Zerg is a tool for launching an arbitrary number of virtual machines and running a task on all of them at once.
- Tested on Ubuntu 12.04
- YMMV on OSX, however it is recommended you use the provided dev VM
- JSON config files
- Supports vagrant virtualbox, vagrant-aws and vagrant-libvirt providers
- planned support for more hypervisor orchestration tools and providers
- Ruby 1.9 required
Zerg uses a number of open source projects to work properly:
Install Vagrant. Then:
git clone [email protected]:MTNSatelliteComm/zerg.git zerg
cd zerg/dev_env
vagrant plugin install vagrant-berkshelf
vagrant plugin install vagrant-butcher
vagrant plugin install vagrant-omnibus
vagrant up --provision
vagrant ssh
cd /zergSee if Virtualbox is functioning normally:
VBoxManage --version
From Rubygems:
gem install zergrush
From source:
cd zerg
rake install
cd to a folder where you would like to use zerg from and:
zerg init
zerg rush <task name>
'zerg init' command initializes two example tasks - helloworld and helloaws. Try them with:
zerg rush helloworld
Note that prior to trying the helloaws task you will need to set some environment variables:
- AWS_ACCESS_KEY_ID - AWS key id
- AWS_SECRET_ACCESS_KEY - AWS secret key
- AWS_KEY_PAIR - AWS key pair name
- AWS_PRIVATE_KEY_PATH - path to the private key .pem
- AWS_SECURITY_GROUP - name of an AWS security group to use
You will then be able to run the task with:
zerg rush helloaws
Zerg task files are json files that are loaded by zerg, validated, and then transformed into a Vagrantfile. Vagrant is then launched against that generated vagrantfile.
- num_instances - number of virtual machines that'll be started
- synced_folders - array of folders to sync
- host_path - path to folder on the host
- guest_path - path to folder on the guest that host_path will map to
- options - array of options corresponding to Vagrant sync folder options
- tasks - array of tasks. Task definitions vary by driver type. For example: Vagrant driver schema
- vm - description of all VM instances.
- private_ip_range - IP address range in CIDR notation used for all private ip addresses, unless said address is explicitly specified by another option. First host ip in range is always the host machine.
- driver - properties of a hypervisor 'driver'. Currently only Vagrant is supported
- drivertype - Type of the 'driver' Only 'vagrant' is currently supported.
- driveroptions - options for the driver, defined by driver plugin
- instances - array of detailed descriptions of each/some of the vm instances. Last definition in the array is applied to the rest of remaining instances. For example: if num_instances is 3 and there are 2 items in instances array, then first VM will correspond to the first item, and the other two VMs will correspond to the second.
- basebox - basebox file location or URL
- keepalive - keep this instance around after all tasks are finished
- tasks - array of tasks to run. Task properties are defined by driver plugin
- synced_folders - array of synchronized folders
- host_path - path on host
- guest_path - corresponding path on guest
- additional - addtional properties defined by driver plugin
- forwarded_ports - array of port forwarding descriptions
- guest_port port on guest to be forwarded
- host_port - port on host to be forwarded to
- additional - addtional properties defined by driver plugin
- networks - array of networks to be setup - NAT/bridging/etc. Network options are defined by driver plugin
- ssh - SSH options
- username - ssh username
- host - ssh host, normally autodetected
- port - host ssh port
- guest_port - guest ssh port
- private_key_path - path to the private key file
- forward_agent - do SSH agent forwarding
- additional - addtional properties defined by driver plugin
Below example task that:
- will start 5 virtual machines using vagrant
- first machine will be backed by VirtualBox
- other machines will be backed by AWS
- first machine will run some shell commands and will have a private network and a public network, bridged over host's AirPort adapter. It will also stay up after all other tasks are doen running
- second machine will have git installed on it with chef client
- all other machines will run 'starter' cookbook through chef solo
{
"num_instances": 5,
"vm": {
"driver": {
"drivertype": "vagrant",
"driveroptions": [
{
"providertype": "virtualbox",
"provider_options" : {
"gui": false,
"memory": 256
}
},
{
"providertype": "aws",
"provider_options" : {
"instance_type": "t1.micro",
"access_key_id": "YOUR_AWS_ACCESS_KEY_ID",
"secret_access_key": "YOUR_AWS_SECRET",
"keypair_name": "AWS_KEYPAIR_NAME",
"ami": "ami-3fec7956",
"region": "us-east-1",
"security_groups": [ "your_security_group" ]
}
}
]
},
"private_ip_range": "192.168.50.0/24",
"instances": [
{
"basebox": "http://files.vagrantup.com/precise32.box",
"keepalive": true,
"tasks": [
{
"type": "shell",
"inline": "ping -c 3 192.168.50.1; echo \"ZERG RUSH FIRST!\""
}
],
"networks": [
{
"type": "private_network"
},
{
"type": "public_network",
"bridge": "en1: Wi-Fi (AirPort)"
}
],
"synced_folders": [
{
"host_path": "~",
"guest_path": "/zerg/hosthome"
}
],
"forwarded_ports": [
{
"guest_port": 8080,
"host_port": 80
}
],
},
{
"basebox": "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box",
"keepalive": false,
"tasks": [
{
"type": "chef_client",
"chef_server_url": "CHEF_URL",
"validation_key_path": "CHEF_VALIDATION_KEYPATH",
"client_key_path": "CHEF_CLIENT_KEYPATH",
"validation_client_name": "CHEF_VALIDATION_CLIENT_NAME",
"delete_node": true,
"delete_client": true,
"run_list": ["recipe[git]"]
}
],
"ssh": {
"username": "ubuntu",
"private_key_path": "PATH_TO_YOUR_PK"
}
},
{
"basebox": "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box",
"keepalive": false,
"tasks": [
{
"type": "chef_solo",
"cookbooks_path": ["~/cookbooks"],
"run_list": ["recipe[starter]"]
}
],
"ssh": {
"username": "ubuntu",
"private_key_path": "PATH_TO_YOUR_PK"
}
}
]
}
}
CLI help is available from the gem:
zerg help
By default Zerg will look for '.hive' in the current directory. You can override this location by setting an enviroment variable:
export HIVE_CWD=/path/to/wherever/you/want
cd zerg
bundle exec cucumber features/
Zerg plugins are ruby gems. Each plugin gem must have an 'init.rb' file lib/gem_name/init.rb
required in the init.rb file:
require 'zerg'
class Vagrant < ZergGemPlugin::Plugin "/driver"
def rush hive_location, task_name, task_hash, debug
# 'zerg rush <task>' functionality.
end
def clean hive_location, task_name, task_hash, debug
# 'zerg clean <task>' functionality.
end
def halt hive_location, task_name, task_hash, debug
# 'zerg halt <task>' functionality
end
def task_schema
# return a chunk of JSON schema for defining task item in tasks array
end
def option_schema
# return a chunk of JSON schema for defining driver options
end
def folder_schema
# return a chunk of JSON schema for defining driver-specific sync_folder options
end
def port_schema
# return a chunk of JSON schema for defining driver-specific port forwarding options
end
def ssh_schema
# return a chunk of JSON schema for defining driver-specific ssh options
end
end
also, in the gem's gemspec file the following metadata must be present:
Gem::Specification.new do |s|
s.name = "your_plugin"
...
# metadata that marks this as a zergrush plugin
s.metadata = { "zergrushplugin" => "driver" }
end
Vagrant inside vagrant
Running 64bit virtualbox VMs inside dev_env VM will most likely fail:
https://forums.virtualbox.org/viewtopic.php?f=1&t=20589&start=15
You should still be able to run 32bit virtualbox boxes inside another VM though.
Security
JSON config files allow for snippets of ruby code to be passed through (#{ENV['BLAH']})
Not a problem locally, but would be BAD for a REST API