wmi: check find_guid() return value to prevent oops
  dell-wmi, hp-wmi, msi-wmi: check wmi_get_event_data() return value
  ACPI: hp-wmi, msi-wmi: clarify that wmi_install_notify_handler() returns an acpi_status
  dell-wmi: sys_init_module: 'dell_wmi'->init suspiciously returned 21, it should
  ACPI video: correct error-handling code
  ACPI video: no warning message if "acpi_backlight=vendor" is used
  ACPI: fix ACPI=n allmodconfig build
  thinkpad-acpi: improve Kconfig help text
  thinkpad-acpi: update volume subdriver documentation
  thinkpad-acpi: make volume subdriver optional
  thinkpad-acpi: don't fail to load the entire module due to ALSA problems
  thinkpad-acpi: don't take the first ALSA slot by default

Documentation/kernel-parameters.txt

@@ -240,7 +240,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
-				  old_ordering, s4_nonvs }
+				  old_ordering, s4_nonvs, sci_force_enable }
 			See Documentation/power/video.txt for information on
 			s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
@@ -253,6 +253,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			of _PTS is used by default).
 			s4_nonvs prevents the kernel from saving/restoring the
 			ACPI NVS memory during hibernation.
+			sci_force_enable causes the kernel to set SCI_EN directly
+			on resume from S1/S3 (which is against the ACPI spec,
+			but some broken systems don't work without it).
 
 	acpi_use_timer_override [HW,ACPI]
 			Use timer override. For some broken Nvidia NF5 boards

Documentation/laptops/thinkpad-acpi.txt

@@ -1092,8 +1092,8 @@ WARNING:
     its level up and down at every change.
 
 
-Volume control
---------------
+Volume control (Console Audio control)
+--------------------------------------
 
 procfs: /proc/acpi/ibm/volume
 ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
@@ -1110,9 +1110,53 @@ the desktop environment to just provide on-screen-display feedback.
 Software volume control should be done only in the main AC97/HDA
 mixer.
 
-This feature allows volume control on ThinkPad models with a digital
-volume knob (when available, not all models have it), as well as
-mute/unmute control.  The available commands are:
+
+About the ThinkPad Console Audio control:
+
+ThinkPads have a built-in amplifier and muting circuit that drives the
+console headphone and speakers.  This circuit is after the main AC97
+or HDA mixer in the audio path, and under exclusive control of the
+firmware.
+
+ThinkPads have three special hotkeys to interact with the console
+audio control: volume up, volume down and mute.
+
+It is worth noting that the normal way the mute function works (on
+ThinkPads that do not have a "mute LED") is:
+
+1. Press mute to mute.  It will *always* mute, you can press it as
+   many times as you want, and the sound will remain mute.
+
+2. Press either volume key to unmute the ThinkPad (it will _not_
+   change the volume, it will just unmute).
+
+This is a very superior design when compared to the cheap software-only
+mute-toggle solution found on normal consumer laptops:  you can be
+absolutely sure the ThinkPad will not make noise if you press the mute
+button, no matter the previous state.
+
+The IBM ThinkPads, and the earlier Lenovo ThinkPads have variable-gain
+amplifiers driving the speakers and headphone output, and the firmware
+also handles volume control for the headphone and speakers on these
+ThinkPads without any help from the operating system (this volume
+control stage exists after the main AC97 or HDA mixer in the audio
+path).
+
+The newer Lenovo models only have firmware mute control, and depend on
+the main HDA mixer to do volume control (which is done by the operating
+system).  In this case, the volume keys are filtered out for unmute
+key press (there are some firmware bugs in this area) and delivered as
+normal key presses to the operating system (thinkpad-acpi is not
+involved).
+
+
+The ThinkPad-ACPI volume control:
+
+The preferred way to interact with the Console Audio control is the
+ALSA interface.
+
+The legacy procfs interface allows one to read the current state,
+and if volume control is enabled, accepts the following commands:
 
 	echo up   >/proc/acpi/ibm/volume
 	echo down >/proc/acpi/ibm/volume
@@ -1121,12 +1165,10 @@ mute/unmute control.  The available commands are:
 	echo 'level <level>' >/proc/acpi/ibm/volume
 
 The <level> number range is 0 to 14 although not all of them may be
-distinct. The unmute the volume after the mute command, use either the
+distinct. To unmute the volume after the mute command, use either the
 up or down command (the level command will not unmute the volume), or
 the unmute command.
 
-The current volume level and mute state is shown in the file.
-
 You can use the volume_capabilities parameter to tell the driver
 whether your thinkpad has volume control or mute-only control:
 volume_capabilities=1 for mixers with mute and volume control,

arch/x86/kernel/acpi/sleep.c

@@ -162,6 +162,8 @@ static int __init acpi_sleep_setup(char *str)
 #endif
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
+		if (strncmp(str, "sci_force_enable", 16) == 0)
+			acpi_set_sci_en_on_resume();
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");

drivers/acpi/sleep.c

@@ -80,6 +80,23 @@ static int acpi_sleep_prepare(u32 acpi_state)
 
 #ifdef CONFIG_ACPI_SLEEP
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states.  Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume.  Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware.  The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
+void __init acpi_set_sci_en_on_resume(void)
+{
+	set_sci_en_on_resume = true;
+}
+
 /*
  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
  * user to request that behavior by using the 'acpi_old_suspend_ordering'
@@ -170,18 +187,6 @@ static void acpi_pm_end(void)
 #endif /* CONFIG_ACPI_SLEEP */
 
 #ifdef CONFIG_SUSPEND
-/*
- * According to the ACPI specification the BIOS should make sure that ACPI is
- * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states.  Still,
- * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
- * on such systems during resume.  Unfortunately that doesn't help in
- * particularly pathological cases in which SCI_EN has to be set directly on
- * resume, although the specification states very clearly that this flag is
- * owned by the hardware.  The set_sci_en_on_resume variable will be set in such
- * cases.
- */
-static bool set_sci_en_on_resume;
-
 extern void do_suspend_lowlevel(void);
 
 static u32 acpi_suspend_states[] = {

drivers/acpi/video.c

@@ -999,8 +999,10 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		sprintf(name, "acpi_video%d", count++);
 		device->backlight = backlight_device_register(name,
 			NULL, device, &acpi_backlight_ops);
-		device->backlight->props.max_brightness = device->brightness->count-3;
 		kfree(name);
+		if (IS_ERR(device->backlight))
+			return;
+		device->backlight->props.max_brightness = device->brightness->count-3;
 
 		result = sysfs_create_link(&device->backlight->dev.kobj,
 					   &device->dev->dev.kobj, "device");
@@ -1979,6 +1981,10 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event)
 	unsigned long long level_current, level_next;
 	int result = -EINVAL;
 
+	/* no warning message if acpi_backlight=vendor is used */
+	if (!acpi_video_backlight_support())
+		return 0;
+
 	if (!device->brightness)
 		goto out;
 

drivers/char/ipmi/ipmi_si_intf.c

@@ -3204,7 +3204,7 @@ static __devinit int init_ipmi_si(void)
 #ifdef CONFIG_ACPI
 	spmi_find_bmc();
 #endif
-#ifdef CONFIG_PNP
+#ifdef CONFIG_ACPI
 	pnp_register_driver(&ipmi_pnp_driver);
 #endif
 
@@ -3330,7 +3330,7 @@ static __exit void cleanup_ipmi_si(void)
 #ifdef CONFIG_PCI
 	pci_unregister_driver(&ipmi_pci_driver);
 #endif
-#ifdef CONFIG_PNP
+#ifdef CONFIG_ACPI
 	pnp_unregister_driver(&ipmi_pnp_driver);
 #endif
 

drivers/platform/x86/Kconfig

@@ -231,8 +231,36 @@ config THINKPAD_ACPI
 
 	  This driver was formerly known as ibm-acpi.
 
+	  Extra functionality will be available if the rfkill (CONFIG_RFKILL)
+	  and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
+	  Note that if you want ThinkPad-ACPI to be built-in instead of
+	  modular, ALSA and rfkill will also have to be built-in.
+
 	  If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
 
+config THINKPAD_ACPI_ALSA_SUPPORT
+	bool "Console audio control ALSA interface"
+	depends on THINKPAD_ACPI
+	depends on SND
+	depends on SND = y || THINKPAD_ACPI = SND
+	default y
+	---help---
+	  Enables monitoring of the built-in console audio output control
+	  (headphone and speakers), which is operated by the mute and (in
+	  some ThinkPad models) volume hotkeys.
+
+	  If this option is enabled, ThinkPad-ACPI will export an ALSA card
+	  with a single read-only mixer control, which should be used for
+	  on-screen-display feedback purposes by the Desktop Environment.
+
+	  Optionally, the driver will also allow software control (the
+	  ALSA mixer will be made read-write).  Please refer to the driver
+	  documentation for details.
+
+	  All IBM models have both volume and mute control.  Newer Lenovo
+	  models only have mute control (the volume hotkeys are just normal
+	  keys and volume control is done through the main HDA mixer).
+
 config THINKPAD_ACPI_DEBUGFACILITIES
 	bool "Maintainer debug facilities"
 	depends on THINKPAD_ACPI

drivers/platform/x86/dell-wmi.c

@@ -202,8 +202,13 @@ static void dell_wmi_notify(u32 value, void *context)
 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
 	static struct key_entry *key;
 	union acpi_object *obj;
+	acpi_status status;
 
-	wmi_get_event_data(value, &response);
+	status = wmi_get_event_data(value, &response);
+	if (status != AE_OK) {
+		printk(KERN_INFO "dell-wmi: bad event status 0x%x\n", status);
+		return;
+	}
 
 	obj = (union acpi_object *)response.pointer;
 
@@ -325,7 +330,7 @@ static int __init dell_wmi_init(void)
 	int err;
 	acpi_status status;
 
-	if (wmi_has_guid(DELL_EVENT_GUID)) {
+	if (!wmi_has_guid(DELL_EVENT_GUID)) {
 		printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n");
 		return -ENODEV;
 	}

drivers/platform/x86/hp-wmi.c

@@ -338,8 +338,13 @@ static void hp_wmi_notify(u32 value, void *context)
 	static struct key_entry *key;
 	union acpi_object *obj;
 	int eventcode;
+	acpi_status status;
 
-	wmi_get_event_data(value, &response);
+	status = wmi_get_event_data(value, &response);
+	if (status != AE_OK) {
+		printk(KERN_INFO "hp-wmi: bad event status 0x%x\n", status);
+		return;
+	}
 
 	obj = (union acpi_object *)response.pointer;
 
@@ -581,7 +586,7 @@ static int __init hp_wmi_init(void)
 	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
 		err = wmi_install_notify_handler(HPWMI_EVENT_GUID,
 						 hp_wmi_notify, NULL);
-		if (!err)
+		if (ACPI_SUCCESS(err))
 			hp_wmi_input_setup();
 	}
 

drivers/platform/x86/msi-wmi.c

@@ -149,8 +149,13 @@ static void msi_wmi_notify(u32 value, void *context)
 	static struct key_entry *key;
 	union acpi_object *obj;
 	ktime_t cur;
+	acpi_status status;
 
-	wmi_get_event_data(value, &response);
+	status = wmi_get_event_data(value, &response);
+	if (status != AE_OK) {
+		printk(KERN_INFO DRV_PFX "bad event status 0x%x\n", status);
+		return;
+	}
 
 	obj = (union acpi_object *)response.pointer;
 
@@ -236,7 +241,7 @@ static int __init msi_wmi_init(void)
 	}
 	err = wmi_install_notify_handler(MSIWMI_EVENT_GUID,
 			msi_wmi_notify, NULL);
-	if (err)
+	if (ACPI_FAILURE(err))
 		return -EINVAL;
 
 	err = msi_wmi_input_setup();