v6.1.1

Fix some wifi connection problems

v5.14.0

Release v5.14.0

v5.13.1

Release version 5.13.1

v5.12.0

5.12.0 20180209
* Change library PubSubClient.h define MQTT_MAX_PACKET_SIZE from 512 to
1000 for Home Assistant  support
* Change relation of define MESSZ being dependent on PubSubClient.h
define MQTT_MAX_PACKET_SIZE
* Change command color parameter input checks to less strict for Home
Assistant support
* Change command Ina219Mode into command Sensor13
* Change commands HlwPCal, HlwUCal and HlwICal to PowerCal, VoltageCal
and CurrentCal to be used for both Pow and S31 calibration
* Change commands HlwPSet, HlwUSet and HlwISet to PowerSet, VoltageSet
and CurrentSet to be used for both Pow and S31 calibration
* Change uptime from hour to second resulting in a display of
123T13:45:21 where 123 is days
* Change module name Wemos D1 mini into Generic (arendst#1220)
* Change HTML from width=100% to style=width:100% supporting HTML5
(arendst#1358)
* Change OSWATCH_RESET_TIME (Blocked loop) from 30 to 120 seconds to
allow slow networks (arendst#1556)
* Change WIFI_MANAGER_SEC into WIFI_CONFIG_SEC (arendst#1616)
* Change function pointers code to save code space and memory (arendst#1683)
* Change webserver argument processing gaining 5k code space (arendst#1705)
* Change weblog memory usage (arendst#1730, arendst#1793, arendst#1819)
* Update TasmotaSerial library to 1.1.0
* Update language files Italian (arendst#1594), Dutch (arendst#1723) and Spanish
(arendst#1722)
* Fix Non-English JSON temperature unit attachement
* Fix Arilux RF induced exception by moving interrupt handler to iram on
non ESP8266/Arduino lib v2.3.0
* Fix truncated command names and wrong response for DomoticzSwitchIdx
(arendst#1571)
* Fix %-sign issue as printf escape character in Humidity and Sonoff SC
(arendst#1579)
* Fix DS18B20 temperature JSON decimal dot (arendst#1561)
* Fix Energy JSON message (arendst#1621)
* Fix IRSend parameter translation (arendst#1636)
* Fix TSL2561 device detection (arendst#1644, arendst#1825)
* Fix BME680 teleperiod resistance measuring (arendst#1647)
* Fix Energy Monitoring Energy Today and Energy Total reading after
restart (arendst#1648)
* Fix IRReceive Data value (arendst#1663)
* Fix Energy Monitoring Energy Period roll-over (arendst#1688)
* Fix compiler warnings (arendst#1774)
* Fix command PWM response if no PWM channel is configured (arendst#1783)
* Add locale Decimal Separator to Web sensor page
* Add ColorTemperature to light status message
* Add command PowerOnState option 5 which inverts PulseTime and allows
for delayed always on after power on
* Add OtaMagic two step Web server OTA upgrade using filename-minimal
image if OTA free space is too small
* Add support for PMS5003 and PMS7003 particle concentration sensor
* Add command SetOption21 1 to allow Energy Monitoring when power is off
on Sonoff Pow and Sonoff S31 (arendst#1420)
* Add Chinese language file (arendst#1551)
* Add French language file (arendst#1561)
* Add Spanish language file (arendst#1589)
* Add HTTP Allow Cross Origin removed from ESP8266/Arduino lib v2.4.0
(arendst#1572)
* Add Home Assistant MQTT Discovery for switch and light to be enabled
by command SetOption19 1 (arendst#1534) or define
HOME_ASSISTANT_DISCOVERY_ENABLE in user_config.h (arendst#1685)
* Add command State to retrieve device state information (same data as
teleperiod state and status 11 in slightly different JSON format)
* Add optional login to Webserver AP mode (arendst#1587, arendst#1635)
* Add command Sensor15 2 to start MHZ19(B) Zero Point Calibration
(arendst#1643)
* Add support for Sonoff S31 Smart Socket with Power Consumption
Detection (arendst#1626)
* Add command SetOption20 to allow update of Dimmer/Color/Ct without
turning power on (arendst#1719, arendst#1741)
* Add NTP sync time slot based on chip id (arendst#1773)
* Add cursor pointer to web button (arendst#1836)

v5.11.1

5.11.1 20180107
 * Fix Sonoff Pow command handling (arendst#1542)

v5.11.0

5.11.0 20180107
 * Minor webpage HTML optimizations (arendst#1358)
 * Updated
German translation (arendst#1438)
 * Change Sonoff Pow Energy MQTT data message
and consolidate Status 8 into Status 10
 * Change ADS1115 default
voltage range from +/-2V to +/-6V (arendst#1289)
 * Change text to Active for 3
minutes (arendst#1364)
 * Change Wemo SetBinaryState to distinguish from
GetBinaryState (arendst#1357)
 * Change output of HTTP command to valid JSON
and Array only (arendst#1363)
 * Removed all MQTT, JSON and Command language
defines from locale files and set fixed to English (arendst#1473)
 * Renamed
commands Color2,3,4 to Color3,4,5
 * Fix BME280 calculation (arendst#1051)
 *
Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End
of Transmission) flag (arendst#1095, arendst#1294)
 * Fix PWM initialization in
Dimmer/Color mode (arendst#1321)
 * Fix Wemo Emulation (arendst#1357)
 * Fix display
of build date and time in non-english locale (arendst#1465)
 * Fix Wemo and Hue
emulation by adding M-Search response delay (arendst#1486)
 * Add libraries
Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and
TSL2561-Arduino-Library
 * Add command Color2 to set color while keeping
same dimmer value
 * Add device function pointers
 * Add support for
SenseAir S8 CO2 sensor
 * Add color led signal to Carbon Dioxide (CO2)
sensors using defines CO2_LOW and CO2_HIGH in user_config.h
 * Add
support for Domoticz Air Quality sensor to be used by MH-Z19(B) and
SenseAir sensors
 * Add support for PZEM004T energy sensor
 * Add
support for iTead SI7021 temperature and humidity sensor by
consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (arendst#735)

* Add support for BME680 using adafruit libraries (arendst#1212)
 * Add support
for MH-Z19(B) CO2 sensor (arendst#561, arendst#1248)
 * Add multipress support and
more user configurable GPIO to Sonoff Dual R2 (arendst#1291)
 * Add support for
TSL2561 using adafruit library (arendst#661, arendst#1311)
 * Add support for SHT3x
(arendst#1314)
 * Add support for Arilux LC06 (arendst#1414)
 * Add Italian language
file (arendst#1449)
 * Add 2nd Gen Alexa support to Wemo emulation discovery
(arendst#1357, arendst#1450)
 * Add define for additional number of WS2812 schemes
(arendst#1463)

v5.10.0

5.10.0 20171201
 * Upgrade library ArduinoJson to 5.11.2
 * Upgrade
library IRRemoteEsp8266 to 2.2.1 + 2 commits but disabled some protocols
(code size reduction)
 * Upgrade library NeoPixelBus to 2.2.9
 * Upgrade
library OneWire to 2.3.3 + 6 commits and disabled CRC lookup-table
(#define ONEWIRE_CRC8_TABLE 0) (code size reduction)
 * Update library
PubSubClient to 2.6 + 9 commits and additional delay (arendst#790)
 * Update
core_esp8266_wiring_digital.c to latest (staged) level
 * Patch library
I2Cdevlib-Core for esp8266-core 2.4.0-rc2 compatibility
 * Remove
command EnergyReset 1..3 now replaced by ENergyReset1 to EnergyReset3
 *
Remove spaces in JSON messages (code size reduction)
 * Renamed
xsns_05_ds18x20.ino to xsns_05_ds18x20_legacy.ino still using library
OneWire and providing dynamic sensor scan
 * Fix possible iram1_0_seg
compile error by shrinking ICACHE_RAM_ATTR code usage
 * Fix PWM
watchdog timeout if Dimmer is set to 100 or Color set to 0xFF (arendst#1146)
 *
Fix Sonoff Bridge Learn Mode hang caused by unrecognised RF code
(arendst#1181)
 * Fix blank console log window by using XML character encoding
(arendst#1187)
 * Fix wrong response name for command HlwISet (arendst#1214)
 * Fix
DHT type sensor timeout recognition by distinguish "signal already
there" from "timeout" (arendst#1233)
 * Add fixed color options 1..12 to
command Color
 * Add + (plus) and - (minus) to commands Dimmer
(+10/-10), Speed and Scheme
 * Add + (plus) and - (minus) to command
Color to select 1 out of 12 preset colors
 * Add + (plus) and - (minus)
to command Ct to control ColdWarm led ColorTemperature (+34/-34)
 * Add
commands EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3
0..42500000
 *  to (Re)set Energy Today, Yesterday or Total respectively
in Wh (arendst#406, arendst#685, arendst#1202)
 * Add optional ADS1115 driver as alternative
for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2
 * Add support for
INA219 Voltage and Current sensor to be enabled in user_config.h with
define USE_INA219
 * Add support for Arilux LC11 (Clearing RF home code
when selecting no Arilux module)
 * Add support for WS2812 RGBW
ledstrips to be enabled in user_config.h with define USE_WS2812_CTYPE
(arendst#1156)
 * Add SettingsSaveAll routine to command SaveData to be used
before controlled power down (arendst#1202)
 * Add option PUSHBUTTON_TOGGLE
(SwitchMode 7) to allow toggling on any switch change (arendst#1221)
 * Add new
xdrv_05_ds18x20.ino free from library OneWire and add the following
features:
 *  Add support for DS1822
 *  Add forced setting of 12-bit
resolution for selected device types (arendst#1222)
 *  Add read temperature
retry counter (arendst#1215)
 *  Fix lost sensors by performing sensor probe at
restart only thereby removing dynamic sensor probe (arendst#1215)
 *  Fix
sensor address sorting using ascending sort on sensor type followed by
sensor address
 *  Rewrite JSON resulting in shorter message allowing
more sensors in default firmware image:
 *
"DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}

* Add additional define in user_config.h to select either single sensor
(defines disabled), new multi sensor (USE_DS18X20) or legacy multi
sensor (USE_DS18X20_LEGACY)
 * Add clock support for more different
pixel counts (arendst#1226)
 * Add support for Sonoff Dual R2 (arendst#1249)
 * Add
FriendlyName to web page tab and add program information to web page
footer (arendst#1275)

v5.9.1

5.9.1 20171107
 * Add external sensor function pointer interface to
enable easy sensor addition
 * Add support for ADS1115 to be enabled in
user_config.h and needs libraries i2cdevlib-Core and i2cdevlib-ADS1115
(arendst#338, arendst#660)
 * Fix Backup Configuration file download failure by
defining proper file size (arendst#1115)
 * Fix Exception 26 and empty console
screen after usage of command WakeupDuration (arendst#1133)
 * Fix some changed
iTead web links in README.md (arendst#1137)

v5.9.0

5.9.0 20171030
* Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
* Rewrite code by using command lookup tables and javascript (client
side) web page expansions
* Change HTML/CSS to enable nicer form field entry
* Change default PWM assignments for H801 RGB(CW) led controller to
support optional Color/Dimmer control
*   GPIO04 (W2)    from GPIO_PWM2 to GPIO_USER to be user configurable
for GPIO_PWM5 (second White - Warm if W1 is Cold)
*   GPIO12 (Blue)  GPIO_PWM3 no change
*   GPIO13 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO14 (W1)    from GPIO_PWM1 to GPIO_USER to be user configurable
for GPIO_PWM4 (first White - Cold or Warm)
*   GPIO15 (Red)   from GPIO_PWM5 to GPIO_PWM1
* Change default PWM assignments for MagicHome RGB(W) led controller to
support optional Color/Dimmer control
*   GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO12 (Blue)  from GPIO_PWM5 to GPIO_PWM3
*   GPIO13 (White) GPIO_USER to be user configurable for GPIO_PWM4
(White - Cold or Warm)
*   GPIO14 (Red)   from GPIO_PWM3 to GPIO_PWM1
* Change default PWM assignment for Witty Cloud to support optional
Color/Dimmer control (arendst#976)
*   GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO13 (Blue)  from GPIO_PWM5 to GPIO_PWM3
*   GPIO15 (Red)   from GPIO_PWM3 to GPIO_PWM1
* Change when another module is selected now all GPIO user configuration
is removed
* Change command name IRRemote to IRSend (arendst#956)
* Remove Arduino IDE version too low warning as it interferes with
platformio.ini platform = espressif8266_stage
* Fix command FullTopic entry when using serial or console interface
* Fix possible UDP syslog blocking
* Fix minimum TelePeriod of 10 seconds set by web page
* Fix command GPIOx JSON response (arendst#897)
* Fix inverted relay power on state (arendst#909)
* Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (arendst#930)
* Fix alignment of web page items in some browsers (arendst#935)
* Fix setting all saved power settings to Off when SetOption0
(SaveState) = 0 (arendst#955)
* Fix timezone range from -12/12 to -13/13 (arendst#968)
* Fix Southern Hemisphere TIME_STD/TIME_DST (arendst#968)
* Fix TLS MQTT SSL fingerprint test (arendst#970, arendst#808)
* Fix virtual relay status message used with Color/Dimmer control (arendst#989)
* Fix command IRSend and IRHvac case sensitive parameter regression
introduced with version 5.8.0 (arendst#993)
* Fix pressure calculation for some BMP versions regression introduced
with version 5.8.0i (arendst#974)
* Fix Domoticz Dimmer set to same level not powering on (arendst#945)
* Fix Blocked Loop when erasing large flash using command reset 2
(arendst#1002)
* Fix relay power control when light power control is also configured as
regression from 5.8.0 (arendst#1016)
* Fix Mqtt server mDNS lookup only when MqttHost name is empty (arendst#1026)
* Add debug information to MQTT subscribe
* Add translations to I2Cscan
* Add translation to BH1750 unit lx
* Add light scheme options (Color cycle Up, Down, Random) and moving
WS2812 schemes up by 3
* Add Domoticz counter sensor to IrReceive representing Received IR
Protocol and Data
* Add option 0 to MqttHost to allow empty Mqtt host name
* Add support for Arilux AL-LC01 RGB Led controller (arendst#370)
* Add esp8266 de-blocking to PubSubClient library (arendst#790)
* Add Domoticz sensors for Voltage and Current (arendst#903)
* Add platformio OTA upload support (arendst#928, arendst#934)
* Add warning to webpage when USE_MINIMAL is selected (arendst#929)
* Add smoother movement of hour hand in WS2812 led clock (arendst#936)
* Add support for Magic Home RGBW and some Arilux Led controllers (arendst#940)
* Add command SetOption15 0 (default) for command PWM control or
SetOption15 1 for commands Color/Dimmer control to PWM RGB(CW) leds
(arendst#941)
* Add Domoticz counter sensor to Sonoff Bridge representing Received RF
code (arendst#943)
* Add support for Luani HVIO board
(https://luani.de/projekte/esp8266-hvio/) (arendst#953)
* Add PWM initialization after restart (arendst#955)
* Add IR Receiver support. Disable in user_config.h (arendst#956)
* Add support for inverted PWM (arendst#960)
* Add Sea level pressure calculation and Provide command Altitude (arendst#974)
* Add support for up to 8 relays (arendst#995)
* Add commands RfSync, RfLow, RfHigh, RfHost and RfCode to allow sending
custom RF codes (arendst#1001)
* Add retain to ENERGY messages controlled by command SensorRetain
(arendst#1013)
* Add commands Color2, Color3, Color4, Width2, Width3, Width4 and
SetOption16 to set Ws2812 Clock parameters (arendst#1019)
* Add German language file (arendst#1022)
* Add support for connecting to MQTT brokers without userid and/or
password (arendst#1023)
* Add support for esp8266 core v2.4.0-rc2 (arendst#1024)
* Add commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (arendst#1025)
* Add Polish language file (arendst#1044, arendst#1047)
* Add support for KMC 70011 Power Monitoring Smart Plug (arendst#1045)
* Add support for VEML6070 I2C Ultra Violet level sensor (arendst#1053)
* Add light turn Off Fade (arendst#925)
* Add IrSend command option Panasonic as IrSend {"Protocol":"Panasonic",
"Bits":16388, "Data":<Panasonic data>}
*   where 16388 is 0x4004 hexadecimal (arendst#1014)
* Add retry counter to DHT11/21/22 sensors (arendst#1082)

v5.8.0

5.8.0 20170918
 * Remove the need for NeoPixelBus library for Hue
support
 * Consolidate WS2812 into Sonoff Led for flexible future led
strip library changes
 * Invert WS2812 fade speed to align with Sonoff
led (Speed 1 = fast, Speed 8 = slow)
 * Remove upper case MQTT receive
buffer
 * Reduce code and string length for output of commands Modules
and GPIOs
 * Add Sonoff SC debug information
 * Change syslog service
 *
Removed webserver syslog disable as now no longer needed
 * Increased
default MQTT message size from 368 to 405 bytes while keeping
MQTT_MAX_PACKET_SIZE = 512 (because we can)
 * Fix MQTT Offline or
Remove MQTT retained topic code
 * Fix Domoticz loop when Emulation is
selected
 * Add blink to WS2812 and Sonoff Led (arendst#643)
 * Add option
WIFI_WAIT (5) to command WifiConfig to allow connection retry to same AP
without restart or update flash (arendst#772, arendst#869)
 * Add support for Witty
Cloud (arendst#794)
 * Add GPIO14 to Sonoff Dual (arendst#797, arendst#839)
 * Add support
for Yunshan Wifi Relay (arendst#802)
 * Add GPIO16 input pulldown (arendst#827)
 * Add
timeout to DHT and DS18B20 sensors (arendst#852)
 * Fix watchdog timeout caused
by lack of stack space by moving to heap (arendst#853)
 * Allow LogPort and
MqttPort up to 65535 and add LogPort tot Status 3 (arendst#859)
 * Allow
command SwitchTopic in group mode (arendst#861)
 * Allow command SwitchMode if
no switches are defined (arendst#861)
 * Add optional dimmer parameter to
command Wakeup for WS2812, AiLight, Sonoff B1, Led and BN-SZ01 (arendst#867)
 *
Fix basic On, Off, Toggle, Blink and BlinkOff commands when other
language is selected (arendst#874)