docs: Update links to K8s service mesh annotations (hashicorp#12652)

The list of supported annotations for Consul service mesh were moved
from /docs/k8s/connect to /docs/k8s/annotations-and-labels in PR
hashicorp#12323.

This commit updates various across the site to point to the new
URL for these annotations.

website/content/docs/connect/transparent-proxy.mdx

@@ -47,7 +47,7 @@ proxy, and dial the local listener to reach the appropriate upstream. Users woul
 specific services to talk to one another. Transparent proxying reduces this duplication, by determining upstreams
 implicitly from Service Intentions. Explicit upstreams are still supported in the [proxy service
 registration](/docs/connect/registration/service-registration) on VMs and via the
-[annotation](/docs/k8s/connect#consul-hashicorp-com-connect-service-upstreams) in Kubernetes.
+[annotation](/docs/k8s/annotations-and-labels#consul-hashicorp-com-connect-service-upstreams) in Kubernetes.
 
 To support transparent proxying, Consul's CLI now has a command
 [`consul connect redirect-traffic`](/commands/connect/redirect-traffic) to redirect traffic through an inbound and
@@ -153,20 +153,21 @@ or the Pod annotation `consul.hashicorp.com/transparent-proxy-overwrite-probes`.
 Pods with transparent proxy enabled will have an init container injected that sets up traffic redirection for all
 inbound and outbound traffic through the sidecar proxies. This will include all traffic by default, with the ability to
 configure exceptions on a per-Pod basis. The following Pod annotations allow you to exclude certain traffic from redirection to the sidecar proxies:
-- [`consul.hashicorp.com/transparent-proxy-exclude-inbound-ports`](/docs/k8s/connect#consul-hashicorp-com-transparent-proxy-exclude-inbound-ports)
-- [`consul.hashicorp.com/transparent-proxy-exclude-outbound-ports`](/docs/k8s/connect#consul-hashicorp-com-transparent-proxy-exclude-outbound-ports)
-- [`consul.hashicorp.com/transparent-proxy-exclude-outbound-cidrs`](/docs/k8s/connect#consul-hashicorp-com-transparent-proxy-exclude-outbound-cidrs)
-- [`consul.hashicorp.com/transparent-proxy-exclude-uids`](/docs/k8s/connect#consul-hashicorp-com-transparent-proxy-exclude-uids)
+
+- [`consul.hashicorp.com/transparent-proxy-exclude-inbound-ports`](/docs/k8s/annotations-and-labels#consul-hashicorp-com-transparent-proxy-exclude-inbound-ports)
+- [`consul.hashicorp.com/transparent-proxy-exclude-outbound-ports`](/docs/k8s/annotations-and-labels#consul-hashicorp-com-transparent-proxy-exclude-outbound-ports)
+- [`consul.hashicorp.com/transparent-proxy-exclude-outbound-cidrs`](/docs/k8s/annotations-and-labels#consul-hashicorp-com-transparent-proxy-exclude-outbound-cidrs)
+- [`consul.hashicorp.com/transparent-proxy-exclude-uids`](/docs/k8s/annotations-and-labels#consul-hashicorp-com-transparent-proxy-exclude-uids)
 
 
 ## Known Limitations
 
 * Traffic can only be transparently proxied when the address dialed corresponds to the address of a service in the
 transparent proxy's datacenter. Services can also dial explicit upstreams in other datacenters without transparent proxy, for example, by adding an
-[annotation](/docs/k8s/connect#consul-hashicorp-com-connect-service-upstreams) such as
+[annotation](/docs/k8s/annotations-and-labels#consul-hashicorp-com-connect-service-upstreams) such as
 `"consul.hashicorp.com/connect-service-upstreams": "my-service:1234:dc2"` to reach an upstream service called `my-service`
 in the datacenter `dc2`.
-* In the deployment configuration where a [single Consul datacenter spans multiple Kubernetes clusters](/docs/k8s/installation/deployment-configurations/single-dc-multi-k8s), services in one Kubernetes cluster must explicitly dial a service in another Kubernetes cluster using the [consul.hashicorp.com/connect-service-upstreams](/docs/k8s/connect#consul-hashicorp-com-connect-service-upstreams) annotation. An example would be
+* In the deployment configuration where a [single Consul datacenter spans multiple Kubernetes clusters](/docs/k8s/installation/deployment-configurations/single-dc-multi-k8s), services in one Kubernetes cluster must explicitly dial a service in another Kubernetes cluster using the [consul.hashicorp.com/connect-service-upstreams](/docs/k8s/annotations-and-labels#consul-hashicorp-com-connect-service-upstreams) annotation. An example would be
 `"consul.hashicorp.com/connect-service-upstreams": "my-service:1234"`, where `my-service` is the service that exists in another Kubernetes cluster and is exposed on port `1234`. Although Transparent Proxy is enabled, KubeDNS is not utilized when communicating between services existing on separate Kubernetes clusters.
 * When dialing headless services the request will be proxied using a plain TCP proxy with a 5s connection timeout.
 Currently the upstream's protocol and connection timeout are not considered.

website/content/docs/k8s/connect/index.mdx

@@ -192,7 +192,7 @@ When ACLs are enabled with default `deny` policy,
 you must supply an [intention](/docs/connect/intentions) to tell Consul which upstream you need to talk to.
 
 When upstreams are specified explicitly with the
-[`consul.hashicorp.com/connect-service-upstreams` annotation](/docs/k8s/connect#consul-hashicorp-com-connect-service-upstreams),
+[`consul.hashicorp.com/connect-service-upstreams` annotation](/docs/k8s/annotations-and-labels#consul-hashicorp-com-connect-service-upstreams),
 the injector will also set environment variables `<NAME>_CONNECT_SERVICE_HOST`
 and `<NAME>_CONNECT_SERVICE_PORT` in every container in the Pod for every defined
 upstream. This is analogous to the standard Kubernetes service environment variables, but

website/content/docs/k8s/connect/ingress-controllers.mdx

@@ -12,22 +12,22 @@ description: Configuring Ingress Controllers With Consul On Kubernetes
 [Transparent Proxy](/docs/connect/transparent-proxy) mode enabled.
 
 This page describes a general approach for integrating Ingress Controllers with Consul on Kubernetes to secure traffic from the Controller
-to the backend services by deploying sidecars along with your Ingress Controller. This allows Consul to transparently secure traffic from the ingress point through the entire traffic flow of the service. 
+to the backend services by deploying sidecars along with your Ingress Controller. This allows Consul to transparently secure traffic from the ingress point through the entire traffic flow of the service.
 
-If you are looking for a fully supported solution for ingress traffic into Consul Service Mesh, please visit [Consul API Gateway](https://www.consul.io/docs/api-gateway) for instruction on how to install Consul API Gateway along with Consul on Kubernetes. 
+If you are looking for a fully supported solution for ingress traffic into Consul Service Mesh, please visit [Consul API Gateway](/docs/api-gateway) for instruction on how to install Consul API Gateway along with Consul on Kubernetes.
 
 A few steps are generally required to enable an Ingress controller to join the mesh and pass traffic through to a service:
 
 * Enable connect-injection via an annotation on the Ingress Controller's deployment: `consul.hashicorp.com/connect-inject` is `true`.
 
 * Using the following annotations on the Ingress controller's deployment, set up exclusion rules for its ports.
-   * [`consul.hashicorp.com/transparent-proxy-exclude-inbound-ports`](/docs/k8s/connect#consul-hashicorp-com-transparent-proxy-exclude-inbound-ports) - Provides the ability to exclude a list of ports for
+   * [`consul.hashicorp.com/transparent-proxy-exclude-inbound-ports`](/docs/k8s/annotations-and-labels#consul-hashicorp-com-transparent-proxy-exclude-inbound-ports) - Provides the ability to exclude a list of ports for
 inbound traffic that the service exposes from redirection. Typical configurations would require all inbound service ports
 for the controller to be included in this list.
-   * [`consul.hashicorp.com/transparent-proxy-exclude-outbound-ports`](/docs/k8s/connect#consul-hashicorp-com-transparent-proxy-exclude-outbound-ports) - Provides the ability to exclude a list of ports for
+   * [`consul.hashicorp.com/transparent-proxy-exclude-outbound-ports`](/docs/k8s/annotations-and-labels#consul-hashicorp-com-transparent-proxy-exclude-outbound-ports) - Provides the ability to exclude a list of ports for
 outbound traffic that the service exposes from redirection. These would be outbound ports used by your ingress controller
   which expect to skip the mesh and talk to non-mesh services.
-   * [`consul.hashicorp.com/transparent-proxy-exclude-outbound-cidrs`](/docs/k8s/connect#consul-hashicorp-com-transparent-proxy-exclude-outbound-cidrs) - Provides the ability to exclude a list of CIDRs that
+   * [`consul.hashicorp.com/transparent-proxy-exclude-outbound-cidrs`](/docs/k8s/annotations-and-labels#consul-hashicorp-com-transparent-proxy-exclude-outbound-cidrs) - Provides the ability to exclude a list of CIDRs that
 the service communicates with for outbound requests from redirection. It is somewhat common that an Ingress controller
 will expect to make API calls to the Kubernetes service for service/endpoint management. As such including the ClusterIP of the
 Kubernetes service is common.

website/content/docs/k8s/installation/deployment-configurations/single-dc-multi-k8s.mdx

@@ -188,7 +188,7 @@ $ helm install cluster2 --values cluster2-config.yaml hashicorp/consul
 
 ## Verifying the Consul Service Mesh works
 
-~> When Transparent proxy is enabled, services in one Kubernetes cluster that need to communicate with a service in another Kubernetes cluster must have a explicit upstream configured through the ["consul.hashicorp.com/connect-service-upstreams"](/docs/k8s/connect#consul-hashicorp-com-connect-service-upstreams) annotation.
+~> When Transparent proxy is enabled, services in one Kubernetes cluster that need to communicate with a service in another Kubernetes cluster must have a explicit upstream configured through the ["consul.hashicorp.com/connect-service-upstreams"](/docs/k8s/annotations-and-labels#consul-hashicorp-com-connect-service-upstreams) annotation.
 
 Now that we have our Consul cluster in multiple k8s clusters up and running, we will
 deploy two services and verify that they can connect to each other.