[PATCH] atm/ambassador: use bitrev8

Use bitrev8 for ambassador driver. Cc: Chas Williams <[email protected]> Cc: Giuliano Procida at Madge Networks <[email protected]> Signed-off-by: Akinobu Mita <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
maraz · Dec 8, 2006 · 0a85885 · 0a85885
1 parent 60e657e
commit 0a85885
Show file tree

Hide file tree

Showing 2 changed files with 4 additions and 14 deletions.
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
@@ -242,6 +242,7 @@ config ATM_IDT77252_USE_SUNI
 config ATM_AMBASSADOR
 	tristate "Madge Ambassador (Collage PCI 155 Server)"
 	depends on PCI && ATM
+	select BITREVERSE
 	help
 	  This is a driver for ATMizer based ATM card produced by Madge
 	  Networks Ltd. Say Y (or M to compile as a module named ambassador)

diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/poison.h>
+#include <linux/bitrev.h>
 
 #include <asm/atomic.h>
 #include <asm/io.h>
@@ -2068,18 +2069,6 @@ static void __devinit amb_ucode_version (amb_dev * dev) {
   PRINTK (KERN_INFO, "microcode version is %u.%u", major, minor);
 }
 
-// swap bits within byte to get Ethernet ordering
-static u8 bit_swap (u8 byte)
-{
-    const u8 swap[] = {
-      0x0, 0x8, 0x4, 0xc,
-      0x2, 0xa, 0x6, 0xe,
-      0x1, 0x9, 0x5, 0xd,
-      0x3, 0xb, 0x7, 0xf
-    };
-    return ((swap[byte & 0xf]<<4) | swap[byte>>4]);
-}
-
 // get end station address
 static void __devinit amb_esi (amb_dev * dev, u8 * esi) {
   u32 lower4;
@@ -2101,9 +2090,9 @@ static void __devinit amb_esi (amb_dev * dev, u8 * esi) {
     PRINTDB (DBG_INIT, "ESI:");
     for (i = 0; i < ESI_LEN; ++i) {
       if (i < 4)
-	  esi[i] = bit_swap (lower4>>(8*i));
+	  esi[i] = bitrev8(lower4>>(8*i));
       else
-	  esi[i] = bit_swap (upper2>>(8*(i-4)));
+	  esi[i] = bitrev8(upper2>>(8*(i-4)));
       PRINTDM (DBG_INIT, " %02x", esi[i]);
     }