An easier way to update the firmware of your Raspberry Pi
To install the tool, run the following command:
sudo wget http://goo.gl/1BOfJ -O /usr/bin/rpi-update && sudo chmod +x /usr/bin/rpi-update
If you get errors relating to certificates, then the problem is likely due to one of two things. Either the time is set incorrectly on your Raspberry Pi, which you can fix by simply setting the time using NTP. The other possible issue is that you might not have the ca-certificates package installed, and so GitHub's SSL certificate isn't trusted. If you're on Debian, you can resolve this by typing:
sudo apt-get install ca-certificates
To then update your firmware, simply run the following command:
sudo rpi-update
To upgrade/downgrade to a specific firmware revision, specify it's Git hash as follows:
rpi-update
If you'd like to set a different GPU/ARM memory split, then define gpu_mem in /boot/config.txt.
There are a number of options for experts you might like to use, these are all environment variables you must set if you wish to use them.
SKIP_KERNEL=1 rpi-update
Will update everything EXCEPT the kernel.img files and the kernel modules. Use with caution, some firmware updates might depend a kernel update.
ROOT_PATH=/media/root BOOT_PATH=/media/boot rpi-update
Allows you to perform an "offline" update, ie update firmware on an SD card you're not currently booted from. Useful for installing firmware/kernel to a non-RPI customised image. Be careful, you must specify both options or neither. Specifying only one will not work.