NOTE: THIS PROJECT IS UNDER DEVELOPMENT AND MAY NOT FUNCTION AS EXPECTED UNTIL THIS MESSAGE GOES AWAY

Introduction

nf-core/pathogensurveillance is a population genomic pipeline for pathogen diagnosis, variant detection, and biosurveillance. The pipeline accepts the paths to raw reads for one or more organisms (in the form of a CSV file) and creates reports in the form of interactive HTML reports or PDF documents. Significant features include the ability to analyze unidentified eukaryotic and prokaryotic samples, creation of reports for multiple user-defined groupings of samples, automated discovery and downloading of reference assemblies from NCBI RefSeq, and rapid initial identification based on k-mer sketches followed by a more robust core genome phylogeny and SNP-based phylogeny.

The pipeline is built using Nextflow, a workflow tool to run tasks across multiple compute infrastructures in a very portable manner. It uses Docker/Singularity containers making installation trivial and results highly reproducible. The Nextflow DSL2 implementation of this pipeline uses one container per process which makes it much easier to maintain and update software dependencies. Where possible, these processes have been submitted to and installed from nf-core/modules in order to make them available to all nf-core pipelines, and to everyone within the Nextflow community!

On release, automated continuous integration tests run the pipeline on a full-sized dataset on the AWS cloud infrastructure. This ensures that the pipeline runs on AWS, has sensible resource allocation defaults set to run on real-world data sets, and permits the persistent storage of results to benchmark between pipeline releases and other analysis sources.The results obtained from the full-sized test can be viewed on the nf-core website.

Pipeline summary

Usage

Note

If you are new to Nextflow and nf-core, please refer to this page on how to set-up Nextflow. Make sure to test your setup with -profile test before running the workflow on actual data.

First, prepare a samplesheet with your input data that looks as follows:

nextflow run nf-core/pathogensurveillance -r dev -profile RUN_TOOL,xanthomonas_small -resume --out_dir test_output

Note that some form of configuration will be needed so that Nextflow knows how to fetch the required software. This is usually done in the form of a config profile (RUN_TOOL in the example command above). You can chain multiple config profiles in a comma-separated string.

• The pipeline comes with config profiles called docker, singularity, podman, shifter, charliecloud and conda which instruct the pipeline to use the named tool for software management. For example, -profile xanthomonas_small,docker.
• Please check nf-core/configs to see if a custom config file to run nf-core pipelines already exists for your Institute. If so, you can simply use -profile <institute> in your command. This will enable either docker or singularity and set the appropriate execution settings for your local compute environment.
• If you are using singularity, please use the nf-core download command to download images first, before running the pipeline. Setting the NXF_SINGULARITY_CACHEDIR or singularity.cacheDir Nextflow options enables you to store and re-use the images from a central location for future pipeline runs.
• If you are using conda, it is highly recommended to use the NXF_CONDA_CACHEDIR or conda.cacheDir settings to store the environments in a central location for future pipeline runs.

-->

Now, you can run the pipeline using:

nextflow run nf-core/pathogensurveillance -r dev -profile RUN_TOOL -resume --sample_data <CSV> --out_dir <OUTDIR> --download_bakta_db

nextflow run nf-core/pathogensurveillance \
   -profile <docker/singularity/.../institute> \
   --input samplesheet.csv \
   --outdir <OUTDIR>

Documentation

For more details and further functionality, please refer to the usage documentation and the parameter documentation.

Documentation is currently under development, but can be found here:

https://grunwaldlab.github.io/pathogensurveillance_documentation

Input format

The primary input to the pipeline is a CSV (comma comma-separated value) file, specified using the --sample_data option. This can be made in a spreadsheet program like LibreOffice Calc or Microsoft Excel by exporting to CSV. Columns can be in any order and unneeded columns can be left out or left blank. Column names are case insensitive and spaces are equivalent to underscores and can be left out. Only a single column containing either paths to raw sequence data, SRA (Sequence Read Archive) accessions, or NCBI queries to search the SRA is required and each sample can have values in different columns. Any columns not recognized by pathogensurveillance will be ignored, allowing users to adapt existing sample metadata table by adding new columns. Below is a description of each column used by pathogensurveillance:

• sample_id: The unique identifier for each sample. This will be used in file names to distinguish samples in the output. Each sample ID must correspond to a single source of sequence data (e.g. the path and ncbi_accession columns), although the same sequence data can be used by different IDs. Any values supplied that correspond to different sources of sequence data or contain characters that cannot appear in file names (/:*?"<>| .) will be modified automatically. If not supplied, it will be inferred from the path, ncbi_accession, or name columns.
• name: A human-readable label for the sample that is used in plots and tables. If not supplied, it will be inferred from sample_id.
• description: A longer human-readable label that is used in plots and tables. If not supplied, it will be inferred from name.
• path: Path to input sequence data, typically gzipped FASTQ files. When paired end sequencing is used, this is used for the forward read's data and path_2 is used for the reverse reads. This can be a local file path or a URL to an online location. The sequence_type column must have a value.
• path_2: Path to the FASTQ files for the reverse read when paired-end sequencing is used. This can be a local file path or a URL to an online location. The sequence_type column must have a value.
• ncbi_accession: An SRA accession ID for reads to be downloaded and used as samples. Values in the sequence_type column will be looked up if not supplied.
• ncbi_query: A valid NCBI search query to search the SRA for reads to download and use as samples. This will result in an unknown number of samples being analyzed. The total number downloaded is limited by the ncbi_query_max column. Values in the sample_id, name, and description columns will be append to that supplied by the user. Values in the sequence_type column will be looked up and does not need to be supplied by the user.
• ncbi_query_max: The maximum number or percentage of samples downloaded for the corresponding query in the ncbi_query column. Adding a % to the end of a number indicates a percentage of the total number of results instead of a count. A random of subset of results will be downloaded if ncbi_query_max is less than "100%" or the total number of results.
• sequence_type: The type of sequencing used to produce reads for the reads_1 and reads_2 columns. Valid values include anything containing the words "illumina", "nanopore", or "pacbio". Will be looked up automatically for ncbi_accession and ncbi_query inputs but must be supplied by the user for path inputs.
• report_group_ids: How to group samples into reports. For every unique value in this column a report will be generated. Samples can be assigned to multiple reports by separating group IDs by ";". For example all;subset will put the sample in both all and subset report groups. Samples will be added to a default group if this is not supplied.
• color_by: The names of other columns that contain values used to color samples in plots and figures in the report. Multiple column names can be separated by ";". Specified columns can contain either categorical factors or specific colors, specified as a hex code. By default, samples will be one color and references another.
• ploidy: The ploidy of the sample. Should be a number. Defaults to "1".
• enabled: Either "TRUE" or "FALSE", indicating whether the sample should be included in the analysis or not. Defaults to "TRUE".
• ref_group_ids: One or more reference group IDs separated by ";". These are used to supply specific references to specific samples. These IDs correspond to IDs listed in the ref_group_ids or ref_id columns of the reference metadata CSV.

Additionally, users can supply a reference metadata CSV that can be used to assign custom references to particular samples using the --reference_data option. If not provided, the pipeline will download and choose references to use automatically. References are assigned to samples if they share a reference group ID in the ref_group_ids columns that can appear in both input CSVs. The reference metadata CSV or the sample metadata CSV can have the following columns:

• ref_group_ids: One or more reference group IDs separated by ";". These are used to group references and supply an ID that can be used in the ref_group_ids column of the sample metadata CSV to assign references to particular samples.
• ref_id: The unique identifier for each user-defined reference genome. This will be used in file names to distinguish samples in the output. Each reference ID must correspond to a single source of reference data (The ref_path, ref_ncbi_accession, and ref_ncbi_query columns), although the same reference data can be used by multiple IDs. Any values that correspond to different sources of reference data or contain characters that cannot appear in file names (/:*?"<>| .) will be modified automatically. If not supplied, it will be inferred from the path, ref_name columns or supplied automatically when ref_ncbi_accession or ref_ncbi_query are used.
• ref_id: The unique identify for each reference input. This will be used in file names to distinguish references in the output. Each sample ID must correspond to a single source of reference data (e.g. the ref_path and ref_ncbi_accession columns), although the same sequence data can be used by different IDs. Any values supplied that correspond to different sources of reference data or contain characters that cannot appear in file names (/:*?"<>| .) will be modified automatically. If not supplied, it will be inferred from the ref_path, ref_ncbi_accession, or ref_name columns.
• ref_name: A human-readable label for user-defined reference genomes that is used in plots and tables. If not supplied, it will be inferred from ref_id. It will be supplied automatically when the ref_ncbi_query column is used.
• ref_description: A longer human-readable label for user-defined reference genomes that is used in plots and tables. If not supplied, it will be inferred from ref_name. It will be supplied automatically when the ref_ncbi_query column is used.
• ref_path: Path to user-defined reference genomes for each sample. This can be a local file path or a URL to an online location.
• ref_ncbi_accession: RefSeq accession ID for a user-defined reference genome. These will be automatically downloaded and used as input.
• ref_ncbi_query: A valid NCBI search query to search the assembly database for genomes to download and use as references. This will result in an unknown number of references being downloaded. The total number downloaded is limited by the ref_ncbi_query_max column. Values in the ref_id, ref_name, and ref_description columns will be append to that supplied by the user.
• ref_ncbi_query_max: The maximum number or percentage of references downloaded for the corresponding query in the ref_ncbi_query column. Adding a % to the end of a number indicates a percentage of the total number of results instead of a count. A random of subset of results will be downloaded if ncbi_query_max is less than "100%" or the total number of results.
• ref_primary_usage: Controls how the reference is used in the analysis in cases where a single "best" reference is required, such as for variant calling. Can be one of "optional" (can be used if selected by the analysis), "required" (will always be used), "exclusive" (only those marked "exclusive" will be used), or "excluded" (will not be used).
• ref_contextual_usage: Controls how the reference is used in the analysis in cases where multiple references are required to provide context for the samples, such as for phylogeny. Can be one of "optional" (can be used if selected by the analysis), "required" (will always be used), "exclusive" (only those marked "exclusive" will be used), or "excluded" (will not be used).
• ref_color_by: The names of other columns that contain values used to color references in plots and figures in the report. Multiple column names can be separated by ";". Specified columns can contain either categorical factors or specific colors, specified as a hex code. By default, samples will be one color and references another.
• ref_enabled: Either "TRUE" or "FALSE", indicating whether the reference should be included in the analysis or not. Defaults to "TRUE".

Credits

nf-core/pathogensurveillance was originally written by Zachary S.L. Foster, Camilo Parada-Rojas, Logan Blair, Martha Sudermann, Nicholas C. Cauldron, Fernanda I. Bocardo, Ricardo Alcalá-Briseño, Hung Phan, Jeff H. Chang, Niklaus J. Grünwald

To see the results of an example test run with a full size dataset refer to the results tab on the nf-core website pipeline page. For more details about the output files and reports, please refer to the output documentation.

Credits

nf-core/pathogensurveillance was originally written by Zachary S.L. Foster, Martha Sudermann, Nicholas C. Cauldron, Fernanda I. Bocardo, Hung Phan, Jeff H. Chang, Niklaus J. Grünwald.

Contributions and Support

If you would like to contribute to this pipeline, please see the contributing guidelines.

For further information or help, don't hesitate to get in touch on the Slack #pathogensurveillance channel (you can join with this invite).

Citations

An extensive list of references for the tools used by the pipeline can be found in the CITATIONS.md file.

You can cite the nf-core publication as follows:

The nf-core framework for community-curated bioinformatics pipelines.

Philip Ewels, Alexander Peltzer, Sven Fillinger, Harshil Patel, Johannes Alneberg, Andreas Wilm, Maxime Ulysse Garcia, Paolo Di Tommaso & Sven Nahnsen.

Nat Biotechnol. 2020 Feb 13. doi: 10.1038/s41587-020-0439-x.