qucs_pl.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="pl">
<context>
    <name>AboutDialog</name>
    <message>
        <location filename="../qucs/dialogs/aboutdialog.cpp" line="+120"/>
        <source>About Qucs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Version</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+1"/>
        <location line="+1"/>
        <source>Copyright (C)</source>
        <translation>Copyright (C)</translation>
    </message>
    <message>
        <location line="-82"/>
        <source>GUI programmer, Verilog-A dynamic loader</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-13"/>
        <source>project maintainer, simulator interface and GUI design</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>component models, documentation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Xyce integration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Testing, examples</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Qt6 support, general improvements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Digital simulation, general improvements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>CI setup, build system, MacOS support</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>testing, general bugfixes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>testing, modelling and documentation, tutorial contributor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>testing, modelling, Octave.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>bondwire and rectangular waveguide model implementation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>GUI programmer, release</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>filter synthesis (qucs-activefilter), SPICE integration (NGSPICE, Xyce)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>testing, general fixes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>refactoring, modularity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-13"/>
        <location line="+14"/>
        <source>RF design tools</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-15"/>
        <source>Schematic rendering engine, refactoring</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Refactoring, general improvements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>founder of the project, GUI programmer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Programmer of simulator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>webpages and translator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>tester and applyer of Stefan&apos;s patches, author of documentation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>coplanar line and filter synthesis code, documentation contributor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>some filter synthesis code and attenuator synthesis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+5"/>
        <source>GUI programmer, Qt4 porter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-4"/>
        <source>programmer of the Verilog-AMS interface</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>equation solver contributions, exponential sources, author of documentation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>temperature model for rectangular waveguide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>GUI programmer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>German by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Polish by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Romanian by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>French by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Portuguese by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Spanish by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Japanese by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Italian by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hebrew by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Swedish by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Turkish by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hungarian by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Russian by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Czech by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Catalan by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ukrainian by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Arabic by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Kazakh by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Chinese by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+57"/>
        <source>Home Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Documentation start page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Bugtracker page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Forum</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+53"/>
        <source>Qucs-S project team:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Based on Qucs project developed by:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-45"/>
        <source>Authors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Translations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Support</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>License</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&amp;OK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+41"/>
        <source>Previous Developers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>GUI translations :</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AbstractSpiceKernel</name>
    <message>
        <location filename="../qucs/extsimkernels/abstractspicekernel.cpp" line="+1339"/>
        <source>Simulate</source>
        <translation type="unfinished">Sumuluj</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Failed to create dataset file </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Check write permission of the directory </source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ArrowDialog</name>
    <message>
        <location filename="../qucs/paintings/arrowdialog.cpp" line="+36"/>
        <source>Edit Arrow Properties</source>
        <translation>Edytuj właściwości strzałki</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Head Length: </source>
        <translation>Długość główki:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>      Head Width: </source>
        <translation>Szerokość główki:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Line color: </source>
        <translation>Kolor linii:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>      Line Width: </source>
        <translation>Szerokość linii:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Line style: </source>
        <translation>Typ linii:</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>solid line</source>
        <translation>linia ciągła</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash line</source>
        <translation>linia przerywana</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dot line</source>
        <translation>linia kropkowa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot line</source>
        <translation>linia kreska kropka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot dot line</source>
        <translation>linia kreska kropka kropka</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Arrow head: </source>
        <translation>Głowa strzałki:</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>two lines</source>
        <translation>dwie linie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>filled</source>
        <translation>wypełniony</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
</context>
<context>
    <name>AuxFilesDialog</name>
    <message>
        <location filename="../qucs/dialogs/settingsdialog.cpp" line="+360"/>
        <source>Select</source>
        <translation type="unfinished">Zaznacz</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation type="unfinished">Porzuć</translation>
    </message>
</context>
<context>
    <name>ChangeDialog</name>
    <message>
        <location filename="../qucs/dialogs/changedialog.cpp" line="+42"/>
        <source>Change Component Properties</source>
        <translation>Zmień właściwości elementu</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Components:</source>
        <translation>Elementy:</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>all components</source>
        <translation>wszystkie elementy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>resistors</source>
        <translation>rezystory</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>capacitors</source>
        <translation>kondensatory</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>inductors</source>
        <translation>cewki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>transistors</source>
        <translation>tranzystory</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Component Names:</source>
        <translation>Nazwy elementów:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Property Name:</source>
        <translation>Właściwość:</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>New Value:</source>
        <translation>Nowa wartość:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Replace</source>
        <translation>Zamień</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+75"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="-25"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Regular expression for component name is invalid.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Found Components</source>
        <translation>Znalezione elementy</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Change properties of
</source>
        <translation>Zmień właściwości
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>these components ?</source>
        <translation>te elementy ?</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Yes</source>
        <translation>Tak</translation>
    </message>
</context>
<context>
    <name>ComponentDialog</name>
    <message>
        <location filename="../qucs/components/componentdialog.cpp" line="+53"/>
        <source>Edit Component Properties</source>
        <translation>Edytuj właściwości elementu</translation>
    </message>
    <message>
        <location line="+46"/>
        <source>Sweep</source>
        <translation>Przemiatanie</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+9"/>
        <location line="+34"/>
        <location line="+9"/>
        <location line="+9"/>
        <location line="+9"/>
        <location line="+16"/>
        <location line="+109"/>
        <location line="+95"/>
        <source>display in schematic</source>
        <translation>wyświetlaj na schemacie</translation>
    </message>
    <message>
        <location line="-287"/>
        <source>Simulation:</source>
        <translation>Symulacja:</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Sweep Parameter:</source>
        <translation>Parametr przemiatany:</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Type:</source>
        <translation>Typ:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>linear</source>
        <translation>liniowo</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>logarithmic</source>
        <translation>logarytmicznie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>list</source>
        <translation>lista wartości</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>constant</source>
        <translation>stała</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Values:</source>
        <translation>Wartości:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Start:</source>
        <translation>Start:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Stop:</source>
        <translation>Stop:</translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+1127"/>
        <location line="+22"/>
        <source>Step:</source>
        <translation>Krok:</translation>
    </message>
    <message>
        <location line="-1142"/>
        <source>Number:</source>
        <translation>Liczba:</translation>
    </message>
    <message>
        <location line="+90"/>
        <location line="+33"/>
        <source>Properties</source>
        <translation>Właściwości</translation>
    </message>
    <message>
        <location line="-16"/>
        <source>Name:</source>
        <translation>Nazwa:</translation>
    </message>
    <message>
        <location line="+45"/>
        <source>Name</source>
        <translation>Nazwa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Value</source>
        <translation>Wartość</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>display</source>
        <translation>wyświetlaj</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Description</source>
        <translation>Opis</translation>
    </message>
    <message>
        <location line="+43"/>
        <source>Edit</source>
        <translation>Edycja</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Browse</source>
        <translation>Pokaż</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Add</source>
        <translation>Dodaj</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Remove</source>
        <translation>Usuń</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Move Up</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Move Down</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Fill from SPICE .MODEL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+13"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Apply</source>
        <translation>Zastosuj</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+29"/>
        <location line="+93"/>
        <location line="+54"/>
        <location line="+228"/>
        <location line="+309"/>
        <location line="+315"/>
        <location line="+66"/>
        <location line="+30"/>
        <location line="+24"/>
        <source>yes</source>
        <translation>tak</translation>
    </message>
    <message>
        <location line="-1117"/>
        <location line="+93"/>
        <location line="+282"/>
        <location line="+305"/>
        <location line="+320"/>
        <source>no</source>
        <translation>nie</translation>
    </message>
    <message>
        <location line="-394"/>
        <source>Select a file</source>
        <translation>Wybierz plik</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>All Files</source>
        <translation>Wszystkie pliki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Touchstone files</source>
        <translation>Plik Touchstone</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>CSV files</source>
        <translation>Pliki CSV</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>SPICE files</source>
        <translation>Plik SPICE</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>VHDL files</source>
        <translation>Plik VHDL</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Verilog files</source>
        <translation>Plik Verilog</translation>
    </message>
    <message>
        <location line="+222"/>
        <source>Points per decade:</source>
        <translation>Liczba punktów w dekadzie:</translation>
    </message>
</context>
<context>
    <name>CustomSimDialog</name>
    <message>
        <location filename="../qucs/extsimkernels/customsimdialog.cpp" line="+42"/>
        <location line="+55"/>
        <source>Edit SPICE code</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-54"/>
        <source>Component: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>display in schematic</source>
        <translation type="unfinished">wyświetlaj na schemacie</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Variables to plot (semicolon separated)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Extra outputs (semicolon separated; raw-SPICE or XYCE-STD or scalars print format)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Apply</source>
        <translation type="unfinished">Zastosuj</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation type="unfinished">Porzuć</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>OK</source>
        <translation type="unfinished">OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Find all variables</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Find all outputs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>SPICE code editor</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DiagramDialog</name>
    <message>
        <location filename="../qucs/diagrams/diagramdialog.cpp" line="+122"/>
        <source>Edit Diagram Properties</source>
        <translation>Edycja właściwości wykresu</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>left Axis</source>
        <translation>Oś y:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>right Axis</source>
        <translation>prawa Oś</translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+11"/>
        <source>y-Axis</source>
        <translation>Oś y</translation>
    </message>
    <message>
        <location line="-8"/>
        <location line="+5"/>
        <source>smith Axis</source>
        <translation>Oś wykresu Smitha</translation>
    </message>
    <message>
        <location line="-4"/>
        <location line="+3"/>
        <source>polar Axis</source>
        <translation>Oś wykresu polarnego</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>z-Axis</source>
        <translation>Oś z</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Graph Input</source>
        <translation>Dane wejściowe</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Plot Vs.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Number Notation: </source>
        <translation>Notacja numeryczna:</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>real/imaginary</source>
        <translation>część rzeczywista/urojona </translation>
    </message>
    <message>
        <location line="+1"/>
        <source>magnitude/angle (degree)</source>
        <translation>amplituda/faza (w stopniach)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>magnitude/angle (radian)</source>
        <translation>amplituda/faza (w radianach)</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Precision:</source>
        <translation>Precyzja:</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Color:</source>
        <translation>Kolor:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Style:</source>
        <translation>Typ:</translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+164"/>
        <source>solid line</source>
        <translation>linia ciągła</translation>
    </message>
    <message>
        <location line="-163"/>
        <location line="+164"/>
        <source>dash line</source>
        <translation>linia przerywana</translation>
    </message>
    <message>
        <location line="-163"/>
        <location line="+164"/>
        <source>dot line</source>
        <translation>linia punktowa</translation>
    </message>
    <message>
        <location line="-162"/>
        <source>long dash line</source>
        <translation>linia przerywana (długa)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>stars</source>
        <translation>gwiazdki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>circles</source>
        <translation>kółka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>arrows</source>
        <translation>strzałki</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Thickness:</source>
        <translation>Grubość:</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>y-Axis:</source>
        <translation>Oś y:</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>Dataset</source>
        <translation>Zbiór wyników</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Data from simulator:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Name</source>
        <translation>Nazwa</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Type</source>
        <translation>Typ</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Size</source>
        <translation>Rozmiar</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Graph</source>
        <translation>Krzywa</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>New Graph</source>
        <translation>Nowa krzywa</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Delete Graph</source>
        <translation>Usuń krzywą</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Data</source>
        <translation>Dane</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>x-Axis Label:</source>
        <translation>Nazwa osi x: </translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+8"/>
        <source>Label:</source>
        <translation>Nazwa:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>&lt;b&gt;Label text&lt;/b&gt;: Use LaTeX style for special characters, e.g. \tau</source>
        <translation>&lt;b&gt;Nazwa&lt;/b&gt;: Użuj stylu LaTeXowego dla znaków specjalnych, np. \tau</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>show Grid</source>
        <translation>pokaż siatkę</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Grid Color:</source>
        <translation>Kolor siatki:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Grid Style: </source>
        <translation>Typ siatki:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>dash dot line</source>
        <translation>linia kreska kropka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot dot line</source>
        <translation>linia kreska kropka kropka </translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Number notation: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>scientific notation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>engineering notation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>logarithmic X Axis Grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>logarithmical X Axis Grid</source>
        <translation type="vanished">logarytmiczna skala osi X</translation>
    </message>
    <message>
        <source>logarithmical</source>
        <translation type="vanished">logarytmicznie</translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+11"/>
        <source>Grid</source>
        <translation>Siatka</translation>
    </message>
    <message>
        <location line="-11"/>
        <location line="+11"/>
        <source>logarithmic</source>
        <translation type="unfinished">logarytmicznie</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>hide invisible lines</source>
        <translation>ukryj niewidoczne linie</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Rotation around x-Axis:</source>
        <translation>Obrót względem osi x:</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Rotation around y-Axis:</source>
        <translation>Obrót względem osi y:</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Rotation around z-Axis:</source>
        <translation>Obrót względem osi z:</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>2D-projection:</source>
        <translation>2D :</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Properties</source>
        <translation>Właściwości</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>x-Axis</source>
        <translation>Oś x</translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+43"/>
        <location line="+45"/>
        <source>manual</source>
        <translation>ręcznie</translation>
    </message>
    <message>
        <location line="-80"/>
        <location line="+43"/>
        <location line="+45"/>
        <source>start</source>
        <translation>start</translation>
    </message>
    <message>
        <location line="-79"/>
        <location line="+45"/>
        <location line="+44"/>
        <source>step</source>
        <translation>krok</translation>
    </message>
    <message>
        <location line="-80"/>
        <location line="+45"/>
        <location line="+44"/>
        <source>stop</source>
        <translation>stop</translation>
    </message>
    <message>
        <location line="-54"/>
        <location line="+44"/>
        <source>number</source>
        <translation>liczba</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Limits</source>
        <translation>Granice</translation>
    </message>
    <message>
        <location line="+55"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Apply</source>
        <translation>Zastosuj</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
</context>
<context>
    <name>DigiSettingsDialog</name>
    <message>
        <location filename="../qucs/dialogs/digisettingsdialog.cpp" line="+39"/>
        <location line="+94"/>
        <source>Document Settings</source>
        <translation>Ustawienia dokumentu</translation>
    </message>
    <message>
        <location line="-86"/>
        <source>Digital Simulation Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Duration of Simulation:</source>
        <translation>Czas trwania symulacji:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Precompile Module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Library Name:</source>
        <translation>Nazwa biblioteki:</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Libraries:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Ok</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+35"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
</context>
<context>
    <name>DisplayDialog</name>
    <message>
        <source>VHDL</source>
        <translation type="vanished">VHDL</translation>
    </message>
    <message>
        <source>Verilog</source>
        <translation type="vanished">Verilog</translation>
    </message>
    <message>
        <location filename="../qucs/dialogs/displaydialog.cpp" line="+39"/>
        <source>SPICE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Qucs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Close</source>
        <translation>Zamknij</translation>
    </message>
</context>
<context>
    <name>ExportDialog</name>
    <message>
        <location filename="../qucs/dialogs/exportdialog.cpp" line="+35"/>
        <source>Export graphics</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Save to file (Graphics format by extension)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Height in pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Scale factor: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Image format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Export</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="-7"/>
        <source>Width in pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Browse</source>
        <translation>Pokaż</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Colour</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Monochrome</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Grayscale</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Original width to height ratio</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Original size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Export selected only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+39"/>
        <source>Export schematic to raster or vector image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Export Schematic to Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+173"/>
        <source>Export diagram to raster or vector image</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExternSimDialog</name>
    <message>
        <source>Simulate</source>
        <translation type="obsolete">Sumuluj</translation>
    </message>
    <message>
        <location filename="../qucs/extsimkernels/externsimdialog.cpp" line="+50"/>
        <source>Stop</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+233"/>
        <source>Save netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-230"/>
        <source>Exit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Simulation console</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-26"/>
        <source>Simulate with external simulator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+154"/>
        <source>There were simulation errors. Please check log.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>There were simulation warnings. Please check log.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Simulation finished. Now place diagram on schematic to plot the result.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Simulation successful. Now place diagram on schematic to plot the result.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+36"/>
        <source> started...
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Simulation started on: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Failed to start simulator!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Simulator crashed!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Simulator error!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source> error...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FillDialog</name>
    <message>
        <location filename="../qucs/paintings/filldialog.cpp" line="+48"/>
        <source>Line Width: </source>
        <translation>Szerokość linii:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Line Color: </source>
        <translation>Kolor linii:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Line Style: </source>
        <translation>Typ linii:</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>solid line</source>
        <translation>linia ciągła</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash line</source>
        <translation>linia przerywana</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dot line</source>
        <translation>linia kropkowa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot line</source>
        <translation>linia kreska kropka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot dot line</source>
        <translation>linia kreska kropka kropka</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Line Style</source>
        <translation>Rodzaj linii</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>enable filling</source>
        <translation>włącz wypełnianie</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Fill Color: </source>
        <translation>Kolor wypełnienia:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Fill Style: </source>
        <translation>Rodzaj wypełnienia:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>no filling</source>
        <translation>brak</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>solid</source>
        <translation>pełne</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 1 (densest)</source>
        <translation>gęstość 1</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 2</source>
        <translation>wypełnienie 2</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 3</source>
        <translation>wypełnienie 3</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 4</source>
        <translation>wypełnienie 4</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 5</source>
        <translation>wypełnienie 5</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 6</source>
        <translation>wypełnienie 6</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 7 (least dense)</source>
        <translation>gęstość 7 (najmniejsza gęstość)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>horizontal line</source>
        <translation>linia pozioma</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>vertical line</source>
        <translation>linia pionowa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>crossed lines</source>
        <translation>linie krzyżujące się</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>hatched backwards</source>
        <translation>kreskowanie w tył</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>hatched forwards</source>
        <translation>kreskowanie w przód</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>diagonal crossed</source>
        <translation>przekątne</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Filling Style</source>
        <translation>Rodzaj wypełniania</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
</context>
<context>
    <name>FilterDialog</name>
    <message>
        <source>E&amp;xit</source>
        <translation type="vanished">Wy&amp;jście</translation>
    </message>
    <message>
        <source>About Qt...</source>
        <translation type="vanished">O bibliotece QT...</translation>
    </message>
    <message>
        <source>&amp;File</source>
        <translation type="vanished">&amp;Plik</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="vanished">&amp;Pomoc</translation>
    </message>
    <message>
        <source>dB</source>
        <translation type="vanished">dB</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="vanished">Kąt</translation>
    </message>
    <message>
        <source>Ohm</source>
        <translation type="vanished">Ohm</translation>
    </message>
    <message>
        <source>About...</source>
        <translation type="vanished">O...</translation>
    </message>
    <message>
        <source>
Filter synthesis program
</source>
        <translation type="vanished">
Program syntezy filtrów
</translation>
    </message>
    <message>
        <source>Copyright (C) 2009 by</source>
        <translation type="obsolete">Copyright (C) 2005, 2006 by {2009 ?}</translation>
    </message>
    <message>
        <source>About Qt</source>
        <translation type="vanished">O QT</translation>
    </message>
</context>
<context>
    <name>GraphicTextDialog</name>
    <message>
        <location filename="../qucs/paintings/graphictextdialog.cpp" line="+39"/>
        <source>Edit Text Properties</source>
        <translation>Edycja właściwości tekstu</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Use LaTeX style for special characters, e.g. \tau</source>
        <translation>Użuj stylu LaTeXowego dla znaków specjalnych, np. \tau</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Use _{..} and ^{..} for sub- and super-positions.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>&amp;OK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Porzuć</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Text color: </source>
        <translation>Kolor tekstu:</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>  Text size: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>  Rotation angle: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>The text must not be empty!</source>
        <translation>Musisz coś wpisać!</translation>
    </message>
</context>
<context>
    <name>HelpDialog</name>
    <message>
        <location filename="../qucs-filter/helpdialog.cpp" line="+38"/>
        <source>QucsFilter is a filter synthesis program. To create a filter, simply enter all parameters and press the big button at the bottom of the main window. Immediately, the schematic of the filter is calculated and put into the clipboard. Now go to Qucs, open an empty schematic and press CTRL-V (paste from clipboard). The filter schematic can now be inserted and  simulated. Have lots of fun!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+29"/>
        <location filename="../qucs-activefilter/helpdialog.cpp" line="+69"/>
        <source>Close</source>
        <translation>Zamknij</translation>
    </message>
    <message>
        <source>QucsFilter is a filter synthesis program. To create a filter, simply enter all parameters and press the big button at the bottom of the main window. Immediatly, the schematic of the filter is calculated and put into the clipboard. Now go to Qucs, open an empty schematic and press CTRL-V (paste from clipboard). The filter schematic can now be inserted and  simulated. Have lots of fun!</source>
        <translation type="vanished">QucsFilter jest programem służącym do syntezy filtrów. Aby zaprojektować filtr, wprowadź po prostu wszystkie parametry i wciśnij duży przycisk znajdujący na dole głównego okienka. Schemat filtra zostanie wtedy wygenerowany i zapamiętany w schowku. Następnie otwórz pusty plik schematu w programie Qucs i wciśnij CTRL-V (wklej ze schowka). Schemat filtra zostanie w ten sposób wstawiony i   może być zasymulowany. Miłej zabawy!
 </translation>
    </message>
    <message>
        <location filename="../qucs-transcalc/helpdialog.cpp" line="+32"/>
        <source>Help</source>
        <translation>Pomoc</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>QucsTranscalc is an analysis and synthesis tool for calculating the electrical and physical properties of different kinds of RF and microwave transmission lines.</source>
        <translation>QucsTranscalc jest programem służącym do analizy i syntezy elektrycznych i fizycznych właściwości różnych typów linii transmisyjnych.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>For each type of transmission line, using dialog boxes, you can enter values for the various parameters, and either calculate its electrical properties, or use the given electrical requirements to synthesize physical parameters of the required transmission line.</source>
        <translation>Dla każdego z rodzajów linii transmisyjnych można wprowadzić wartości ich parametrów fizycznych i obliczyć ich parametry fizyczne bądź wprowadzić wartości ich parametrów elektrycznych i obliczyć fizyczne.</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Dismiss</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location filename="../qucs-activefilter/helpdialog.cpp" line="-31"/>
        <source>QucsActiveFilter is a active filter synthesis program. Butterworth, Chebyshev, Inverse Chebyshev, Cauer, Bessel and User defined transfer function are supported.To create a filter, simply enter all parameters and press the big button at the bottom of the main window. Immediately, the schematic of the filter is calculated and put into the clipboard. Now go to Qucs, open an empty schematic and press CTRL-V (paste from clipboard). The filter schematic can now be inserted and  simulated. Have lots of fun!</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ID_Dialog</name>
    <message>
        <location filename="../qucs/paintings/id_dialog.cpp" line="+39"/>
        <source>Edit Subcircuit Properties</source>
        <translation>Edycja właściwości podukładu</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Prefix:</source>
        <translation>Prefiks:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Parameters</source>
        <translation>Parametry</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>display</source>
        <translation>wyświetlaj</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Name</source>
        <translation>Nazwa</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Default</source>
        <translation>Domyślnie</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Description</source>
        <translation>Opis</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Type</source>
        <translation>Typ</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+106"/>
        <location line="+37"/>
        <location line="+49"/>
        <location line="+47"/>
        <source>yes</source>
        <translation>tak</translation>
    </message>
    <message>
        <location line="-239"/>
        <location line="+143"/>
        <location line="+96"/>
        <source>no</source>
        <translation>nie</translation>
    </message>
    <message>
        <location line="-221"/>
        <source>display in schematic</source>
        <translation>wyświetlaj na schemacie</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Name:</source>
        <translation>Nazwa:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Default Value:</source>
        <translation>Wartość domyślna:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Description:</source>
        <translation>Opis:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Type:</source>
        <translation>Typ:</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Add</source>
        <translation>Dodaj</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Remove</source>
        <translation>Usuń</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Apply</source>
        <translation>Zastosuj</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+54"/>
        <location line="+8"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="-7"/>
        <source>Parameter must not be named &quot;File&quot;!</source>
        <translation>Nie możesz nazwać parametru &quot;File&quot;!</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Parameter &quot;%1&quot; already in list!</source>
        <translation>Parametr &quot;%1&quot; jest już użyty!</translation>
    </message>
</context>
<context>
    <name>ImportDialog</name>
    <message>
        <location filename="../qucs/dialogs/importdialog.cpp" line="+37"/>
        <source>Convert Data File...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>File specification</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Input File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+21"/>
        <source>Browse</source>
        <translation>Pokaż</translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Output File:</source>
        <translation>Plik wyjściowy:</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Output Data:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-28"/>
        <location line="+19"/>
        <source>Qucs dataset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-15"/>
        <location line="+16"/>
        <source>Touchstone</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-21"/>
        <location line="+22"/>
        <source>CSV</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-26"/>
        <source>Input Format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>SPICE netlist</source>
        <translation type="unfinished">netlista w formacie SPICE</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>VCD dataset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Citi</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>ZVR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>MDL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Output Format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+99"/>
        <source>Qucs library</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-98"/>
        <source>Qucs netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Matlab</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Library Name:</source>
        <translation type="unfinished">Nazwa biblioteki:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Messages</source>
        <translation>Komunikaty</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Convert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Abort</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Close</source>
        <translation>Zamknij</translation>
    </message>
    <message>
        <location line="+23"/>
        <location line="+28"/>
        <source>All known</source>
        <translation>Wsyzstkie znane typy</translation>
    </message>
    <message>
        <location line="-26"/>
        <location line="+28"/>
        <source>Touchstone files</source>
        <translation>Plik formatu Touchstone</translation>
    </message>
    <message>
        <location line="-27"/>
        <location line="+28"/>
        <source>CSV files</source>
        <translation>Pliki CSV</translation>
    </message>
    <message>
        <location line="-27"/>
        <source>CITI files</source>
        <translation>Plik w formacie CITI</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>ZVR ASCII files</source>
        <translation>Pliki formatu ZVR ASCII</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>IC-CAP model files</source>
        <translation>Model IC-CAP</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>VCD files</source>
        <translation>Plik w formacie VCD</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+24"/>
        <source>Qucs dataset files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-23"/>
        <location line="+24"/>
        <source>SPICE files</source>
        <translation>Plik SPICE</translation>
    </message>
    <message>
        <location line="-23"/>
        <location line="+26"/>
        <source>Any file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+261"/>
        <source>Error</source>
        <translation type="unfinished">Błąd</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Cannot open file: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-299"/>
        <location line="+28"/>
        <source>Enter a Data File Name</source>
        <translation>Podaj nazwę pliku</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Qucsator netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Info</source>
        <translation>Informacja</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Output file already exists!</source>
        <translation>Plik wyjściowy już istnieje!</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Overwrite it?</source>
        <translation>Nadpisać?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="vanished">&amp;Tak</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="vanished">&amp;Nie</translation>
    </message>
    <message>
        <source>ERROR: Unknown file format! Please check file name extension!</source>
        <translation type="vanished">BŁĄ|D: Nieznany format pliku. Sprawdź rozszerzenie pliku!</translation>
    </message>
    <message>
        <location line="+82"/>
        <source>Running command line:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>ERROR: Cannot start converter!</source>
        <translation>BŁĄD: Nie można uruchomić konwertera!</translation>
    </message>
    <message>
        <location line="+54"/>
        <source>Successfully converted file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Converter ended with errors!</source>
        <translation>Importowanie pliku zakończone błędem!</translation>
    </message>
</context>
<context>
    <name>LabelDialog</name>
    <message>
        <location filename="../qucs/dialogs/labeldialog.cpp" line="+33"/>
        <source>Insert Nodename</source>
        <translation>Podaj nazwę węzła</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Enter the label:</source>
        <translation>Podaj nazwę:</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Initial node voltage:</source>
        <translation>Początkowa wartość napięcia w węźle:</translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+35"/>
        <source>Less...</source>
        <translation>Mniej...</translation>
    </message>
    <message>
        <location line="-33"/>
        <source>Ok</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+29"/>
        <source>More...</source>
        <translation>Więcej...</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>SPICE checker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Node name &quot;%1&quot; is Nutmeg reserved keyword!
Please select another node name!
Node name will not be changed.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LibraryDialog</name>
    <message>
        <location filename="../qucs/dialogs/librarydialog.cpp" line="+58"/>
        <source>Create Library</source>
        <translation>Stwórz bibliotekę</translation>
    </message>
    <message>
        <location line="+27"/>
        <location line="+99"/>
        <source>Library Name:</source>
        <translation>Nazwa biblioteki:</translation>
    </message>
    <message>
        <location line="-92"/>
        <source>Choose subcircuits:</source>
        <translation>Wybierz podukład:</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Add subcircuit description</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Select All</source>
        <translation>Zaznacz wszystko</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Deselect All</source>
        <translation>Odznacz wszystko</translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+47"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="-44"/>
        <location line="+39"/>
        <source>Next &gt;&gt;</source>
        <translation>Następny &gt;&gt;</translation>
    </message>
    <message>
        <location line="-23"/>
        <source>Enter description for:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Description:</source>
        <translation>Opis:</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Previous</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <location line="+194"/>
        <source>Create</source>
        <translation>Stwórz</translation>
    </message>
    <message>
        <location line="-173"/>
        <source>Message:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Close</source>
        <translation>Zamknij</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>No projects!</source>
        <translation>Nie wybrano projektów!</translation>
    </message>
    <message>
        <location line="+18"/>
        <location line="+16"/>
        <location line="+22"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="-38"/>
        <source>Please insert a library name!</source>
        <translation>Proszę podać nazwę biblioteki!</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Please choose at least one subcircuit!</source>
        <translation>Proszę wybrać przynajmniej jeden podukład!</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Warning</source>
        <translation>Ostrzeżenie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cannot create user library directory !</source>
        <translation>Nie można stworzyć katalogu z biblioteką użytkownika!</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>A library with this name already exists! Rewrite?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A system library with this name already exists!</source>
        <translation type="vanished">Bibliotek systemowa o tej samej nazwie już istnieje!</translation>
    </message>
    <message>
        <source>A library with this name already exists!</source>
        <translation type="vanished">Bibliotek o tej samej nazwie już istnieje!</translation>
    </message>
    <message>
        <location line="+88"/>
        <source>Next...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+50"/>
        <source>Saving library...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Error: Cannot create library!</source>
        <translation>Błąd: Nie można utworzyć biblioteki!</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Loading subcircuit &quot;%1&quot;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Error: Cannot load subcircuit &quot;%1&quot;.</source>
        <translation>Błąd: Nie można otworzyć podukładu  &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Creating Qucs netlist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+32"/>
        <source>Error: Cannot create netlist for &quot;%1&quot;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Creating SPICE netlist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Creating Verilog netlist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Creating VHDL netlist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+50"/>
        <source>Error creating library.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Successfully created library.</source>
        <translation>Tworzenie biblioteki zakończone pomyślnie.</translation>
    </message>
    <message>
        <source>Manage User Libraries</source>
        <translation type="vanished">Zarządzaj bibliotekami uzytkownika</translation>
    </message>
    <message>
        <source>Choose library:</source>
        <translation type="vanished">Zamknij bibliotekę:</translation>
    </message>
    <message>
        <source>New Name:</source>
        <translation type="vanished">Nowa nazwa:</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation type="vanished">Usuń</translation>
    </message>
    <message>
        <source>Rename</source>
        <translation type="vanished">Zmień nazwę</translation>
    </message>
    <message>
        <source>Please insert a new library name!</source>
        <translation type="vanished">Proszę podać nową nazwę biblioteki!</translation>
    </message>
    <message>
        <source>Please choose a library!</source>
        <translation type="vanished">Proszę wybrać bibliotekę!</translation>
    </message>
    <message>
        <source>Cannot rename library subdirectory!</source>
        <translation type="vanished">Nie można zmienić nazwy podkatalogu biblioteki!</translation>
    </message>
    <message>
        <source>Cannot open library!</source>
        <translation type="vanished">Nie można otworzyć biblioteki!</translation>
    </message>
    <message>
        <source>No permission to modify library!</source>
        <translation type="vanished">Brak uprawnień do zmiany biblioteki!</translation>
    </message>
    <message>
        <source>Writing new library not successful!</source>
        <translation type="vanished">Zapisanie nowej biblioteki nie powiodło się!</translation>
    </message>
    <message>
        <source>Cannot delete old library.</source>
        <translation type="vanished">Nie można usunąć biblioteki.</translation>
    </message>
    <message>
        <source>Library file is corrupt!</source>
        <translation type="vanished">Plik biblioteki jest uszkodzony!</translation>
    </message>
    <message>
        <source>No permission to delete library &quot;%1&quot;.</source>
        <translation type="vanished">Brak uprawnień do usunięcia biblioteki &quot;%1&quot;.</translation>
    </message>
    <message>
        <source>No permission to delete library subdirectory &quot;%1&quot;.</source>
        <translation type="vanished">Nie ma praw do usunięcia podkatalogu biblioteki &quot;%1&quot;.</translation>
    </message>
</context>
<context>
    <name>LoadDialog</name>
    <message>
        <location filename="../qucs/dialogs/loaddialog.cpp" line="+46"/>
        <source>Load Verilog-A symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Choose Verilog-A symbol files:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Select All</source>
        <translation>Zaznacz wszystko</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Deselect All</source>
        <translation>Odznacz wszystko</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Ok</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Change Icon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>auto-load selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Load the selected symbols when opening the project.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+83"/>
        <source>Info</source>
        <translation>Informacja</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Icon not found:
 %1.png</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+61"/>
        <source>Open File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Icon image (*.png)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>File not found: %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MarkerDialog</name>
    <message>
        <location filename="../qucs/diagrams/markerdialog.cpp" line="+33"/>
        <source>Edit Marker Properties</source>
        <translation>Edytuj właściwości znacznika</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Precision: </source>
        <translation>Precyzja:</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>real/imaginary</source>
        <translation>część rzeczywista/urojona</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>magnitude/angle (degree)</source>
        <translation>amplituda/faza (w stopniach)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>magnitude/angle (radian)</source>
        <translation>amplituda/faza (w radianach)</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Number Notation: </source>
        <translation>Notacja numeryczna:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>X-axis position:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Square</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Triangle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Marker Indicator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Z0: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>transparent</source>
        <translation>przezroczysty</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
</context>
<context>
    <name>MatchDialog</name>
    <message>
        <location filename="../qucs/dialogs/matchdialog.cpp" line="+52"/>
        <source>Create Matching Circuit</source>
        <translation>Stwórz układ dopasowujący</translation>
    </message>
    <message>
        <source>calculate two-port matching</source>
        <translation type="vanished">oblicz dwuwrotowy układ dopasowujący</translation>
    </message>
    <message>
        <location line="+185"/>
        <source>Reference Impedance</source>
        <translation>Impedancja odniesienia</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Port 1</source>
        <translation>Port 1</translation>
    </message>
    <message>
        <source>ohms</source>
        <translation type="vanished">ohmów</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Port 2</source>
        <translation>Port 2</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>S Parameter</source>
        <translation>Parametry S</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Input format</source>
        <translation>Format wejściowy</translation>
    </message>
    <message>
        <source>real/imag</source>
        <translation type="vanished">część rzeczywista/urojona </translation>
    </message>
    <message>
        <location line="-201"/>
        <source>Implementation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Microstrip Substrate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Relative Permitivity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Substrate height</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Metal thickness</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Minimum width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Maximum width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>tanD</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Resistivity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Method</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>L-section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Single stub</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Double stub</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Multistage </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Open stub</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Short circuit stub</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Number of sections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Weighting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Binomial</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Chebyshev</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Maximum ripple</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Use balanced stubs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Calculate two-port matching</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Add S-Parameter simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Synthesize microstrip lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+53"/>
        <source>Real/Imag</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>mag/deg</source>
        <translation>moduł/faza</translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+198"/>
        <source>S11</source>
        <translation>S11</translation>
    </message>
    <message>
        <location line="-197"/>
        <location line="+198"/>
        <source>S21</source>
        <translation>S21</translation>
    </message>
    <message>
        <location line="-159"/>
        <source>S12</source>
        <translation>S12</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>S22</source>
        <translation>S22</translation>
    </message>
    <message>
        <location line="+57"/>
        <source>Frequency:</source>
        <translation>Częstotliwość:</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Create</source>
        <translation>Stwórz</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+84"/>
        <source>Reflexion Coefficient</source>
        <translation>Współczynnik odbicia</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Impedance (Ohms)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+267"/>
        <source>The device is not unconditionally stable:

K = %1
|%2| = %3

It is not possible to synthesize a matching network.

Consider adding resistive losses and/or feedback to reach unconditional stability (K &gt; 1 and |%2| &lt; 1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+549"/>
        <source>It is not possible to match this load using the double stub method</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Impedance (ohms)</source>
        <translation type="vanished">Impedancja (w ohmach)</translation>
    </message>
    <message>
        <location line="-550"/>
        <location line="+62"/>
        <location line="+487"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="-486"/>
        <source>Real part of impedance must be greater zero,
but is %1 !</source>
        <translation>Cześć rzeczywista impedancji musi być większa od zera,
a jest %1 !</translation>
    </message>
</context>
<context>
    <name>MessageDock</name>
    <message>
        <location filename="../qucs/messagedock.cpp" line="+51"/>
        <source>admsXml</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Compiler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>admsXml Dock</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MyWidget</name>
    <message>
        <source>E&amp;xit</source>
        <translation type="vanished">Wy&amp;jście</translation>
    </message>
    <message>
        <source>&amp;File</source>
        <translation type="vanished">&amp;Plik</translation>
    </message>
    <message>
        <source>Help...</source>
        <translation type="vanished">Pomoc...</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="vanished">&amp;Pomoc</translation>
    </message>
    <message>
        <source>About...</source>
        <translation type="vanished">O...</translation>
    </message>
    <message>
        <source>About Qt</source>
        <translation type="vanished">O QT</translation>
    </message>
</context>
<context>
    <name>NewProjDialog</name>
    <message>
        <location filename="../qucs/dialogs/newprojdialog.cpp" line="+31"/>
        <source>Create new project</source>
        <translation>Stwórz nowy projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Project name:</source>
        <translation>Nazwa projektu:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>open new project</source>
        <translation>otwórz nowy projekt</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Create</source>
        <translation>Stwórz</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
</context>
<context>
    <name>Ngspice</name>
    <message>
        <location filename="../qucs/extsimkernels/ngspice.cpp" line="+601"/>
        <source>Problem with SaveNetlist</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OctaveWindow</name>
    <message>
        <location filename="../qucs/octave_window.cpp" line="+122"/>
        <source>ERROR: Failed to execute &quot;%1&quot;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OptimizeDialog</name>
    <message>
        <location filename="../qucs/components/optimizedialog.cpp" line="+56"/>
        <source>Edit Optimization Properties</source>
        <translation>Podaj parametry do optymalizacji</translation>
    </message>
    <message>
        <location line="+23"/>
        <location line="+120"/>
        <location line="+91"/>
        <source>Name:</source>
        <translation>Nazwa:</translation>
    </message>
    <message>
        <location line="-209"/>
        <source>Simulation:</source>
        <translation>Symulacja:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>General</source>
        <translation>Ogólne</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Method:</source>
        <translation>Metoda:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Maximum number of iterations:</source>
        <translation>Maksymalna liczba iteracji:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Output refresh cycle:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Number of parents:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Constant F:</source>
        <translation>Stała F:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Crossing over factor:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Pseudo random number seed:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Minimum cost variance:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Cost objectives:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Cost constraints:</source>
        <translation>Ograniczenie kosztów:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Algorithm</source>
        <translation>Algorytm</translation>
    </message>
    <message>
        <location line="+12"/>
        <location line="+104"/>
        <source>Name</source>
        <translation>Nazwa</translation>
    </message>
    <message>
        <location line="-104"/>
        <location line="+18"/>
        <source>active</source>
        <translation>aktywne</translation>
    </message>
    <message>
        <location line="-18"/>
        <source>initial</source>
        <translation>początkowe</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>min</source>
        <translation>min</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>max</source>
        <translation>maks</translation>
    </message>
    <message>
        <location line="+0"/>
        <location line="+104"/>
        <source>Type</source>
        <translation>Typ</translation>
    </message>
    <message>
        <location line="-61"/>
        <source>initial:</source>
        <translation>ppoczątkowe:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>min:</source>
        <translation>min:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>max:</source>
        <translation>maks:</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+184"/>
        <location line="+362"/>
        <source>linear double</source>
        <translation>podwójnie liniowa</translation>
    </message>
    <message>
        <location line="-545"/>
        <location line="+185"/>
        <location line="+362"/>
        <source>logarithmic double</source>
        <translation>podwójnie logarytmiczna</translation>
    </message>
    <message>
        <location line="-546"/>
        <location line="+186"/>
        <location line="+362"/>
        <source>linear integer</source>
        <translation>liniowa całkowita</translation>
    </message>
    <message>
        <location line="-547"/>
        <location line="+201"/>
        <source>logarithmic integer</source>
        <translation>logarytmiczna całkowita</translation>
    </message>
    <message>
        <location line="-200"/>
        <location line="+186"/>
        <location line="+362"/>
        <source>E3 series</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-547"/>
        <location line="+187"/>
        <location line="+362"/>
        <source>E6 series</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-548"/>
        <location line="+188"/>
        <location line="+362"/>
        <source>E12 series</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-549"/>
        <location line="+189"/>
        <location line="+362"/>
        <source>E24 series</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-550"/>
        <location line="+190"/>
        <location line="+362"/>
        <source>E48 series</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-551"/>
        <location line="+191"/>
        <location line="+362"/>
        <source>E96 series</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-552"/>
        <location line="+192"/>
        <location line="+362"/>
        <source>E192 series</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-550"/>
        <location line="+69"/>
        <source>Add</source>
        <translation>Dodaj</translation>
    </message>
    <message>
        <location line="-67"/>
        <location line="+69"/>
        <source>Delete</source>
        <translation>Usuń</translation>
    </message>
    <message>
        <location line="-64"/>
        <source>Type:</source>
        <translation>Typ:</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Copy current values to equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Variables</source>
        <translation>Zmienne</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Value</source>
        <translation>Wartość</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Value:</source>
        <translation>Wartość:</translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+147"/>
        <location line="+373"/>
        <source>minimize</source>
        <translation>minimalizuj</translation>
    </message>
    <message>
        <location line="-519"/>
        <location line="+148"/>
        <location line="+373"/>
        <source>maximize</source>
        <translation>maksymalizuj</translation>
    </message>
    <message>
        <location line="-520"/>
        <location line="+149"/>
        <location line="+373"/>
        <source>less</source>
        <translation>mniej niż</translation>
    </message>
    <message>
        <location line="-521"/>
        <location line="+150"/>
        <location line="+373"/>
        <source>greater</source>
        <translation>więcej niż</translation>
    </message>
    <message>
        <location line="-522"/>
        <location line="+151"/>
        <location line="+373"/>
        <source>equal</source>
        <translation>równe</translation>
    </message>
    <message>
        <location line="-523"/>
        <location line="+152"/>
        <source>monitor</source>
        <translation>monitor</translation>
    </message>
    <message>
        <location line="-135"/>
        <source>Goals</source>
        <translation>Cele</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Apply</source>
        <translation>Zastosuj</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+59"/>
        <location line="+105"/>
        <location line="+34"/>
        <location line="+37"/>
        <location line="+199"/>
        <source>yes</source>
        <translation>tak</translation>
    </message>
    <message>
        <location line="-375"/>
        <location line="+139"/>
        <location line="+37"/>
        <source>no</source>
        <translation>nie</translation>
    </message>
    <message>
        <location line="-57"/>
        <location line="+8"/>
        <location line="+125"/>
        <location line="+8"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="-140"/>
        <location line="+133"/>
        <source>Every text field must be non-empty!</source>
        <translation>Musisz wypełnić wsyzstkie pola!</translation>
    </message>
    <message>
        <location line="-125"/>
        <source>Variable &quot;%1&quot; aleardy in list!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+133"/>
        <source>Goal &quot;%1&quot; already in list!</source>
        <translation>Cel &quot;%1&quot; już istnieje!</translation>
    </message>
    <message>
        <location line="+263"/>
        <source>Set precision</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Precision:</source>
        <translation>Precyzja:</translation>
    </message>
</context>
<context>
    <name>OptionsDialog</name>
    <message>
        <location filename="../qucs-transcalc/optionsdialog.cpp" line="+36"/>
        <source>Options</source>
        <translation>Opcje</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Units</source>
        <translation>Jednostki</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Frequency</source>
        <translation>Częstotliwość</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Length</source>
        <translation>Długość</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Resistance</source>
        <translation>Rezystancja</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Angle</source>
        <translation>Kąt</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Save as Default</source>
        <translation>Zapisz jako domyślne</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Dismiss</source>
        <translation>Porzuć</translation>
    </message>
</context>
<context>
    <name>PackageDialog</name>
    <message>
        <source>Create Project Package</source>
        <translation type="vanished">Utwórz paczkę projektów</translation>
    </message>
    <message>
        <source>Package:</source>
        <translation type="vanished">Paczka:</translation>
    </message>
    <message>
        <source>Browse</source>
        <translation type="vanished">Pokaż</translation>
    </message>
    <message>
        <source>include user libraries</source>
        <translation type="vanished">dołącz biblioteki użytkownika</translation>
    </message>
    <message>
        <source>Choose projects:</source>
        <translation type="vanished">Wybierz projekty:</translation>
    </message>
    <message>
        <source>Create</source>
        <translation type="vanished">Stwórz</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="vanished">Porzuć</translation>
    </message>
    <message>
        <source>No projects!</source>
        <translation type="vanished">Nie wybrano projektów!</translation>
    </message>
    <message>
        <source>Extract Project Package</source>
        <translation type="vanished">Rozpakuj paczkę projektów</translation>
    </message>
    <message>
        <source>Close</source>
        <translation type="vanished">Zamknij</translation>
    </message>
    <message>
        <source>Qucs Packages</source>
        <translation type="vanished">Paczki</translation>
    </message>
    <message>
        <source>Any File</source>
        <translation type="vanished">Dowolny Plik</translation>
    </message>
    <message>
        <source>Enter a Package File Name</source>
        <translation type="vanished">Podaj nazwę paczki</translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="vanished">Błąd</translation>
    </message>
    <message>
        <source>Cannot open &quot;%1&quot;!</source>
        <translation type="vanished">Nie można otworzyć &quot;%1&quot;!</translation>
    </message>
    <message>
        <source>Please insert a package name!</source>
        <translation type="vanished">Podaj nazwę paczki!</translation>
    </message>
    <message>
        <source>Please choose at least one project!</source>
        <translation type="vanished">Wybierz co najmniej jeden projekt!</translation>
    </message>
    <message>
        <source>Info</source>
        <translation type="vanished">Informacja</translation>
    </message>
    <message>
        <source>Output file already exists!</source>
        <translation type="vanished">Plik wyjściowy już istnieje!</translation>
    </message>
    <message>
        <source>Overwrite it?</source>
        <translation type="vanished">Nadpisać?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="vanished">&amp;Tak</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="vanished">&amp;Nie</translation>
    </message>
    <message>
        <source>Cannot create package!</source>
        <translation type="vanished">Nie można utworzyć paczki!</translation>
    </message>
    <message>
        <source>Successfully created Qucs package!</source>
        <translation type="vanished">Paczka utworzona!</translation>
    </message>
    <message>
        <source>ERROR: Cannot open package!</source>
        <translation type="vanished">BŁĄD: Nie można otworzyć paczki!</translation>
    </message>
    <message>
        <source>ERROR: File contains wrong header!</source>
        <translation type="vanished">BŁĄD: Zły nagłówek pliku!</translation>
    </message>
    <message>
        <source>ERROR: Wrong version number!</source>
        <translation type="vanished">BŁĄD: Nieodpowiednia wersja!</translation>
    </message>
    <message>
        <source>ERROR: Checksum mismatch!</source>
        <translation type="vanished">BŁĄD: Zła suma kontrolna!</translation>
    </message>
    <message>
        <source>Leave directory &quot;%1&quot;</source>
        <translation type="vanished">Opuszczam katalog &quot;%1&quot;</translation>
    </message>
    <message>
        <source>ERROR: Package is corrupt!</source>
        <translation type="vanished">BŁĄD: Paczka uszkodzona!</translation>
    </message>
    <message>
        <source>Successfully extracted package!</source>
        <translation type="vanished">Paczka rozpakowana!</translation>
    </message>
    <message>
        <source>ERROR: Project directory &quot;%1&quot; already exists!</source>
        <translation type="vanished">BŁĄD: Katalog projektowy &quot;%1&quot; już istnieje!</translation>
    </message>
    <message>
        <source>ERROR: Cannot create directory &quot;%1&quot;!</source>
        <translation type="vanished">BŁĄD: Nie mogę utworzyć katalogu &quot;%1&quot;!</translation>
    </message>
    <message>
        <source>Create and enter directory &quot;%1&quot;</source>
        <translation type="vanished">Tworzę katolog &quot;%1&quot; i wchodzę do niego</translation>
    </message>
    <message>
        <source>ERROR: Cannot create file &quot;%1&quot;!</source>
        <translation type="vanished">BŁĄD: Nie mogę utworzyć pliku &quot;%1&quot;!</translation>
    </message>
    <message>
        <source>Create file &quot;%1&quot;</source>
        <translation type="vanished">Tworzenie pliku &quot;%1&quot;</translation>
    </message>
    <message>
        <source>ERROR: User library &quot;%1&quot; already exists!</source>
        <translation type="vanished">BŁĄD: Biblioteka &quot;%1&quot; już istnieje!</translation>
    </message>
    <message>
        <source>ERROR: Cannot create library &quot;%1&quot;!</source>
        <translation type="vanished">BŁĄD: Nie mogę utworzyć biblioteki &quot;%1&quot;!</translation>
    </message>
    <message>
        <source>Create library &quot;%1&quot;</source>
        <translation type="vanished">Tworzenie biblioteki &quot;%1&quot;</translation>
    </message>
</context>
<context>
    <name>ProjectView</name>
    <message>
        <location filename="../qucs/projectView.cpp" line="+77"/>
        <source>Content of %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Note</source>
        <translation>Informacja</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Datasets</source>
        <translation>Zbiory wyników</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Data Displays</source>
        <translation>Prezentacje wyników</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Verilog</source>
        <translation>Verilog</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Verilog-A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>VHDL</source>
        <translation>VHDL</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Octave</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Schematics</source>
        <translation>Schematy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>SPICE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Others</source>
        <translation>Inne</translation>
    </message>
    <message>
        <location line="+50"/>
        <source>-port</source>
        <translation>-wrota</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="../qucs/components/ac_sim.cpp" line="+27"/>
        <location line="+31"/>
        <source>ac simulation</source>
        <translation>Symulacja ac</translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_sens_ac.cpp" line="+24"/>
        <location line="+31"/>
        <source>AC sensitivity simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-22"/>
        <location filename="../qucs/spicecomponents/sp_sens.cpp" line="+33"/>
        <source>Output variable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/sp_noise.cpp" line="+35"/>
        <location filename="../qucs/spicecomponents/sp_disto.cpp" line="+34"/>
        <location filename="../qucs/components/tr_sim.cpp" line="+33"/>
        <location filename="../qucs/components/sp_sim.cpp" line="+34"/>
        <location filename="../qucs/components/param_sweep.cpp" line="+36"/>
        <location filename="../qucs/components/ac_sim.cpp" line="-23"/>
        <source>sweep type</source>
        <translation>rodzaj przemiatania</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/sp_noise.cpp" line="+2"/>
        <location filename="../qucs/spicecomponents/sp_disto.cpp" line="+2"/>
        <location filename="../qucs/components/sp_sim.cpp" line="+2"/>
        <location filename="../qucs/components/ac_sim.cpp" line="+2"/>
        <source>start frequency in Hertz</source>
        <translation>częstotliwość początkowa w Hertz&apos;ach</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/sp_noise.cpp" line="+2"/>
        <location filename="../qucs/spicecomponents/sp_disto.cpp" line="+2"/>
        <location filename="../qucs/components/sp_sim.cpp" line="+2"/>
        <location filename="../qucs/components/ac_sim.cpp" line="+2"/>
        <source>stop frequency in Hertz</source>
        <translation>częstotliwość końcowa w Hertz&apos;ach</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/sp_noise.cpp" line="+2"/>
        <location filename="../qucs/spicecomponents/sp_disto.cpp" line="+2"/>
        <location filename="../qucs/components/sp_sim.cpp" line="+2"/>
        <location filename="../qucs/components/param_sweep.cpp" line="+8"/>
        <location filename="../qucs/components/ac_sim.cpp" line="+2"/>
        <source>number of simulation steps</source>
        <translation>liczba kroków symulacji</translation>
    </message>
    <message>
        <location filename="../qucs/components/ac_sim.cpp" line="+2"/>
        <source>calculate noise voltages</source>
        <translation>oblicz napięcia szumowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/am_modulator.cpp" line="+24"/>
        <source>ac voltage source with amplitude modulator</source>
        <translation>źródło napięcia AC z modulacją amplitudy</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>AM</source>
        <translation>AM</translation>
    </message>
    <message>
        <location filename="../qucs/components/volt_ac.cpp" line="+53"/>
        <location filename="../qucs/components/pm_modulator.cpp" line="+58"/>
        <location filename="../qucs/components/am_modulator.cpp" line="+15"/>
        <source>peak voltage in Volts</source>
        <translation>napięcie szczytowe w Voltach</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/source_ac.cpp" line="+69"/>
        <location filename="../qucs/components/pm_modulator.cpp" line="+2"/>
        <location filename="../qucs/components/hb_sim.cpp" line="+35"/>
        <location filename="../qucs/components/ampere_ac.cpp" line="+53"/>
        <location filename="../qucs/components/am_modulator.cpp" line="+2"/>
        <source>frequency in Hertz</source>
        <translation>częstotliwość w Hertz&apos;ach</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/pm_modulator.cpp" line="+2"/>
        <location filename="../qucs/components/ampere_ac.cpp" line="+2"/>
        <location filename="../qucs/components/am_modulator.cpp" line="+2"/>
        <source>initial phase in degrees</source>
        <translation>faza początkowa w stopniach</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>offset voltage (SPICE only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>delay time (SPICE only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/am_modulator.cpp" line="+2"/>
        <source>modulation level</source>
        <translation>wskaźnik modulacji</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>AM modulated Source</source>
        <translation>źródło modulowane AM</translation>
    </message>
    <message>
        <location filename="../qucs/components/ampere_ac.cpp" line="-30"/>
        <source>ideal ac current source</source>
        <translation>idealne źródło prądowe ac</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>peak current in Ampere</source>
        <translation>prąd szczytowy w Amperach</translation>
    </message>
    <message>
        <location filename="../qucs/components/volt_ac.cpp" line="-4"/>
        <location filename="../qucs/components/ampere_ac.cpp" line="+6"/>
        <source>damping factor (transient simulation only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/ampere_ac.cpp" line="+16"/>
        <source>ac Current Source</source>
        <translation>Źródło prądowe ac</translation>
    </message>
    <message>
        <location filename="../qucs/components/ampere_dc.cpp" line="+25"/>
        <source>ideal dc current source</source>
        <translation>idealne źródło prądowe dc</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>current in Ampere</source>
        <translation>prąd w Amperach</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>dc Current Source</source>
        <translation>Źródło prądowe dc</translation>
    </message>
    <message>
        <location filename="../qucs/components/ampere_noise.cpp" line="+25"/>
        <source>noise current source</source>
        <translation>źródło prądów szumowych</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>current power spectral density in A^2/Hz</source>
        <translation>gęstość widmowa prądu w A^2/Hz</translation>
    </message>
    <message>
        <location filename="../qucs/components/volt_noise.cpp" line="+51"/>
        <location filename="../qucs/components/noise_vv.cpp" line="+71"/>
        <location filename="../qucs/components/noise_iv.cpp" line="+77"/>
        <location filename="../qucs/components/noise_ii.cpp" line="+83"/>
        <location filename="../qucs/components/ampere_noise.cpp" line="+2"/>
        <source>frequency exponent</source>
        <translation>wykładnik częstotliwości</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/noise_vv.cpp" line="+2"/>
        <location filename="../qucs/components/noise_iv.cpp" line="+2"/>
        <location filename="../qucs/components/noise_ii.cpp" line="+2"/>
        <location filename="../qucs/components/ampere_noise.cpp" line="+2"/>
        <source>frequency coefficient</source>
        <translation>współczynnik częstotliwości</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/noise_vv.cpp" line="+2"/>
        <location filename="../qucs/components/noise_iv.cpp" line="+2"/>
        <location filename="../qucs/components/noise_ii.cpp" line="+2"/>
        <location filename="../qucs/components/ampere_noise.cpp" line="+2"/>
        <source>additive frequency term</source>
        <translation>dodatkowy składnik cęstotliwościowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/ampere_noise.cpp" line="+16"/>
        <source>Noise Current Source</source>
        <translation>szumowe źródło prądowe </translation>
    </message>
    <message>
        <location filename="../qucs/components/amplifier.cpp" line="+24"/>
        <source>ideal amplifier</source>
        <translation>idealny wzmacniacz</translation>
    </message>
    <message>
        <location filename="../qucs/components/vfile.cpp" line="+64"/>
        <location filename="../qucs/components/opamp.cpp" line="+54"/>
        <location filename="../qucs/components/amplifier.cpp" line="+22"/>
        <source>voltage gain</source>
        <translation>wzmocnienie napięciowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/isolator.cpp" line="+51"/>
        <location filename="../qucs/components/amplifier.cpp" line="+2"/>
        <source>reference impedance of input port</source>
        <translation>impedancja odniesienia portu wejściowego</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/amplifier.cpp" line="+2"/>
        <source>reference impedance of output port</source>
        <translation>impedancja odniesienia portu wyjściowego</translation>
    </message>
    <message>
        <location filename="../qucs/components/amplifier.cpp" line="+2"/>
        <source>noise figure</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Amplifier</source>
        <translation>Wzmacniacz</translation>
    </message>
    <message>
        <location filename="../qucs/components/andor4x2.cpp" line="+25"/>
        <source>4x2 andor verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/mux8to1.cpp" line="+28"/>
        <location filename="../qucs/components/mux4to1.cpp" line="+28"/>
        <location filename="../qucs/components/mux2to1.cpp" line="+28"/>
        <location filename="../qucs/components/ha1b.cpp" line="+28"/>
        <location filename="../qucs/components/fa2b.cpp" line="+28"/>
        <location filename="../qucs/components/fa1b.cpp" line="+28"/>
        <location filename="../qucs/components/dmux4to16.cpp" line="+28"/>
        <location filename="../qucs/components/dmux3to8.cpp" line="+29"/>
        <location filename="../qucs/components/dmux2to4.cpp" line="+28"/>
        <location filename="../qucs/components/comp_4bit.cpp" line="+28"/>
        <location filename="../qucs/components/comp_2bit.cpp" line="+28"/>
        <location filename="../qucs/components/comp_1bit.cpp" line="+28"/>
        <location filename="../qucs/components/andor4x4.cpp" line="+28"/>
        <location filename="../qucs/components/andor4x3.cpp" line="+28"/>
        <location filename="../qucs/components/andor4x2.cpp" line="+3"/>
        <source>transfer function high scaling factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/mux4to1.cpp" line="+2"/>
        <location filename="../qucs/components/mux2to1.cpp" line="+2"/>
        <location filename="../qucs/components/hpribin4bit.cpp" line="+30"/>
        <location filename="../qucs/components/ha1b.cpp" line="+2"/>
        <location filename="../qucs/components/greytobinary4bit.cpp" line="+30"/>
        <location filename="../qucs/components/fa2b.cpp" line="+2"/>
        <location filename="../qucs/components/fa1b.cpp" line="+2"/>
        <location filename="../qucs/components/dmux4to16.cpp" line="+2"/>
        <location filename="../qucs/components/dmux3to8.cpp" line="+2"/>
        <location filename="../qucs/components/dmux2to4.cpp" line="+2"/>
        <location filename="../qucs/components/comp_4bit.cpp" line="+2"/>
        <location filename="../qucs/components/comp_2bit.cpp" line="+2"/>
        <location filename="../qucs/components/comp_1bit.cpp" line="+2"/>
        <location filename="../qucs/components/binarytogrey4bit.cpp" line="+30"/>
        <location filename="../qucs/components/andor4x4.cpp" line="+2"/>
        <location filename="../qucs/components/andor4x3.cpp" line="+2"/>
        <location filename="../qucs/components/andor4x2.cpp" line="+2"/>
        <source>output delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/tff_SR.cpp" line="+34"/>
        <location filename="../qucs/components/phototransistor.cpp" line="+54"/>
        <location line="+3"/>
        <location filename="../qucs/components/photodiode.cpp" line="+50"/>
        <location filename="../qucs/components/nigbt.cpp" line="+30"/>
        <location filename="../qucs/components/mux8to1.cpp" line="+1"/>
        <location filename="../qucs/components/mux4to1.cpp" line="+1"/>
        <location filename="../qucs/components/mux2to1.cpp" line="+1"/>
        <location filename="../qucs/components/jkff_SR.cpp" line="+34"/>
        <location filename="../qucs/components/hpribin4bit.cpp" line="+1"/>
        <location filename="../qucs/components/hic2_full.cpp" line="+58"/>
        <location line="+62"/>
        <location line="+66"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+19"/>
        <location filename="../qucs/components/ha1b.cpp" line="+1"/>
        <location filename="../qucs/components/greytobinary4bit.cpp" line="+1"/>
        <location filename="../qucs/components/gatedDlatch.cpp" line="+33"/>
        <location filename="../qucs/components/fa2b.cpp" line="+1"/>
        <location filename="../qucs/components/fa1b.cpp" line="+1"/>
        <location filename="../qucs/components/dmux4to16.cpp" line="+1"/>
        <location filename="../qucs/components/dmux3to8.cpp" line="+1"/>
        <location filename="../qucs/components/dmux2to4.cpp" line="+1"/>
        <location filename="../qucs/components/dff_SR.cpp" line="+34"/>
        <location filename="../qucs/components/comp_4bit.cpp" line="+1"/>
        <location filename="../qucs/components/comp_2bit.cpp" line="+1"/>
        <location filename="../qucs/components/comp_1bit.cpp" line="+1"/>
        <location filename="../qucs/components/binarytogrey4bit.cpp" line="+1"/>
        <location filename="../qucs/components/andor4x4.cpp" line="+1"/>
        <location filename="../qucs/components/andor4x3.cpp" line="+1"/>
        <location filename="../qucs/components/andor4x2.cpp" line="+1"/>
        <location filename="../qucs/components/MESFET.cpp" line="+71"/>
        <location filename="../qucs/components/DLS_nto1.cpp" line="+22"/>
        <location filename="../qucs/components/DLS_1ton.cpp" line="+21"/>
        <source>s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/andor4x2.cpp" line="+19"/>
        <source>4x2 AndOr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/andor4x3.cpp" line="-6"/>
        <source>4x3 andor verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4x3 AndOr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/andor4x4.cpp" line="-6"/>
        <source>4x4 andor verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>4x4 AndOr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/attenuator.cpp" line="+24"/>
        <source>attenuator</source>
        <translation>tłumik</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>power attenuation</source>
        <translation>tłumienie mocy</translation>
    </message>
    <message>
        <location filename="../qucs/components/phaseshifter.cpp" line="+51"/>
        <location filename="../qucs/components/hybrid.cpp" line="+60"/>
        <location filename="../qucs/components/gyrator.cpp" line="+61"/>
        <location filename="../qucs/components/coupler.cpp" line="+70"/>
        <location filename="../qucs/components/attenuator.cpp" line="+2"/>
        <source>reference impedance</source>
        <translation>impedancja odniesienia</translation>
    </message>
    <message>
        <location filename="../qucs/components/twistedpair.cpp" line="+75"/>
        <location filename="../qucs/components/tunneldiode.cpp" line="+54"/>
        <location filename="../qucs/components/tr_sim.cpp" line="+25"/>
        <location filename="../qucs/components/tline_4port.cpp" line="+61"/>
        <location filename="../qucs/components/tline.cpp" line="+57"/>
        <location filename="../qucs/components/taperedline.cpp" line="+67"/>
        <location filename="../qucs/components/spiralinductor.cpp" line="+68"/>
        <location filename="../qucs/components/source_ac.cpp" line="+2"/>
        <location filename="../qucs/components/rlcg.cpp" line="+75"/>
        <location filename="../qucs/components/relais.cpp" line="+76"/>
        <location filename="../qucs/components/rectline.cpp" line="+66"/>
        <location filename="../qucs/components/msvia.cpp" line="+51"/>
        <location filename="../qucs/components/msline.cpp" line="+58"/>
        <location filename="../qucs/components/mslange.cpp" line="+64"/>
        <location filename="../qucs/components/mscoupled.cpp" line="+72"/>
        <location filename="../qucs/components/mosfet_sub.cpp" line="+121"/>
        <location filename="../qucs/components/jfet.cpp" line="+64"/>
        <location filename="../qucs/components/isolator.cpp" line="+2"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+46"/>
        <location filename="../qucs/components/diode.cpp" line="+62"/>
        <location filename="../qucs/components/dc_sim.cpp" line="+29"/>
        <location filename="../qucs/components/ctline.cpp" line="+71"/>
        <location filename="../qucs/components/coaxialline.cpp" line="+61"/>
        <location filename="../qucs/components/circularloop.cpp" line="+57"/>
        <location filename="../qucs/components/bondwire.cpp" line="+60"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+97"/>
        <location filename="../qucs/components/attenuator.cpp" line="+2"/>
        <source>simulation temperature in degree Celsius</source>
        <translation>temeperatura szmulacji w stopniach Celsjusza</translation>
    </message>
    <message>
        <location filename="../qucs/components/attenuator.cpp" line="+14"/>
        <source>Attenuator</source>
        <translation>Tłumik</translation>
    </message>
    <message>
        <location filename="../qucs/components/biast.cpp" line="+25"/>
        <source>bias t</source>
        <translation>Trójnik zasilający</translation>
    </message>
    <message>
        <location filename="../qucs/components/dcfeed.cpp" line="+51"/>
        <location filename="../qucs/components/biast.cpp" line="+35"/>
        <source>for transient simulation: inductance in Henry</source>
        <translation>dla symulacji czasowej: indukcyjność w Henrach</translation>
    </message>
    <message>
        <location filename="../qucs/components/dcblock.cpp" line="+50"/>
        <location filename="../qucs/components/biast.cpp" line="+2"/>
        <source>for transient simulation: capacitance in Farad</source>
        <translation>dla symulacji czasowej: pojemność w Faradach</translation>
    </message>
    <message>
        <location filename="../qucs/components/biast.cpp" line="+14"/>
        <source>Bias T</source>
        <translation>Trójnik zasilający</translation>
    </message>
    <message>
        <location filename="../qucs/components/binarytogrey4bit.cpp" line="-6"/>
        <source>4bit binary to Gray converter verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_inv.cpp" line="+34"/>
        <location filename="../qucs/components/logical_buf.cpp" line="+34"/>
        <location filename="../qucs/components/hpribin4bit.cpp" line="-3"/>
        <location filename="../qucs/components/greytobinary4bit.cpp" line="-3"/>
        <location filename="../qucs/components/component.cpp" line="+1518"/>
        <location filename="../qucs/components/binarytogrey4bit.cpp" line="+3"/>
        <source>transfer function scaling factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/binarytogrey4bit.cpp" line="+23"/>
        <source>4Bit Bin2Gray</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/bjt.cpp" line="+26"/>
        <source>bipolar junction transistor</source>
        <translation>tranzystor złączowy bipolarny</translation>
    </message>
    <message>
        <location filename="../qucs/components/bjtsub.cpp" line="+54"/>
        <location filename="../qucs/components/bjt.cpp" line="+51"/>
        <source>npn transistor</source>
        <translation>tranzystor npn</translation>
    </message>
    <message>
        <location line="+10"/>
        <location filename="../qucs/components/bjt.cpp" line="+10"/>
        <source>pnp transistor</source>
        <translation>tranzystor pnp</translation>
    </message>
    <message>
        <location filename="../qucs/components/mosfet_sub.cpp" line="-94"/>
        <location filename="../qucs/components/jfet.cpp" line="-36"/>
        <location filename="../qucs/components/bjtsub.cpp" line="-134"/>
        <source>polarity</source>
        <translation>polarność</translation>
    </message>
    <message>
        <location filename="../qucs/components/triac.cpp" line="+59"/>
        <location filename="../qucs/components/thyristor.cpp" line="+55"/>
        <location filename="../qucs/components/diode.cpp" line="-34"/>
        <location filename="../qucs/components/diac.cpp" line="+55"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>saturation current</source>
        <translation>prąd nasycenia</translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="-30"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>forward emission coefficient</source>
        <translation>współczynnik emisji w przód</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>reverse emission coefficient</source>
        <translation>zaporowy współczynnik emisji </translation>
    </message>
    <message>
        <location line="+30"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>high current corner for forward beta</source>
        <translation>współczynnik wielkoprądowy dla beta w przód</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>high current corner for reverse beta</source>
        <translation>współczynnik wielkoprądowy dla beta w tył</translation>
    </message>
    <message>
        <location line="-31"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>forward early voltage</source>
        <translation>napięcie Earlyego w kierunku przewodzenia</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>reverse early voltage</source>
        <translation>zaporowe napięcie Earlyego</translation>
    </message>
    <message>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>base-emitter leakage saturation current</source>
        <translation>base-emitter leakage saturation current</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>base-emitter leakage emission coefficient</source>
        <translation>base-emitter leakage emission coefficient</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>base-collector leakage saturation current</source>
        <translation>base-collector leakage saturation current</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>base-collector leakage emission coefficient</source>
        <translation>base-collector leakage emission coefficient</translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="-14"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>forward beta</source>
        <translation>beta w kierunku przewodzenia</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>reverse beta</source>
        <translation>beta w kierunku zaporowym</translation>
    </message>
    <message>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>minimum base resistance for high currents</source>
        <translation>minimalna rezystancja bazy dla wielkich prądów</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>current for base resistance midpoint</source>
        <translation>prąd średniej reyzstancji bazy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>collector ohmic resistance</source>
        <translation>rezystancja ohmowa kolektora</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>emitter ohmic resistance</source>
        <translation>rezystancja omowa emitera</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias base resistance (may be high-current dependent)</source>
        <translation>rezystancja bazy w warunkach zerowych (zależna od wielkich prądów)</translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="+20"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>base-emitter zero-bias depletion capacitance</source>
        <translation>domieszkowana pojemność baza emiter przy zerowym prądzie</translation>
    </message>
    <message>
        <location line="-3"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>base-emitter junction built-in potential</source>
        <translation>wbudowany potencjał złączowy złącza baza emiter</translation>
    </message>
    <message>
        <location line="-2"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>base-emitter junction exponential factor</source>
        <translation>wykładnik potęgowy złącza baza emiter</translation>
    </message>
    <message>
        <location line="+13"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>base-collector zero-bias depletion capacitance</source>
        <translation>domieszkowana pojemność baza kolektor przy zerowym prądzie</translation>
    </message>
    <message>
        <location line="-3"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>base-collector junction built-in potential</source>
        <translation>wbudowany potencjał złączowy złącza baza kolektor</translation>
    </message>
    <message>
        <location line="-2"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>base-collector junction exponential factor</source>
        <translation>wykładnik potęgowy złącza baza kolektor</translation>
    </message>
    <message>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>fraction of Cjc that goes to internal base pin</source>
        <translation>fraction of Cjc that goes to internal base pin</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias collector-substrate capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>substrate junction built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>substrate junction exponential factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="-3"/>
        <location filename="../qucs/components/diode.cpp" line="+10"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <location filename="../qucs/components/MESFET.cpp" line="-3"/>
        <source>forward-bias depletion capacitance coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="+11"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>ideal forward transit time</source>
        <translation>idealny czas przelotu w przód</translation>
    </message>
    <message>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>coefficient of bias-dependence for Tf</source>
        <translation>coefficient of bias-dependence for Tf</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>voltage dependence of Tf on base-collector voltage</source>
        <translation>voltage dependence of Tf on base-collector voltage</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>high-current effect on Tf</source>
        <translation>high-current effect on Tf</translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="-3"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>ideal reverse transit time</source>
        <translation>idealny czas przelotu w tył</translation>
    </message>
    <message>
        <location line="+21"/>
        <location line="+2"/>
        <location filename="../qucs/components/photodiode.cpp" line="+24"/>
        <location filename="../qucs/components/mosfet_sub.cpp" line="+88"/>
        <location filename="../qucs/components/jfet.cpp" line="+30"/>
        <location filename="../qucs/components/diode.cpp" line="+14"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+4"/>
        <location filename="../qucs/components/MESFET.cpp" line="+78"/>
        <source>flicker noise coefficient</source>
        <translation>współczynnik szumów migotania</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/photodiode.cpp" line="+2"/>
        <location filename="../qucs/components/mosfet_sub.cpp" line="+2"/>
        <location filename="../qucs/components/jfet.cpp" line="+2"/>
        <location filename="../qucs/components/diode.cpp" line="+2"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <location filename="../qucs/components/MESFET.cpp" line="-2"/>
        <source>flicker noise exponent</source>
        <translation>flicker noise exponent</translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="+2"/>
        <location filename="../qucs/components/mosfet_sub.cpp" line="+2"/>
        <location filename="../qucs/components/jfet.cpp" line="+2"/>
        <location filename="../qucs/components/diode.cpp" line="+2"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>flicker noise frequency exponent</source>
        <translation>flicker noise frequency exponent</translation>
    </message>
    <message>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>burst noise coefficient</source>
        <translation>burst noise coefficient</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>burst noise exponent</source>
        <translation>burst noise exponent</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>burst noise corner frequency in Hertz</source>
        <translation>burst noise corner frequency in Hertz</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>excess phase in degrees</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>temperature exponent for forward- and reverse beta</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="-23"/>
        <location filename="../qucs/components/jfet.cpp" line="+4"/>
        <location filename="../qucs/components/diode.cpp" line="+8"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>saturation current temperature exponent</source>
        <translation>współćzynnik temepraturowy prądu nasycenia</translation>
    </message>
    <message>
        <location filename="../qucs/components/diode.cpp" line="+2"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>energy bandgap in eV</source>
        <translation>przerwa energetyczna w eV</translation>
    </message>
    <message>
        <location filename="../qucs/components/jfet.cpp" line="+6"/>
        <location filename="../qucs/components/diode.cpp" line="+14"/>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>temperature at which parameters were extracted</source>
        <translation>temperatura ekstrakcji parametrów modelu</translation>
    </message>
    <message>
        <location filename="../qucs/components/bjtsub.cpp" line="+2"/>
        <source>default area for bipolar transistor</source>
        <translation>domyślny obszar transystora bipolarnego</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>bipolar junction transistor with substrate</source>
        <translation>tranzystor złączowy bipolarny z podłożem</translation>
    </message>
    <message>
        <location filename="../qucs/components/bondwire.cpp" line="-36"/>
        <source>bond wire</source>
        <translation>bond wire</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>length of the wire</source>
        <translation>długość drutu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>diameter of the wire</source>
        <translation>średnica drutu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>height above ground plane</source>
        <translation>wzsokość ponad poziom masy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>specific resistance of the metal</source>
        <translation>rezystancja właściwa metalu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>relative permeability of the metal</source>
        <translation>względna przenikalność metalu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bond wire model</source>
        <translation>model bond wire</translation>
    </message>
    <message>
        <location filename="../qucs/components/msvia.cpp" line="-4"/>
        <location filename="../qucs/components/mstee.cpp" line="+39"/>
        <location filename="../qucs/components/msstep.cpp" line="+52"/>
        <location filename="../qucs/components/msmbend.cpp" line="+51"/>
        <location filename="../qucs/components/mscross.cpp" line="+31"/>
        <location filename="../qucs/components/mscorner.cpp" line="+50"/>
        <location filename="../qucs/components/bondwire.cpp" line="+2"/>
        <source>substrate</source>
        <translation>podłoże</translation>
    </message>
    <message>
        <location filename="../qucs/components/bondwire.cpp" line="+12"/>
        <source>Bond Wire</source>
        <translation>Bond Wire</translation>
    </message>
    <message>
        <location filename="../qucs/components/triac.cpp" line="+8"/>
        <location filename="../qucs/components/thyristor.cpp" line="+8"/>
        <location filename="../qucs/components/potentiometer.cpp" line="+49"/>
        <location filename="../qucs/components/phototransistor.cpp" line="+15"/>
        <location filename="../qucs/components/photodiode.cpp" line="+25"/>
        <location filename="../qucs/components/nigbt.cpp" line="+41"/>
        <location filename="../qucs/components/log_amp.cpp" line="+66"/>
        <location filename="../qucs/components/hic2_full.cpp" line="+86"/>
        <location filename="../qucs/components/diac.cpp" line="+6"/>
        <location filename="../qucs/components/MESFET.cpp" line="+9"/>
        <source>simulation temperature</source>
        <translation>temperatura symulacji</translation>
    </message>
    <message>
        <location filename="../qucs/components/capacitor.cpp" line="+25"/>
        <source>capacitor</source>
        <translation>kondensator</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>capacitance in Farad</source>
        <translation>pojemność w Faradach</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>initial voltage for transient simulation</source>
        <translation>napięcie początkowe dla symulacji czasowej</translation>
    </message>
    <message>
        <location filename="../qucs/components/resistor.cpp" line="+39"/>
        <location filename="../qucs/components/logical_inv.cpp" line="+4"/>
        <location filename="../qucs/components/logical_buf.cpp" line="+4"/>
        <location filename="../qucs/components/diode.cpp" line="+4"/>
        <location filename="../qucs/components/component.cpp" line="+4"/>
        <location filename="../qucs/components/capacitor.cpp" line="+2"/>
        <source>schematic symbol</source>
        <translation>symbol  schematu</translation>
    </message>
    <message>
        <location filename="../qucs/components/capacitor.cpp" line="+17"/>
        <source>Capacitor</source>
        <translation>Kondensator</translation>
    </message>
    <message>
        <location filename="../qucs/components/cccs.cpp" line="+25"/>
        <source>current controlled current source</source>
        <translation>źródło prądowe sterowane prądem</translation>
    </message>
    <message>
        <location filename="../qucs/components/vcvs.cpp" line="+67"/>
        <location filename="../qucs/components/ccvs.cpp" line="+62"/>
        <location filename="../qucs/components/cccs.cpp" line="+37"/>
        <source>forward transfer factor</source>
        <translation>współczynnik transmisji w przód</translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="../qucs/components/vccs.cpp" line="+65"/>
        <location filename="../qucs/components/ccvs.cpp" line="+1"/>
        <location filename="../qucs/components/cccs.cpp" line="+1"/>
        <source>delay time (Qucsator only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/vfile.cpp" line="+1"/>
        <location filename="../qucs/components/rs_flipflop.cpp" line="+26"/>
        <location filename="../qucs/components/logical_inv.cpp" line="-6"/>
        <location filename="../qucs/components/logical_buf.cpp" line="-6"/>
        <location filename="../qucs/components/jk_flipflop.cpp" line="+26"/>
        <location filename="../qucs/components/ifile.cpp" line="+62"/>
        <location filename="../qucs/components/d_flipflop.cpp" line="+27"/>
        <location filename="../qucs/components/component.cpp" line="-6"/>
        <source>delay time</source>
        <translation>czas opóźnienia</translation>
    </message>
    <message>
        <location filename="../qucs/components/cccs.cpp" line="+14"/>
        <source>Current Controlled Current Source</source>
        <translation>Źródło prądowe sterowane prądem</translation>
    </message>
    <message>
        <location filename="../qucs/components/ccvs.cpp" line="-39"/>
        <source>current controlled voltage source</source>
        <translation>źródło napięciowe sterowane prądem</translation>
    </message>
    <message>
        <location line="+53"/>
        <source>Current Controlled Voltage Source</source>
        <translation>Źródło napięciowe sterowane prądem</translation>
    </message>
    <message>
        <location filename="../qucs/components/circulator.cpp" line="+23"/>
        <source>circulator</source>
        <translation>cyrkulator</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>reference impedance of port 1</source>
        <translation>impedancja odniesienia portu 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>reference impedance of port 2</source>
        <translation>impedancja odniesienia portu 2</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>reference impedance of port 3</source>
        <translation>impedancja odniesienia portu 3</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Circulator</source>
        <translation>Cyrkulator</translation>
    </message>
    <message>
        <location filename="../qucs/components/coaxialline.cpp" line="-37"/>
        <source>coaxial transmission line</source>
        <translation>koncentryczna linia transmisyjna</translation>
    </message>
    <message>
        <location filename="../qucs/components/rectline.cpp" line="-8"/>
        <location filename="../qucs/components/coaxialline.cpp" line="+23"/>
        <source>relative permittivity of dielectric</source>
        <translation>przenikalność elektryczna dielektryka</translation>
    </message>
    <message>
        <location filename="../qucs/components/twistedpair.cpp" line="-4"/>
        <location filename="../qucs/components/rectline.cpp" line="+6"/>
        <location filename="../qucs/components/coaxialline.cpp" line="+2"/>
        <source>specific resistance of conductor</source>
        <translation>rezystancja właściwa przewodnika</translation>
    </message>
    <message>
        <location line="-2"/>
        <location filename="../qucs/components/rectline.cpp" line="-4"/>
        <location filename="../qucs/components/coaxialline.cpp" line="+2"/>
        <source>relative permeability of conductor</source>
        <translation>wyględna przenikalność przewodnika</translation>
    </message>
    <message>
        <location filename="../qucs/components/coaxialline.cpp" line="+2"/>
        <source>inner diameter of shield</source>
        <translation>wewnętryna średnica płaszcza</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>diameter of inner conductor</source>
        <translation>średnica wewnętrznego przewodnika</translation>
    </message>
    <message>
        <location filename="../qucs/components/rectline.cpp" line="-4"/>
        <location filename="../qucs/components/coaxialline.cpp" line="+2"/>
        <source>mechanical length of the line</source>
        <translation>fizyczna długość linii</translation>
    </message>
    <message>
        <location filename="../qucs/components/twistedpair.cpp" line="+4"/>
        <location filename="../qucs/components/substrate.cpp" line="+68"/>
        <location filename="../qucs/components/rectline.cpp" line="+6"/>
        <location filename="../qucs/components/coaxialline.cpp" line="+2"/>
        <source>loss tangent</source>
        <translation>tanges kąta stratności</translation>
    </message>
    <message>
        <location filename="../qucs/components/coaxialline.cpp" line="+16"/>
        <source>Coaxial Line</source>
        <translation>Linia koncentryczna</translation>
    </message>
    <message>
        <location filename="../qucs/components/comp_1bit.cpp" line="-6"/>
        <source>1bit comparator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>1Bit Comparator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/comp_2bit.cpp" line="-6"/>
        <source>2bit comparator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>2Bit Comparator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/comp_4bit.cpp" line="-6"/>
        <source>4bit comparator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4Bit Comparator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/component.cpp" line="-4"/>
        <source>number of input ports</source>
        <translation>liczba wejść</translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_inv.cpp" line="-2"/>
        <location filename="../qucs/components/logical_buf.cpp" line="-2"/>
        <location filename="../qucs/components/digi_source.cpp" line="+60"/>
        <location filename="../qucs/components/component.cpp" line="+2"/>
        <source>voltage of high level</source>
        <translation>napięcie stanu wysokiego</translation>
    </message>
    <message>
        <location filename="../qucs/schematic_file.cpp" line="+127"/>
        <location line="+18"/>
        <location line="+21"/>
        <location line="+24"/>
        <location line="+17"/>
        <location line="+72"/>
        <location line="+38"/>
        <location line="+37"/>
        <location line="+83"/>
        <location line="+46"/>
        <location line="+78"/>
        <location line="+208"/>
        <location line="+5"/>
        <location line="+37"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+68"/>
        <location line="+59"/>
        <location line="+18"/>
        <location line="+29"/>
        <location line="+6"/>
        <location line="+8"/>
        <location line="+19"/>
        <location line="+16"/>
        <location line="+6"/>
        <location line="+8"/>
        <location line="+15"/>
        <location line="+26"/>
        <location line="+54"/>
        <location filename="../qucs/qucs_actions.cpp" line="+1386"/>
        <location filename="../qucs/dialogs/matchdialog.cpp" line="+581"/>
        <location line="+34"/>
        <location line="+97"/>
        <location filename="../qucs/components/vacomponent.cpp" line="+334"/>
        <location line="+24"/>
        <location filename="../qucs/components/component.cpp" line="+256"/>
        <location line="+46"/>
        <location filename="../qucs-powercombining/qucspowercombiningtool.cpp" line="+788"/>
        <location filename="../qucs-filter/quarterwave_filter.cpp" line="+46"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location filename="../qucs/components/component.cpp" line="-45"/>
        <source>Format Error:
Wrong line start!</source>
        <translation>Błąd formatu:
Błędny początek linii!</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Format Error:
Unknown component!
%1

Do you want to load schematic anyway?
Unknown components will be replaced 
by dummy subcircuit placeholders.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Format Error:
Wrong &apos;component&apos; line format!</source>
        <translation>Błąd formatu:
Błędny format lini &apos;component&apos;!</translation>
    </message>
    <message>
        <location filename="../qucs/components/coplanar.cpp" line="+24"/>
        <source>coplanar line</source>
        <translation>linia koplanarna</translation>
    </message>
    <message>
        <location filename="../qucs/components/msrstub.cpp" line="+44"/>
        <location filename="../qucs/components/msopen.cpp" line="+45"/>
        <location filename="../qucs/components/msline.cpp" line="-12"/>
        <location filename="../qucs/components/mslange.cpp" line="-13"/>
        <location filename="../qucs/components/msgap.cpp" line="+53"/>
        <location filename="../qucs/components/mscoupled.cpp" line="-13"/>
        <location filename="../qucs/components/cpwstep.cpp" line="+68"/>
        <location filename="../qucs/components/cpwshort.cpp" line="+64"/>
        <location filename="../qucs/components/cpwopen.cpp" line="+65"/>
        <location filename="../qucs/components/cpwgap.cpp" line="+66"/>
        <location filename="../qucs/components/coplanar.cpp" line="+38"/>
        <source>name of substrate definition</source>
        <translation>nazwa podłoża</translation>
    </message>
    <message>
        <location filename="../qucs/components/msopen.cpp" line="+2"/>
        <location filename="../qucs/components/msline.cpp" line="+2"/>
        <location filename="../qucs/components/mslange.cpp" line="+2"/>
        <location filename="../qucs/components/mscoupled.cpp" line="+2"/>
        <location filename="../qucs/components/cpwshort.cpp" line="+2"/>
        <location filename="../qucs/components/cpwopen.cpp" line="+2"/>
        <location filename="../qucs/components/cpwgap.cpp" line="+2"/>
        <location filename="../qucs/components/coplanar.cpp" line="+2"/>
        <source>width of the line</source>
        <translation>szerokość linii</translation>
    </message>
    <message>
        <location filename="../qucs/components/cpwshort.cpp" line="+2"/>
        <location filename="../qucs/components/cpwopen.cpp" line="+2"/>
        <location filename="../qucs/components/cpwgap.cpp" line="+2"/>
        <location filename="../qucs/components/coplanar.cpp" line="+2"/>
        <source>width of a gap</source>
        <translation>szerokość odstępu</translation>
    </message>
    <message>
        <location filename="../qucs/components/msline.cpp" line="+2"/>
        <location filename="../qucs/components/mslange.cpp" line="+2"/>
        <location filename="../qucs/components/mscoupled.cpp" line="+2"/>
        <location filename="../qucs/components/coplanar.cpp" line="+2"/>
        <source>length of the line</source>
        <translation>długość linii</translation>
    </message>
    <message>
        <location filename="../qucs/components/cpwstep.cpp" line="+8"/>
        <location filename="../qucs/components/cpwshort.cpp" line="+2"/>
        <location filename="../qucs/components/cpwopen.cpp" line="+4"/>
        <location filename="../qucs/components/coplanar.cpp" line="+2"/>
        <source>material at the backside of the substrate</source>
        <translation>materiał z drugiej strony podłoża</translation>
    </message>
    <message>
        <location filename="../qucs/components/coplanar.cpp" line="+3"/>
        <source>use approximation instead of precise equation</source>
        <translation>użyj aproksymacji zamiast dokładnych równań</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Coplanar Line</source>
        <translation>Linia koplanarna</translation>
    </message>
    <message>
        <location filename="../qucs/components/coupler.cpp" line="-46"/>
        <source>ideal coupler</source>
        <translation>sprzęgacz idealny</translation>
    </message>
    <message>
        <location line="+42"/>
        <source>coupling factor</source>
        <translation>współczynnik sprzeżenia</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>phase shift of coupling path in degree</source>
        <translation>przesunięcie fazy odczepu w stopniach</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Coupler</source>
        <translation>sprzęgacz</translation>
    </message>
    <message>
        <location filename="../qucs/components/cpwgap.cpp" line="-46"/>
        <source>coplanar gap</source>
        <translation>przerwa koplanarna</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>width of gap between the two lines</source>
        <translation>szerokość przerwy między liniami</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Coplanar Gap</source>
        <translation>przerwa koplanarna</translation>
    </message>
    <message>
        <location filename="../qucs/components/cpwopen.cpp" line="-49"/>
        <source>coplanar open</source>
        <translation>rozwarcie koplanarne</translation>
    </message>
    <message>
        <location line="+47"/>
        <source>width of gap at end of line</source>
        <translation>szerokość przerwy na końcu linii</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Coplanar Open</source>
        <translation>rozwarcie koplanarne</translation>
    </message>
    <message>
        <location filename="../qucs/components/cpwshort.cpp" line="-46"/>
        <source>coplanar short</source>
        <translation>zwarcie koplanarne</translation>
    </message>
    <message>
        <location line="+61"/>
        <source>Coplanar Short</source>
        <translation>zwarcie koplanarne</translation>
    </message>
    <message>
        <location filename="../qucs/components/cpwstep.cpp" line="-52"/>
        <source>coplanar step</source>
        <translation>koplanarna skokowa zmiana impedancji</translation>
    </message>
    <message>
        <location filename="../qucs/components/mstee.cpp" line="+2"/>
        <location filename="../qucs/components/mscross.cpp" line="+2"/>
        <location filename="../qucs/components/cpwstep.cpp" line="+46"/>
        <source>width of line 1</source>
        <translation>szerokość linii 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/mscross.cpp" line="+2"/>
        <location filename="../qucs/components/cpwstep.cpp" line="+2"/>
        <source>width of line 2</source>
        <translation>szerokość linii 2</translation>
    </message>
    <message>
        <location filename="../qucs/components/cpwstep.cpp" line="+2"/>
        <source>distance between ground planes</source>
        <translation>odstęp pomiędzy płaszczyznami masy</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Coplanar Step</source>
        <translation>koplanarna skokowa zmiana impedancji</translation>
    </message>
    <message>
        <location filename="../qucs/components/ctline.cpp" line="-51"/>
        <source>coupled transmission lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+37"/>
        <source>characteristic impedance of even mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>characteristic impedance of odd mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/tline_4port.cpp" line="-4"/>
        <location filename="../qucs/components/tline.cpp" line="-4"/>
        <location filename="../qucs/components/rlcg.cpp" line="-2"/>
        <location filename="../qucs/components/ctline.cpp" line="+2"/>
        <source>electrical length of the line</source>
        <translation>długość elektryczna linii</translation>
    </message>
    <message>
        <location filename="../qucs/components/ctline.cpp" line="+2"/>
        <source>relative dielectric constant of even mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>relative dielectric constant of odd mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>attenuation factor per length of even mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>attenuation factor per length of odd mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Coupled Transmission Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>D flip flop with asynchron reset</source>
        <translation type="vanished">przerzutnik D z asynchronicznym resetem</translation>
    </message>
    <message>
        <location filename="../qucs/components/d_flipflop.cpp" line="-2"/>
        <source>D flip flop with asynchronous reset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+91"/>
        <source>D-FlipFlop</source>
        <translation>Przerzutnik D</translation>
    </message>
    <message>
        <location filename="../qucs/components/dc_sim.cpp" line="-7"/>
        <location line="+41"/>
        <source>dc simulation</source>
        <translation>symulacja dc</translation>
    </message>
    <message>
        <location filename="../qucs/components/tr_sim.cpp" line="-6"/>
        <location filename="../qucs/components/hb_sim.cpp" line="+8"/>
        <location filename="../qucs/components/etr_sim.cpp" line="-6"/>
        <location filename="../qucs/components/dc_sim.cpp" line="-32"/>
        <source>relative tolerance for convergence</source>
        <translation>tolerancja względna dla konwergencji</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/hb_sim.cpp" line="-4"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+2"/>
        <location filename="../qucs/components/dc_sim.cpp" line="+2"/>
        <source>absolute tolerance for currents</source>
        <translation>tolerancja absolutna dla prądów</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/hb_sim.cpp" line="+2"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+2"/>
        <location filename="../qucs/components/dc_sim.cpp" line="+2"/>
        <source>absolute tolerance for voltages</source>
        <translation>tolerancja absolutna dla napięć</translation>
    </message>
    <message>
        <location filename="../qucs/components/dc_sim.cpp" line="+2"/>
        <source>put operating points into dataset</source>
        <translation>wstaw punkt pracy do zbioru wyników</translation>
    </message>
    <message>
        <location filename="../qucs/components/tr_sim.cpp" line="-6"/>
        <location filename="../qucs/components/hb_sim.cpp" line="+4"/>
        <location filename="../qucs/components/etr_sim.cpp" line="-6"/>
        <location filename="../qucs/components/dc_sim.cpp" line="+3"/>
        <source>maximum number of iterations until error</source>
        <translation>maksymalna liczba iteracji</translation>
    </message>
    <message>
        <location filename="../qucs/components/dc_sim.cpp" line="+2"/>
        <source>save subcircuit nodes into dataset</source>
        <translation>zapisz węzły podukładów w zbiorze wyników</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>preferred convergence algorithm</source>
        <translation>preferowany algorytm zbieżności</translation>
    </message>
    <message>
        <location filename="../qucs/components/tr_sim.cpp" line="+16"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+16"/>
        <location filename="../qucs/components/dc_sim.cpp" line="+3"/>
        <source>method for solving the circuit matrix</source>
        <translation>metoda rozwiązania macierzy układu</translation>
    </message>
    <message>
        <location filename="../qucs/components/dcblock.cpp" line="-26"/>
        <source>dc block</source>
        <translation>zapora dc</translation>
    </message>
    <message>
        <location line="+40"/>
        <source>dc Block</source>
        <translation>Zapora dc</translation>
    </message>
    <message>
        <location filename="../qucs/components/dcfeed.cpp" line="-27"/>
        <source>dc feed</source>
        <translation>dławik</translation>
    </message>
    <message>
        <location line="+41"/>
        <source>dc Feed</source>
        <translation>Dławik</translation>
    </message>
    <message>
        <location filename="../qucs/components/dff_SR.cpp" line="-8"/>
        <source>D flip flop with set and reset verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/tff_SR.cpp" line="-5"/>
        <location filename="../qucs/components/jkff_SR.cpp" line="-5"/>
        <location filename="../qucs/components/gatedDlatch.cpp" line="-5"/>
        <location filename="../qucs/components/dff_SR.cpp" line="+3"/>
        <source>cross coupled gate transfer function high scaling factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/jkff_SR.cpp" line="+2"/>
        <location filename="../qucs/components/gatedDlatch.cpp" line="+2"/>
        <location filename="../qucs/components/dff_SR.cpp" line="+2"/>
        <source>cross coupled gate transfer function low scaling factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/jkff_SR.cpp" line="+2"/>
        <location filename="../qucs/components/gatedDlatch.cpp" line="+2"/>
        <location filename="../qucs/components/dff_SR.cpp" line="+2"/>
        <source>cross coupled gate delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/dff_SR.cpp" line="+22"/>
        <source>D-FlipFlop w/ SR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/diac.cpp" line="-37"/>
        <source>diac (bidirectional trigger diode)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/triac.cpp" line="-14"/>
        <location filename="../qucs/components/diac.cpp" line="+25"/>
        <source>(bidirectional) breakover voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/diac.cpp" line="+2"/>
        <source>(bidirectional) breakover current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/triac.cpp" line="+4"/>
        <location filename="../qucs/components/thyristor.cpp" line="-10"/>
        <location filename="../qucs/components/diac.cpp" line="+2"/>
        <source>parasitic capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="../qucs/components/thyristor.cpp" line="+4"/>
        <location filename="../qucs/components/diode.cpp" line="-54"/>
        <location filename="../qucs/components/diac.cpp" line="+4"/>
        <source>emission coefficient</source>
        <translation>współczynnik emisji</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/thyristor.cpp" line="+2"/>
        <location filename="../qucs/components/diac.cpp" line="+2"/>
        <source>intrinsic junction resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/diac.cpp" line="+12"/>
        <source>Diac</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/digi_sim.cpp" line="+23"/>
        <location line="+28"/>
        <source>digital simulation</source>
        <translation>symulacja cyfrowa</translation>
    </message>
    <message>
        <location line="-21"/>
        <source>type of simulation</source>
        <translation>typ symulacji</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>duration of TimeList simulation</source>
        <translation>czas trwania symulacji TimeList</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>netlist format</source>
        <translation>format pliku netlisty</translation>
    </message>
    <message>
        <location filename="../qucs/components/digi_source.cpp" line="-34"/>
        <location line="+51"/>
        <source>digital source</source>
        <translation>źródło cyfrowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/source_ac.cpp" line="-8"/>
        <location filename="../qucs/components/digi_source.cpp" line="-23"/>
        <source>number of the port</source>
        <translation>numer portu</translation>
    </message>
    <message>
        <location filename="../qucs/components/digi_source.cpp" line="+2"/>
        <source>initial output value</source>
        <translation>początkowa wartość wyjściowa</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>list of times for changing output value</source>
        <translation>lista czasów, dla których nastepuje zmiana wartości wyjściowej</translation>
    </message>
    <message>
        <location filename="../qucs/components/diode.cpp" line="-5"/>
        <source>diode</source>
        <translation>dioda</translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="-40"/>
        <location filename="../qucs/components/diode.cpp" line="+7"/>
        <source>zero-bias junction capacitance</source>
        <translation>pojemność złączowa przy zerowym prądzie</translation>
    </message>
    <message>
        <location filename="../qucs/components/tunneldiode.cpp" line="-7"/>
        <location filename="../qucs/components/photodiode.cpp" line="+3"/>
        <location filename="../qucs/components/diode.cpp" line="+2"/>
        <location filename="../qucs/components/MESFET.cpp" line="-72"/>
        <source>grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/photodiode.cpp" line="-6"/>
        <location filename="../qucs/components/diode.cpp" line="+2"/>
        <source>junction potential</source>
        <translation>potencjał złączowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/diode.cpp" line="+4"/>
        <source>linear capacitance</source>
        <translation>pojemność liniowa</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>recombination current parameter</source>
        <translation>współczynnik prądu rekombinacji</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>emission coefficient for Isr</source>
        <translation>współczynnik emisji dla Isr</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>ohmic series resistance</source>
        <translation>reyzstancja szeregowa w Ohmach</translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="+15"/>
        <location filename="../qucs/components/diode.cpp" line="+2"/>
        <source>transit time</source>
        <translation>czas przelotu</translation>
    </message>
    <message>
        <location filename="../qucs/components/diode.cpp" line="+2"/>
        <source>high-injection knee current (0=infinity)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="-21"/>
        <location filename="../qucs/components/diode.cpp" line="+8"/>
        <source>reverse breakdown voltage</source>
        <translation>wsteczne napięcie przebicia</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="../qucs/components/diode.cpp" line="+2"/>
        <source>current at reverse breakdown voltage</source>
        <translation>prąd dla wstecznego napięcie przebicia</translation>
    </message>
    <message>
        <location filename="../qucs/components/diode.cpp" line="+8"/>
        <source>Bv linear temperature coefficient</source>
        <translation>Bv liniowy współczynnik temepraturowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Rs linear temperature coefficient</source>
        <translation>Rs liniowy współczynnik temepraturowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Tt linear temperature coefficient</source>
        <translation>Tt liniowy współczynnik temepraturowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Tt quadratic temperature coefficient</source>
        <translation>Tt kwadratowy współczynnik temepraturowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>M linear temperature coefficient</source>
        <translation>M liniowy współczynnik temepraturowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>M quadratic temperature coefficient</source>
        <translation>M kwadratowy współczynnik temepraturowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/tunneldiode.cpp" line="+7"/>
        <location filename="../qucs/components/diode.cpp" line="+4"/>
        <source>default area for diode</source>
        <translation>domyślny obszar diody</translation>
    </message>
    <message>
        <location filename="../qucs/components/diode.cpp" line="+83"/>
        <source>Diode</source>
        <translation>Dioda</translation>
    </message>
    <message>
        <location filename="../qucs/components/DLS_1ton.cpp" line="-6"/>
        <source>data voltage level shifter (digital to analogue) verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/DLS_nto1.cpp" line="-4"/>
        <location filename="../qucs/components/DLS_1ton.cpp" line="+3"/>
        <source>voltage level</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="../qucs/components/DLS_1ton.cpp" line="+2"/>
        <source>time delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/DLS_1ton.cpp" line="+20"/>
        <source>D2A Level Shifter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/DLS_nto1.cpp" line="-6"/>
        <source>data voltage level shifter (analogue to digital) verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="-61"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+8"/>
        <location filename="../qucs/components/photodiode.cpp" line="-2"/>
        <location line="+6"/>
        <location filename="../qucs/components/nigbt.cpp" line="-8"/>
        <location line="+3"/>
        <location filename="../qucs/components/logic_1.cpp" line="+28"/>
        <location filename="../qucs/components/logic_0.cpp" line="+28"/>
        <location filename="../qucs/components/log_amp.cpp" line="-29"/>
        <location filename="../qucs/components/hic2_full.cpp" line="-173"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+27"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+28"/>
        <location line="+26"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="../qucs/components/MESFET.cpp" line="-58"/>
        <location line="+20"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+12"/>
        <location line="+3"/>
        <location filename="../qucs/components/DLS_nto1.cpp" line="+4"/>
        <source>V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/DLS_nto1.cpp" line="+22"/>
        <source>A2D Level Shifter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/dmux2to4.cpp" line="-6"/>
        <source>2to4 demultiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>2to4 Demux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/dmux3to8.cpp" line="-6"/>
        <source>3to8 demultiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>3to8 Demux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/dmux4to16.cpp" line="-6"/>
        <source>4to16 demultiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4to16 Demux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/ecvs.cpp" line="+22"/>
        <source>externally controlled voltage source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/volt_dc.cpp" line="+48"/>
        <location filename="../qucs/components/ecvs.cpp" line="+45"/>
        <source>voltage in Volts</source>
        <translation>napięcie w Voltach</translation>
    </message>
    <message>
        <location filename="../qucs/components/ecvs.cpp" line="+18"/>
        <source>Externally Controlled Voltage Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/nigbt.cpp" line="-33"/>
        <source>m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/jfet.cpp" line="-40"/>
        <location filename="../qucs/components/MESFET.cpp" line="-39"/>
        <source>transconductance parameter</source>
        <translation>współczynnik transkonduktacji</translation>
    </message>
    <message>
        <location filename="../qucs/components/nigbt.cpp" line="-6"/>
        <source>A/V**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <location filename="../qucs/components/hic2_full.cpp" line="-198"/>
        <location filename="../qucs/components/MESFET.cpp" line="+4"/>
        <location line="+3"/>
        <location line="+3"/>
        <source>1/V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/hic2_full.cpp" line="-63"/>
        <source>HICUM Level 2 v2.22 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>GICCR constant</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>A^2s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Zero-bias hole charge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+59"/>
        <source>Coul</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-57"/>
        <source>High-current correction for 2D and 3D effects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Emitter minority charge weighting factor in HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Collector minority charge weighting factor in HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E depletion charge weighting factor in HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-C depletion charge weighting factor in HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Internal B-E saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-E current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Internal B-E recombination saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-E recombination current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Peripheral B-E saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Peripheral B-E current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Peripheral B-E recombination saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Peripheral B-E recombination current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Non-ideality factor for III-V HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Base current recombination time constant at B-C barrier for high forward injection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-C saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-C current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>External B-C saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>External B-C current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E tunneling saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Exponent factor for tunneling current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Specifies the base node connection for the tunneling current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Avalanche current factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Exponent factor for avalanche current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Relative TC for FAVL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <location line="+160"/>
        <location line="+7"/>
        <location line="+3"/>
        <location line="+30"/>
        <source>1/K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-201"/>
        <source>Relative TC for QAVL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Zero bias internal base resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>External base series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Factor for geometry dependence of emitter current crowding</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Correction factor for modulation by B-E and B-C space charge layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ratio of HF shunt to total internal capacitance (lateral NQS effect)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ration of internal to total minority charge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Emitter series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>External collector series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Substrate transistor transfer saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Forward ideality factor of substrate transfer current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>C-S diode saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Ideality factor of C-S diode current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Transit time for forward operation of substrate transistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Substrate series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Substrate shunt capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-E zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-E built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-E grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ratio of maximum to zero-bias value of internal B-E capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Peripheral B-E zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Peripheral B-E built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Peripheral B-E grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ratio of maximum to zero-bias value of peripheral B-E capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Internal B-C zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-C built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal B-C grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Internal B-C punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>External B-C zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>External B-C built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>External B-C grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>External B-C punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Partitioning factor of parasitic B-C cap</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Partitioning factor of parasitic B-E cap</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>C-S zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>C-S built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>C-S grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>C-S punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Low current forward transit time at VBC=0V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Time constant for base and B-C space charge layer width modulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Time constant for modelling carrier jam at low VCE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Neutral emitter storage time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Exponent factor for current dependence of neutral emitter storage time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Saturation time constant at high current densities</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Smoothing factor for current dependence of base and collector transit time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Partitioning factor for base and collector portion</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Internal collector resistance at low electric field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Voltage separating ohmic and saturation velocity regime</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Internal C-E saturation voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Collector punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Storage time for inverse operation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Total parasitic B-E capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Total parasitic B-C capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Factor for additional delay time of minority charge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Factor for additional delay time of transfer current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Flag for turning on and off of vertical NQS effect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Flicker noise coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Flicker noise exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Flag for determining where to tag the flicker noise source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Scaling factor for collector minority charge in direction of emitter width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Scaling factor for collector minority charge in direction of emitter length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Bandgap voltage extrapolated to 0 K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>First order relative TC of parameter T0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Second order relative TC of parameter T0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature exponent for RCI0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Relative TC of saturation drift velocity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Relative TC of VCES</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Temperature exponent of internal base resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature exponent of external base resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature exponent of external collector resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature exponent of emitter resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature exponent of mobility in substrate transistor transit time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Effective emitter bandgap voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Effective collector bandgap voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Effective substrate bandgap voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Coefficient K1 in T-dependent band-gap equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Coefficient K2 in T-dependent band-gap equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Exponent coefficient in transfer current temperature dependence</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Exponent coefficient in B-E junction current temperature dependence</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Relative TC of forward current gain for V2.1 model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Flag for turning on and off self-heating effect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Thermal resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>K/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Thermal capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>J/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Flag for compatibility with v2.1 model (0=v2.1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature at which parameters are specified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>C</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature change w.r.t. chip temperature for particular transistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>HICUM L2 v2.22</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/potentiometer.cpp" line="-27"/>
        <location line="+19"/>
        <location filename="../qucs/components/phototransistor.cpp" line="+18"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="../qucs/components/photodiode.cpp" line="-12"/>
        <location line="+38"/>
        <location filename="../qucs/components/log_amp.cpp" line="+3"/>
        <location line="+6"/>
        <location filename="../qucs/components/hic2_full.cpp" line="-234"/>
        <location line="+3"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+16"/>
        <location line="+84"/>
        <location filename="../qucs/components/MESFET.cpp" line="+39"/>
        <source>Ohm</source>
        <translation>Ohm</translation>
    </message>
    <message>
        <location filename="../qucs/components/rlcg.cpp" line="-4"/>
        <source>F/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="-47"/>
        <location line="+35"/>
        <location line="+3"/>
        <location filename="../qucs/components/photodiode.cpp" line="-35"/>
        <location line="+6"/>
        <location filename="../qucs/components/log_amp.cpp" line="-20"/>
        <location line="+3"/>
        <location filename="../qucs/components/hic2_full.cpp" line="-182"/>
        <location line="+11"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+39"/>
        <location line="+5"/>
        <location filename="../qucs/components/MESFET.cpp" line="+62"/>
        <source>A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-20"/>
        <location line="+8"/>
        <location filename="../qucs/components/photodiode.cpp" line="+6"/>
        <location filename="../qucs/components/hic2_full.cpp" line="+11"/>
        <location line="+3"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+11"/>
        <location line="+15"/>
        <location line="+47"/>
        <location line="+3"/>
        <location filename="../qucs/components/MESFET.cpp" line="-52"/>
        <location line="+3"/>
        <location line="+3"/>
        <source>F</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="+4"/>
        <source>diode relative area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/potentiometer.cpp" line="+5"/>
        <location filename="../qucs/components/photodiode.cpp" line="+2"/>
        <location filename="../qucs/components/nigbt.cpp" line="+8"/>
        <location filename="../qucs/components/mosfet_sub.cpp" line="+4"/>
        <location filename="../qucs/components/log_amp.cpp" line="+34"/>
        <location filename="../qucs/components/MESFET.cpp" line="+60"/>
        <source>parameter measurement temperature</source>
        <translation>temperatura, przy której zmierzono parametry</translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="../qucs/components/photodiode.cpp" line="+1"/>
        <location filename="../qucs/components/nigbt.cpp" line="+1"/>
        <location line="+3"/>
        <location filename="../qucs/components/log_amp.cpp" line="+1"/>
        <location filename="../qucs/components/MESFET.cpp" line="+1"/>
        <source>Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/eqndefined.cpp" line="+32"/>
        <source>equation defined device</source>
        <translation>element opisany równaniem</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>type of equations</source>
        <translation>typ równań</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>number of branches</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+234"/>
        <source>current equation</source>
        <translation>równanie prądowe</translation>
    </message>
    <message>
        <location line="-232"/>
        <location line="+234"/>
        <source>charge equation</source>
        <translation>równanie ładunkowe</translation>
    </message>
    <message>
        <location line="-216"/>
        <source>Equation Defined Device</source>
        <translation>Element Opisany Równaniem</translation>
    </message>
    <message>
        <location filename="../qucs/components/equation.cpp" line="+29"/>
        <source>equation</source>
        <translation>równanie</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+6"/>
        <source>Equation</source>
        <translation>Równanie</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>put result into dataset</source>
        <translation>wstaw rezultaty do zbioru wyników</translation>
    </message>
    <message>
        <location line="+36"/>
        <source>Qucsator equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/etr_sim.cpp" line="-32"/>
        <source>externally driven transient simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/tr_sim.cpp" line="-25"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+7"/>
        <source>integration method</source>
        <translation>metoda całkowania</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+3"/>
        <source>order of integration method</source>
        <translation>rząd metody całkowania</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+2"/>
        <source>initial step size in seconds</source>
        <translation>krok początkowy w sekundach</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+2"/>
        <source>minimum step size in seconds</source>
        <translation>minimalny krok w sekundach</translation>
    </message>
    <message>
        <location line="+12"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+12"/>
        <source>relative tolerance of local truncation error</source>
        <translation>relatywna tolerancja błedu zaokragleń</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+2"/>
        <source>absolute tolerance of local truncation error</source>
        <translation>absolutna tolerancja błedu zaokragleń</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+2"/>
        <source>overestimation of local truncation error</source>
        <translation>przeszacowanie błedu zaokrąglenia</translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+5"/>
        <source>relax time step raster</source>
        <translation>czas relaksacji</translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_sens_tr_xyce.cpp" line="+45"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+2"/>
        <source>perform an initial DC analysis</source>
        <translation>przeprowadź początkową analizę DC</translation>
    </message>
    <message>
        <location filename="../qucs/components/tr_sim.cpp" line="+4"/>
        <location filename="../qucs/components/etr_sim.cpp" line="+2"/>
        <source>maximum step size in seconds</source>
        <translation>maksymalny krok czasu w sekundach</translation>
    </message>
    <message>
        <location filename="../qucs/components/etr_sim.cpp" line="+14"/>
        <source>External transient simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/fa1b.cpp" line="-6"/>
        <source>1bit full adder verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>1Bit FullAdder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/fa2b.cpp" line="-6"/>
        <source>2bit full adder verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>2Bit FullAdder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/gatedDlatch.cpp" line="-7"/>
        <source>gated D latch verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Gated D-Latch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/greytobinary4bit.cpp" line="-3"/>
        <source>4bit Gray to binary converter verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>4Bit Gray2Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/ground.cpp" line="+24"/>
        <source>ground (reference potential)</source>
        <translation>masa (potencjał odniesienia)</translation>
    </message>
    <message>
        <location line="+32"/>
        <source>Ground</source>
        <translation>Masa</translation>
    </message>
    <message>
        <location filename="../qucs/components/gyrator.cpp" line="-36"/>
        <source>gyrator (impedance inverter)</source>
        <translation>żyrator (odwracacz impedancji)</translation>
    </message>
    <message>
        <location line="+34"/>
        <source>gyrator ratio</source>
        <translation>przekładnia żyratora</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Gyrator</source>
        <translation>Żyrator</translation>
    </message>
    <message>
        <location filename="../qucs/components/ha1b.cpp" line="-6"/>
        <source>1bit half adder verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>1Bit HalfAdder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/hb_sim.cpp" line="-21"/>
        <source>Harmonic balance simulation</source>
        <translation>Symulacja bilansu harmonicznych</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>number of harmonics</source>
        <translation>liczba harmonicznych</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Harmonic balance</source>
        <translation>Bilans harmonicznych</translation>
    </message>
    <message>
        <location filename="../qucs/components/hpribin4bit.cpp" line="-3"/>
        <source>4bit highest priority encoder (binary form) verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4Bit HPRI-Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/hybrid.cpp" line="-40"/>
        <source>hybrid (unsymmetrical 3dB coupler)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/phaseshifter.cpp" line="-2"/>
        <location filename="../qucs/components/hybrid.cpp" line="+38"/>
        <source>phase shift in degree</source>
        <translation>przesuw fazy w stopniach</translation>
    </message>
    <message>
        <location filename="../qucs/components/hybrid.cpp" line="+13"/>
        <source>Hybrid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/iexp.cpp" line="+28"/>
        <source>exponential current source</source>
        <translation>wykładniczne źródło prądowe</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>current before rising edge</source>
        <translation>prąd przed zboczem narastającym</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum current of the pulse</source>
        <translation>maksymalny prąd impulsu</translation>
    </message>
    <message>
        <location filename="../qucs/components/vexp.cpp" line="+60"/>
        <location filename="../qucs/components/iexp.cpp" line="+2"/>
        <source>start time of the exponentially rising edge</source>
        <translation>początek wykładniczego narastania zbocza</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/iexp.cpp" line="+2"/>
        <source>start of exponential decay</source>
        <translation>początek wykładniczego opadania zbocza</translation>
    </message>
    <message>
        <location filename="../qucs/components/iexp.cpp" line="+2"/>
        <source>time constant of the rising edge</source>
        <translation>stała czasowa zbocza narastającego</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>time constant of the falling edge</source>
        <translation>stała czasowa zbocza opadającego</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Exponential Current Pulse</source>
        <translation>Wykładniczy Impuls Prądu</translation>
    </message>
    <message>
        <location filename="../qucs/components/ifile.cpp" line="-36"/>
        <source>file based current source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/vfile.cpp" line="-6"/>
        <location filename="../qucs/components/ifile.cpp" line="+30"/>
        <source>name of the sample file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/sparamfile.cpp" line="+40"/>
        <location filename="../qucs/components/ifile.cpp" line="+2"/>
        <source>interpolation type</source>
        <translation>rodzaj interpolacji</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/ifile.cpp" line="+2"/>
        <source>repeat waveform</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/ifile.cpp" line="+1"/>
        <source>current gain</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>File Based Current Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/inductor.cpp" line="+25"/>
        <source>inductor</source>
        <translation>cewka</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>inductance in Henry</source>
        <translation>indukczjność w Henrach</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>initial current for transient simulation</source>
        <translation>prąd początkowy dla symulacji czasowej</translation>
    </message>
    <message>
        <location line="+52"/>
        <source>Inductor</source>
        <translation>Cewka</translation>
    </message>
    <message>
        <location filename="../qucs/components/iprobe.cpp" line="+24"/>
        <source>current probe</source>
        <translation>miernik prądu</translation>
    </message>
    <message>
        <location line="+51"/>
        <source>Current Probe</source>
        <translation>Miernik prądu</translation>
    </message>
    <message>
        <location filename="../qucs/components/ipulse.cpp" line="+28"/>
        <source>ideal current pulse source</source>
        <translation>idealne prądowe źródło impulsowe</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>current before and after the pulse</source>
        <translation>prąd po i przed impulsem</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>current of the pulse</source>
        <translation>prąd impulsu</translation>
    </message>
    <message>
        <location filename="../qucs/components/vpulse.cpp" line="+61"/>
        <location filename="../qucs/components/ipulse.cpp" line="+2"/>
        <source>start time of the pulse</source>
        <translation>czas początku impulsu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/ipulse.cpp" line="+2"/>
        <source>ending time of the pulse</source>
        <translation>czas końca impulsu</translation>
    </message>
    <message>
        <location filename="../qucs/components/vrect.cpp" line="+62"/>
        <location filename="../qucs/components/vpulse.cpp" line="+2"/>
        <location filename="../qucs/components/irect.cpp" line="+70"/>
        <location filename="../qucs/components/ipulse.cpp" line="+2"/>
        <source>rise time of the leading edge</source>
        <translation>czas narastania pierwszego zbocza</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/vpulse.cpp" line="+2"/>
        <location filename="../qucs/components/irect.cpp" line="+2"/>
        <location filename="../qucs/components/ipulse.cpp" line="+2"/>
        <source>fall time of the trailing edge</source>
        <translation>czas opadania ogona</translation>
    </message>
    <message>
        <location filename="../qucs/components/ipulse.cpp" line="+16"/>
        <source>Current Pulse</source>
        <translation>Impuls Prądu</translation>
    </message>
    <message>
        <location filename="../qucs/components/irect.cpp" line="-42"/>
        <source>ideal rectangle current source</source>
        <translation>idealne prostokątne źródło prądowe</translation>
    </message>
    <message>
        <location line="+34"/>
        <source>current at high pulse</source>
        <translation>prąd w stanie wysokim</translation>
    </message>
    <message>
        <location filename="../qucs/components/vrect.cpp" line="-6"/>
        <location filename="../qucs/components/irect.cpp" line="+2"/>
        <source>duration of high pulses</source>
        <translation>cyas trwania stanu wysokiego</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/irect.cpp" line="+2"/>
        <source>duration of low pulses</source>
        <translation>cyas trwania stanu niskiego</translation>
    </message>
    <message>
        <location line="+6"/>
        <location filename="../qucs/components/irect.cpp" line="+6"/>
        <source>initial delay time</source>
        <translation>początkowe opóźnienie</translation>
    </message>
    <message>
        <location filename="../qucs/components/irect.cpp" line="+47"/>
        <source>Rectangle Current</source>
        <translation>Źródło prądowego przebiegu prostokątnego</translation>
    </message>
    <message>
        <location filename="../qucs/components/isolator.cpp" line="-31"/>
        <source>isolator</source>
        <translation>izolator</translation>
    </message>
    <message>
        <location line="+45"/>
        <source>Isolator</source>
        <translation>Izolator</translation>
    </message>
    <message>
        <location filename="../qucs/components/jfet.cpp" line="-8"/>
        <source>junction field-effect transistor</source>
        <translation>tranyzstor polowy złączowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/nigbt.cpp" line="-10"/>
        <location filename="../qucs/components/jfet.cpp" line="+6"/>
        <source>threshold voltage</source>
        <translation>napięcie progowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/jfet.cpp" line="+4"/>
        <source>channel-length modulation parameter</source>
        <translation>współczynnik modulacji długości kanału</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>parasitic drain resistance</source>
        <translation>pasożytnicza rezystancja drenu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>parasitic source resistance</source>
        <translation>pasożytnicza rezystancja źródła</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-junction saturation current</source>
        <translation>prąd nasycenia złacza bramki</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-junction emission coefficient</source>
        <translation>współczynnik emisji złącza bramki</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-junction recombination current parameter</source>
        <translation>współcyznnik rekombinacji prądowej złącza bramki</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Isr emission coefficient</source>
        <translation>współczynnik emisji lsr</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias gate-source junction capacitance</source>
        <translation>pojemność bramka źródło przy zerowym prądzie</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias gate-drain junction capacitance</source>
        <translation>pojemność bramka dren przy zerowym prądzie</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-junction potential</source>
        <translation>potencjał złącza bramki</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>forward-bias junction capacitance coefficient</source>
        <translation>współczynnik prądu w przód pojemności złączowej</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate P-N grading coefficient</source>
        <translation>współczynnik złącza P-N bramki</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Vt0 temperature coefficient</source>
        <translation>Vt0 współczynnik temepraturowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Beta exponential temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>default area for JFET</source>
        <translation>domyślny obszar transystora JFET</translation>
    </message>
    <message>
        <location line="+68"/>
        <source>n-JFET</source>
        <translation>n-JFET</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>p-JFET</source>
        <translation>p-JFET</translation>
    </message>
    <message>
        <source>JK flip flop with asynchron set and reset</source>
        <translation type="vanished">przerzutnik JK z asynchronicznym resetem i wejściem ustawiania</translation>
    </message>
    <message>
        <location filename="../qucs/components/jk_flipflop.cpp" line="-2"/>
        <source>JK flip flop with asynchronous set and reset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+121"/>
        <source>JK-FlipFlop</source>
        <translation>Przerzutnik JK</translation>
    </message>
    <message>
        <location filename="../qucs/components/jkff_SR.cpp" line="-7"/>
        <source>jk flip flop with set and reset verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+28"/>
        <source>JK-FlipFlop w/ SR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/libcomp.cpp" line="+34"/>
        <source>Component taken from Qucs library</source>
        <translation>Komponent wyięty z biblioteki Qucs</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>name of qucs library file</source>
        <translation>nazwa biblioteki Qucs</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>name of component in library</source>
        <translation>nazwa komponentu w bibliotece</translation>
    </message>
    <message>
        <location filename="../qucs/components/log_amp.cpp" line="-48"/>
        <source>Logarithmic Amplifier verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>scale factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>scale factor error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/potentiometer.cpp" line="-12"/>
        <location line="+3"/>
        <location filename="../qucs/components/photodiode.cpp" line="+19"/>
        <location filename="../qucs/components/log_amp.cpp" line="+1"/>
        <location line="+11"/>
        <source>%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/log_amp.cpp" line="-9"/>
        <source>input I1 bias current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>input reference bias current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>number of decades</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/potentiometer.cpp" line="-4"/>
        <location filename="../qucs/components/log_amp.cpp" line="+2"/>
        <source>conformity error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/log_amp.cpp" line="+3"/>
        <source>output offset error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>amplifier input resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>amplifier 3dB frequency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hz</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>amplifier output resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>conformity error temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+6"/>
        <location filename="../qucs/components/MESFET.cpp" line="-58"/>
        <location line="+3"/>
        <location line="+3"/>
        <source>%/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-4"/>
        <source>offset temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>V/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>scale factor error temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>input I1 bias current temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <source>A/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>input reference bias current temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Logarithmic Amplifier</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <location filename="../qucs/components/MESFET.cpp" line="-43"/>
        <source>I</source>
        <translation>1</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>R</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/logic_0.cpp" line="-4"/>
        <source>logic 0 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>logic 0 voltage level</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Logic 0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/logic_1.cpp" line="-4"/>
        <source>logic 1 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>logic 1 voltage level</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Logic 1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_and.cpp" line="+22"/>
        <source>logical AND</source>
        <translation>bramka AND</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>n-port AND</source>
        <translation>n-wejściowa bramka AND</translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_buf.cpp" line="-4"/>
        <source>logical buffer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+105"/>
        <source>Buffer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_inv.cpp" line="-4"/>
        <source>logical inverter</source>
        <translation>inverter logiczny</translation>
    </message>
    <message>
        <location line="+122"/>
        <source>Inverter</source>
        <translation>inwerter</translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_nand.cpp" line="+22"/>
        <source>logical NAND</source>
        <translation>bramka NAND</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>n-port NAND</source>
        <translation>n-wejściowa bramka NAND</translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_nor.cpp" line="+22"/>
        <source>logical NOR</source>
        <translation>bramka NOR</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>n-port NOR</source>
        <translation>n-wejściowa bramka NOR</translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_or.cpp" line="+22"/>
        <source>logical OR</source>
        <translation>bramka OR</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>n-port OR</source>
        <translation>n-wejściowa bramka OR</translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_xnor.cpp" line="+22"/>
        <source>logical XNOR</source>
        <translation>bramka XNOR</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>n-port XNOR</source>
        <translation>n-wejściowa bramka XNOR</translation>
    </message>
    <message>
        <location filename="../qucs/components/logical_xor.cpp" line="+22"/>
        <source>logical XOR</source>
        <translation>bramka XOR</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>n-port XOR</source>
        <translation>n-wejściowa bramka XOR</translation>
    </message>
    <message>
        <location filename="../qucs/components/MESFET.cpp" line="-40"/>
        <source>MESFET verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>model selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>pinch-off voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>A/(V*V)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>saturation voltage parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>channel length modulation parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>doping profile parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>power law exponent parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>power feedback parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>1/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum junction voltage limit before capacitance limiting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>capacitance saturation transition voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>capacitance threshold transition voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>dc drain pull coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>subthreshold conductance parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>diode saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>diode emission coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>built-in gate potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate-drain junction reverse bias breakdown voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>diode saturation current temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>transit time under gate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>channel resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>area factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+59"/>
        <source>gate reverse breakdown current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="-10"/>
        <location filename="../qucs/components/MESFET.cpp" line="-57"/>
        <source>energy gap</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="../qucs/components/MESFET.cpp" line="+1"/>
        <source>eV</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/MESFET.cpp" line="+4"/>
        <source>zero bias gate-drain junction capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero bias gate-source junction capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero bias drain-source junction capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Beta temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Alpha temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Gamma temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Subthreshold slope gate parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>subthreshold drain pull parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-source current equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-drain current equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-source charge equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-drain charge equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>drain-source charge equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Vto temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/triac.cpp" line="+2"/>
        <location filename="../qucs/components/thyristor.cpp" line="+2"/>
        <location filename="../qucs/components/MESFET.cpp" line="+2"/>
        <source>gate resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/MESFET.cpp" line="+1"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+15"/>
        <location line="+3"/>
        <source>Ohms</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-22"/>
        <source>drain resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>source resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate resistance temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <location line="+3"/>
        <source>1/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-4"/>
        <source>drain resistance temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>source resistance temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>forward bias slope resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>breakdown slope resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>shot noise coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>MESFET</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/mod_amp.cpp" line="+16"/>
        <source>Modular Operational Amplifier verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Gain bandwidth product (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Open-loop differential gain at DC (dB)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Second pole frequency (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Output resistance (Ohm)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Differential input capacitance (F)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Differential input resistance (Ohm)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Input offset current (A)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Input bias current (A)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Input offset voltage (V)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Common-mode rejection ratio at DC (dB)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Common-mode zero corner frequency (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Positive slew rate (V/s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Negative slew rate (V/s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Positive output voltage limit (V)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Negative output voltage limit (V)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Maximum DC output current (A)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Current limit scale factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Modular OpAmp</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/mosfet.cpp" line="+27"/>
        <source>MOS field-effect transistor</source>
        <translation>tranzystor polowy MOS</translation>
    </message>
    <message>
        <location filename="../qucs/components/mosfet_sub.cpp" line="+96"/>
        <location filename="../qucs/components/mosfet.cpp" line="+23"/>
        <source>n-MOSFET</source>
        <translation>n-MOSFET</translation>
    </message>
    <message>
        <location line="+11"/>
        <location filename="../qucs/components/mosfet.cpp" line="+10"/>
        <source>p-MOSFET</source>
        <translation>p-MOSFET</translation>
    </message>
    <message>
        <location line="+17"/>
        <location filename="../qucs/components/mosfet.cpp" line="+16"/>
        <source>depletion MOSFET</source>
        <translation>zubażany MOSFET</translation>
    </message>
    <message>
        <location line="-218"/>
        <source>zero-bias threshold voltage</source>
        <translation>napięcie progowe (zero-bias)</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>transconductance coefficient in A/V^2</source>
        <translation>współczynnik transkonduktacji w A/V^2</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk threshold in sqrt(V)</source>
        <translation>bulk threshold in sqrt(V)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>surface potential</source>
        <translation>potencjał powierzchniowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>channel-length modulation parameter in 1/V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>drain ohmic resistance</source>
        <translation>rezystancja omowa drenu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>source ohmic resistance</source>
        <translation>rezystancja omowa źródła</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate ohmic resistance</source>
        <translation>rezystancja omowa bramki</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction saturation current</source>
        <translation>prąd nasycenia złącza podłożowego</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction emission coefficient</source>
        <translation>współczynnik emisji złącza podłożowego</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>channel width</source>
        <translation>szerokość kanału</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>channel length</source>
        <translation>długość kanału</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>lateral diffusion length</source>
        <translation>lateral diffusion length</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>oxide thickness</source>
        <translation>grubość dielektryka</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-source overlap capacitance per meter of channel width in F/m</source>
        <translation>pojemność zakładu bramka źródło na metr szerokości kanału w F/m</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate-drain overlap capacitance per meter of channel width in F/m</source>
        <translation>pojemność zakładu bramka dren na metr szerokości kanału w F/m</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate-bulk overlap capacitance per meter of channel length in F/m</source>
        <translation>pojemność zakładu bramka podłoże na metr szerokości kanału w F/m</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero-bias bulk-drain junction capacitance</source>
        <translation>pojemność podłoże dren przy zerowym prądzie</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias bulk-source junction capacitance</source>
        <translation>pojemność złącza podłoże źródło przy zerowym prądzie</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction potential</source>
        <translation>potencjał złącza podłoża</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction bottom grading coefficient</source>
        <translation>bulk junction bottom grading coefficient</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction forward-bias depletion capacitance coefficient</source>
        <translation>bulk junction forward-bias depletion capacitance coefficient</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero-bias bulk junction periphery capacitance per meter of junction perimeter in F/m</source>
        <translation>zero-bias bulk junction periphery capacitance per meter of junction perimeter in F/m</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>bulk junction periphery grading coefficient</source>
        <translation>bulk junction periphery grading coefficient</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk transit time</source>
        <translation>czas przelotu przez podłoże</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>substrate bulk doping density in 1/cm^3</source>
        <translation>domieszkowanie podłoża w 1/cm^3</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>surface state density in 1/cm^2</source>
        <translation>surface state density in 1/cm^2</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate material type: 0 = alumina; -1 = same as bulk; 1 = opposite to bulk</source>
        <translation>materiał bramki: 0 = aluminium; -1 = identyczny jak podłoże; 1 = inny niż podłoże</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>surface mobility in cm^2/Vs</source>
        <translation>ruchliwość powierzchniowa w cm^2/Vs</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>drain and source diffusion sheet resistance in Ohms/square</source>
        <translation>dyfuzyjna rezystancja powierzchniowa drenu i źródła w Ohmach na kwadat</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>number of equivalent drain squares</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>number of equivalent source squares</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias bulk junction bottom capacitance per square meter of junction area in F/m^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>bulk junction saturation current per square meter of junction area in A/m^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>drain diffusion area in m^2</source>
        <translation>obszar dyfuzji drenu w m^2</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>source diffusion area in m^2</source>
        <translation>obszar dyfuzji źródła w m^2</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>drain junction perimeter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>source junction perimeter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <location filename="../qucs/components/jfet.cpp" line="-76"/>
        <location filename="../qucs/components/diode.cpp" line="-79"/>
        <location filename="../qucs/components/bjtsub.cpp" line="-7"/>
        <source>Use global SPICE temperature</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>MOS field-effect transistor with substrate</source>
        <translation>MOS tranzystor polowy z podłożem</translation>
    </message>
    <message>
        <location filename="../qucs/components/mscorner.cpp" line="-26"/>
        <source>microstrip corner</source>
        <translation>narożnik mikropaskowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/msmbend.cpp" line="+2"/>
        <location filename="../qucs/components/mscorner.cpp" line="+28"/>
        <source>width of line</source>
        <translation>szerokość linii</translation>
    </message>
    <message>
        <location filename="../qucs/components/mscorner.cpp" line="+14"/>
        <source>Microstrip Corner</source>
        <translation>Narożnik mikropaskowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/mscoupled.cpp" line="-39"/>
        <source>coupled microstrip line</source>
        <translation>linia mikropaskowa sprzężona</translation>
    </message>
    <message>
        <location filename="../qucs/components/mslange.cpp" line="+2"/>
        <location filename="../qucs/components/mscoupled.cpp" line="+41"/>
        <source>spacing between the lines</source>
        <translation>odstęp pomiędzy liniami</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/mscoupled.cpp" line="+2"/>
        <source>microstrip model</source>
        <translation>model mikropaskowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/mstee.cpp" line="+7"/>
        <location filename="../qucs/components/msstep.cpp" line="+9"/>
        <location filename="../qucs/components/msopen.cpp" line="+5"/>
        <location filename="../qucs/components/msline.cpp" line="+5"/>
        <location filename="../qucs/components/mslange.cpp" line="+2"/>
        <location filename="../qucs/components/msgap.cpp" line="+11"/>
        <location filename="../qucs/components/mscross.cpp" line="+9"/>
        <location filename="../qucs/components/mscoupled.cpp" line="+2"/>
        <source>microstrip dispersion model</source>
        <translation>mikropaskowy model dyspersji</translation>
    </message>
    <message>
        <location filename="../qucs/components/mscoupled.cpp" line="+17"/>
        <source>Coupled Microstrip Line</source>
        <translation>Linia mikropaskowa sprzężona</translation>
    </message>
    <message>
        <location filename="../qucs/components/mscross.cpp" line="-20"/>
        <source>microstrip cross</source>
        <translation>mikropaskowe połączenie krzyżowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/mstee.cpp" line="-5"/>
        <location filename="../qucs/components/mscross.cpp" line="+13"/>
        <source>width of line 3</source>
        <translation>szerokość linii 3</translation>
    </message>
    <message>
        <location filename="../qucs/components/mscross.cpp" line="+2"/>
        <source>width of line 4</source>
        <translation>szerokość linii 4</translation>
    </message>
    <message>
        <location filename="../qucs/components/mstee.cpp" line="+2"/>
        <location filename="../qucs/components/msstep.cpp" line="-3"/>
        <location filename="../qucs/components/msopen.cpp" line="-3"/>
        <location filename="../qucs/components/msline.cpp" line="-3"/>
        <location filename="../qucs/components/msgap.cpp" line="-3"/>
        <location filename="../qucs/components/mscross.cpp" line="+2"/>
        <source>quasi-static microstrip model</source>
        <translation>quasi/statyczny model mikropaskowy</translation>
    </message>
    <message>
        <location line="+8"/>
        <location filename="../qucs/components/mscross.cpp" line="+6"/>
        <source>show port numbers in symbol or not</source>
        <translation>pokaż numery portów na symbolu lub nie</translation>
    </message>
    <message>
        <location filename="../qucs/components/mscross.cpp" line="+17"/>
        <source>Microstrip Cross</source>
        <translation>Mikropaskowe połączenie krzyżowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/msgap.cpp" line="-37"/>
        <source>microstrip gap</source>
        <translation>przerwa mikropaskowa</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>width of the line 1</source>
        <translation>szerokość linii 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>width of the line 2</source>
        <translation>szerokość linii 2</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>spacing between the microstrip ends</source>
        <translation>odstęp pomiędzy końcami linii mikropaskowej</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Microstrip Gap</source>
        <translation>Przerwa mikropaskowa</translation>
    </message>
    <message>
        <location filename="../qucs/components/mslange.cpp" line="-37"/>
        <source>microstrip lange coupler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+54"/>
        <source>Microstrip Lange Coupler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/msline.cpp" line="-28"/>
        <source>microstrip line</source>
        <translation>linia mikropaskowa</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>Microstrip Line</source>
        <translation>Linia mikropaskowa</translation>
    </message>
    <message>
        <location filename="../qucs/components/msmbend.cpp" line="-29"/>
        <source>microstrip mitered bend</source>
        <translation>fazowany narożnik mikropaskowy</translation>
    </message>
    <message>
        <location line="+43"/>
        <source>Microstrip Mitered Bend</source>
        <translation>Fazowany narożnik mikropaskowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/msopen.cpp" line="-25"/>
        <source>microstrip open</source>
        <translation>rozwarcie mikropaskowe</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>microstrip open end model</source>
        <translation>model rozwarcia mikropaskowego</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Microstrip Open</source>
        <translation>Rozwarcie mikropaskowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/msrstub.cpp" line="-21"/>
        <source>microstrip radial stub</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+23"/>
        <source>inner radius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>outer radius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>feeding line width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>stub angle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Effective dimension</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Model</source>
        <translation type="unfinished">Model</translation>
    </message>
    <message>
        <location filename="../qucs/components/potentiometer.cpp" line="-9"/>
        <location line="+7"/>
        <location filename="../qucs/components/msrstub.cpp" line="-4"/>
        <source>degrees</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/msrstub.cpp" line="+18"/>
        <source>Microstrip Radial Stub</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/msstep.cpp" line="-34"/>
        <source>microstrip impedance step</source>
        <translation>skok impedancji linii mikropaskowej</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>width 1 of the line</source>
        <translation>1 szerokość linii</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>width 2 of the line</source>
        <translation>2 szerokość linii</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Microstrip Step</source>
        <translation>Mikropaskowe przejście schodkowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/mstee.cpp" line="-30"/>
        <source>microstrip tee</source>
        <translation>trójnik mikropaskowy</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>temperature in degree Celsius</source>
        <translation>temperatura w stopniach Celcsjusza</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Microstrip Tee</source>
        <translation>Trójnik mikropaskowy</translation>
    </message>
    <message>
        <location filename="../qucs/components/msvia.cpp" line="-22"/>
        <source>microstrip via</source>
        <translation>przelotka linii mikropaskowej</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>diameter of round via conductor</source>
        <translation>Średnica</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Microstrip Via</source>
        <translation>Przelotka linii mikropaskowej</translation>
    </message>
    <message>
        <location filename="../qucs/components/mutual.cpp" line="+25"/>
        <source>two mutual inductors</source>
        <translation>dwie indukcyjności wzajemnie sprzężone</translation>
    </message>
    <message>
        <location filename="../qucs/components/mutual2.cpp" line="+86"/>
        <location filename="../qucs/components/mutual.cpp" line="+37"/>
        <source>inductance of coil 1</source>
        <translation>indukcyjnośc cewki 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/mutual.cpp" line="+2"/>
        <source>inductance of coil 2</source>
        <translation>indukcyjnośc cewki 2</translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="../qucs/components/mutual.cpp" line="+2"/>
        <source>coupling factor between coil 1 and 2</source>
        <translation>współczynnik sprzężenie między 1 i 2</translation>
    </message>
    <message>
        <location filename="../qucs/components/mutual.cpp" line="+14"/>
        <source>Mutual Inductors</source>
        <translation>Indukcyjności wzajemnie sprzężone</translation>
    </message>
    <message>
        <location filename="../qucs/components/mutual2.cpp" line="-65"/>
        <source>three mutual inductors</source>
        <translation>trzy indukcyjności wzajemnie sprzężone</translation>
    </message>
    <message>
        <location line="+63"/>
        <source>inductance of coil 3</source>
        <translation>indukcyjnośc cewki 3</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>coupling factor between coil 1 and 3</source>
        <translation>współczynnik sprzężenie między 1 i 3</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>coupling factor between coil 2 and 3</source>
        <translation>współczynnik sprzężenie między 2 i 3</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>3 Mutual Inductors</source>
        <translation>3 Indukcyjności wzajemnie sprzężone</translation>
    </message>
    <message>
        <location filename="../qucs/components/mutualx.cpp" line="+28"/>
        <source>several mutual inductors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>number of mutual inductances</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+133"/>
        <location line="+20"/>
        <source>inductance of coil</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-147"/>
        <location line="+155"/>
        <source>coupling factor between coil %1 and coil %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-145"/>
        <source>N Mutual Inductors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/mux2to1.cpp" line="-6"/>
        <source>2to1 multiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>2to1 Mux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/mux4to1.cpp" line="-6"/>
        <source>4to1 multiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4to1 Mux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/mux8to1.cpp" line="-6"/>
        <source>8to1 multiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>8to1 Mux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/nigbt.cpp" line="-46"/>
        <source>NIGBT verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>gate-drain overlap area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <source>m**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>area of the device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>MOS transconductance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>ambipolar recombination lifetime</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>metallurgical base width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>avalanche uniformity factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>avalanche multiplication exponent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-source capacitance per unit area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <source>F/cm**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>gate-drain oxide capacitance per unit area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>emitter saturation current density</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>A/cm**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>triode region factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>electron mobility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <source>cm**2/Vs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>hole mobility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>base doping</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>1/cm**3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>transverse field factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>gate-drain overlap depletion threshold</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>NIGBT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/noise_vv.cpp" line="-51"/>
        <location filename="../qucs/components/noise_iv.cpp" line="-57"/>
        <location filename="../qucs/components/noise_ii.cpp" line="-63"/>
        <source>correlated current sources</source>
        <translation>skorelowane źródła prądowe</translation>
    </message>
    <message>
        <location filename="../qucs/components/noise_iv.cpp" line="+47"/>
        <location filename="../qucs/components/noise_ii.cpp" line="+53"/>
        <source>current power spectral density of source 1</source>
        <translation>gęstość widmowa prądu źródła 1</translation>
    </message>
    <message>
        <location filename="../qucs/components/noise_ii.cpp" line="+2"/>
        <source>current power spectral density of source 2</source>
        <translation>gęstość widmowa prądu źródła 2</translation>
    </message>
    <message>
        <location filename="../qucs/components/noise_vv.cpp" line="+45"/>
        <location filename="../qucs/components/noise_iv.cpp" line="+4"/>
        <location filename="../qucs/components/noise_ii.cpp" line="+2"/>
        <source>normalized correlation coefficient</source>
        <translation>znormalizowany współczynnik korelacji</translation>
    </message>
    <message>
        <location line="+20"/>
        <location filename="../qucs/components/noise_iv.cpp" line="+20"/>
        <location filename="../qucs/components/noise_ii.cpp" line="+20"/>
        <source>Correlated Noise Sources</source>
        <translation>Skorelowane źródła napięciowe</translation>
    </message>
    <message>
        <location line="-22"/>
        <location filename="../qucs/components/noise_iv.cpp" line="-22"/>
        <source>voltage power spectral density of source 2</source>
        <translation>gęstość widmowa napięcia źródła 2</translation>
    </message>
    <message>
        <location line="-2"/>
        <source>voltage power spectral density of source 1</source>
        <translation>gęstość widmowa napięcia źródła 1</translation>
    </message>
    <message>
        <location filename="../qucs/components/opamp.cpp" line="-28"/>
        <source>operational amplifier</source>
        <translation>wzmacniacz operacyjny</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>absolute value of maximum and minimum output voltage</source>
        <translation>moduł maksymalnej i minimalnej wartości napięcia wyjściowego</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>OpAmp</source>
        <translation>OpAmp</translation>
    </message>
    <message>
        <location filename="../qucs/components/opt_sim.cpp" line="+30"/>
        <source>Optimization</source>
        <translation>Optymalizacja</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>optimization</source>
        <translation>Optymalizacja</translation>
    </message>
    <message>
        <location filename="../qucs/components/pad2bit.cpp" line="+16"/>
        <source>2bit pattern generator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/pad4bit.cpp" line="+19"/>
        <location filename="../qucs/components/pad3bit.cpp" line="+19"/>
        <location filename="../qucs/components/pad2bit.cpp" line="+3"/>
        <source>pad output value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/pad2bit.cpp" line="+20"/>
        <source>2Bit Pattern</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/pad3bit.cpp" line="-3"/>
        <source>3bit pattern generator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+23"/>
        <source>3Bit Pattern</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/pad4bit.cpp" line="-3"/>
        <source>4bit pattern generator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+23"/>
        <source>4Bit Pattern</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/param_sweep.cpp" line="-21"/>
        <location line="+35"/>
        <source>Parameter sweep</source>
        <translation>Przemiatanie parametrów</translation>
    </message>
    <message>
        <location line="-24"/>
        <source>simulation to perform parameter sweep on</source>
        <translation>symulacja do wykonania przemiatania</translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_sens.cpp" line="+2"/>
        <location filename="../qucs/components/param_sweep.cpp" line="+4"/>
        <source>parameter to sweep</source>
        <translation>parametr do przemiatania</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/param_sweep.cpp" line="+2"/>
        <source>start value for sweep</source>
        <translation>wartość początkowa przemiatania</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/param_sweep.cpp" line="+2"/>
        <source>stop value for sweep</source>
        <translation>wartość końcowa przemiatania</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Simulation step</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/phaseshifter.cpp" line="-25"/>
        <source>phase shifter</source>
        <translation>przesuwnik fazy</translation>
    </message>
    <message>
        <location line="+41"/>
        <source>Phase Shifter</source>
        <translation>Przesuwnik fazy</translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="-39"/>
        <source>Photodiode verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>photodiode emission coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>series lead resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>diode dark current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+32"/>
        <source>responsivity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="+30"/>
        <location filename="../qucs/components/photodiode.cpp" line="+1"/>
        <source>A/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/photodiode.cpp" line="+2"/>
        <source>shunt resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>quantum efficiency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>light wavelength</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>nm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>responsivity calculator selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Photodiode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/phototransistor.cpp" line="-65"/>
        <source>Phototransistor verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>dark current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+41"/>
        <source>collector series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>emitter series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>base series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>responsivity at relative selectivity=100%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>relative selectivity polynomial coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Phototransistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/pm_modulator.cpp" line="-38"/>
        <source>ac voltage source with phase modulator</source>
        <translation>źródło napięcia AC z modulacją fazy</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>PM</source>
        <translation>PM</translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/vsffm.cpp" line="+28"/>
        <source>SPICE V(SFFM):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+28"/>
        <source>offset volage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>carrier amplitude</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/isffm.cpp" line="+60"/>
        <source>carrier signal frequency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/isffm.cpp" line="+2"/>
        <location filename="../qucs/components/pm_modulator.cpp" line="+21"/>
        <source>modulation index</source>
        <translation>indeks modulacji</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/isffm.cpp" line="+2"/>
        <source>modulating signal frequency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>V(SFFM)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/pm_modulator.cpp" line="+14"/>
        <source>PM modulated Source</source>
        <translation>źródło modulowane PM</translation>
    </message>
    <message>
        <location filename="../qucs/components/potentiometer.cpp" line="-15"/>
        <source>Potentiometer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>nominal device resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>shaft/wiper arm rotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>resistive law taper coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>device type selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum shaft/wiper rotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>linearity error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>wiper arm contact resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>resistance temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>PPM/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Potentiometer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+34"/>
        <source>B</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/LTL_SPICE.cpp" line="+25"/>
        <source>SPICE T:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+32"/>
        <source>Characteristic impedance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Transmission delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Frequency</source>
        <translation type="unfinished">Częstotliwość</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Normalised length at given frequency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Initial voltage at end 1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Initial current at end 1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Initial voltage at end 2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Initial current at end 2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <location filename="../qucs/components/potentiometer.cpp" line="+1"/>
        <source>T</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/rectline.cpp" line="-39"/>
        <location line="+60"/>
        <source>Rectangular Waveguide</source>
        <translation>Falowód prostokątny</translation>
    </message>
    <message>
        <location line="-31"/>
        <source>widest side</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>shortest side</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>material parameter for temperature model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/relais.cpp" line="-50"/>
        <source>relay</source>
        <translation>przekażnik</translation>
    </message>
    <message>
        <location line="+42"/>
        <source>threshold voltage in Volts</source>
        <translation>napięcie progowe w Voltach</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>hysteresis voltage in Volts</source>
        <translation>napięcie histerezy w Voltach</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resistance of &quot;on&quot; state in Ohms</source>
        <translation>rezystancja stanu włączenia w Ohmach</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resistance of &quot;off&quot; state in Ohms</source>
        <translation>rezystancja stanu wyłączenia w Ohmach</translation>
    </message>
    <message>
        <location line="+54"/>
        <source>Relay</source>
        <translation>przekaźnik</translation>
    </message>
    <message>
        <location filename="../qucs/components/resistor.cpp" line="-15"/>
        <source>resistor</source>
        <translation>opornik</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>ohmic resistance in Ohms</source>
        <translation>reystancja w Ohmach</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>first order temperature coefficient</source>
        <translation>współczynnik temperaturowy pierwszego rzędu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>second order temperature coefficient</source>
        <translation>współczynnik temperaturowy drugiego rzędu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>temperature at which parameters were extracted (Qucsator only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+98"/>
        <source>Resistor</source>
        <translation>Opornik</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Resistor US</source>
        <translation>Opornik US</translation>
    </message>
    <message>
        <location filename="../qucs/components/rfedd.cpp" line="+26"/>
        <source>equation defined RF device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/rfedd2p.cpp" line="+36"/>
        <location filename="../qucs/components/rfedd.cpp" line="+8"/>
        <source>type of parameters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/sparamfile.cpp" line="+7"/>
        <location filename="../qucs/components/rfedd.cpp" line="+2"/>
        <source>number of ports</source>
        <translation>liczba portów</translation>
    </message>
    <message>
        <location line="-5"/>
        <location filename="../qucs/components/rfedd2p.cpp" line="+2"/>
        <location filename="../qucs/components/rfedd.cpp" line="+2"/>
        <source>representation during DC analysis</source>
        <translation>reprezentacja w symulacji DC</translation>
    </message>
    <message>
        <location filename="../qucs/components/rfedd2p.cpp" line="+5"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location filename="../qucs/components/rfedd.cpp" line="+5"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+83"/>
        <location line="+5"/>
        <location line="+9"/>
        <source>parameter equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/rfedd.cpp" line="-79"/>
        <source>Equation Defined RF Device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+92"/>
        <source>RF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/rfedd2p.cpp" line="-21"/>
        <source>equation defined 2-port RF device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+38"/>
        <source>Equation Defined 2-port RF Device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/rlcg.cpp" line="-42"/>
        <source>RLCG transmission line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>RLCG</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>resistive load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Ohm/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>inductive load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>H/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>capacitive load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>conductive load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>S/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>RLCG Transmission Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/rs_flipflop.cpp" line="-2"/>
        <source>RS flip flop</source>
        <translation>przerzutnik RS</translation>
    </message>
    <message>
        <location line="+84"/>
        <source>RS-FlipFlop</source>
        <translation>Przerzutnik RS</translation>
    </message>
    <message>
        <location filename="../qucs/components/source_ac.cpp" line="-37"/>
        <source>ac power source</source>
        <translation>źródło mocy ac</translation>
    </message>
    <message>
        <location line="+39"/>
        <source>port impedance</source>
        <translation>impedancja portu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>(available) ac power in Watts</source>
        <translation>moc dysponowana ac w Wattach</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>enable transient model as sine source [true,false]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Power Source</source>
        <translation>Źródło mocy</translation>
    </message>
    <message>
        <location filename="../qucs/components/sp_sim.cpp" line="-14"/>
        <source>S parameter simulation</source>
        <translation>symulacja parametrów S</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>calculate noise parameters</source>
        <translation>oblicz parametry szumowe</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>input port for noise figure</source>
        <translation>podaj port wejściowy do wspołczynnika szumów</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>output port for noise figure</source>
        <translation>podaj port wyjściowy do wspołczynnika szumów</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>put characteristic values into dataset</source>
        <translation>umieść wartości charakterystyczne w zbiorze wyników</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>save subcircuit characteristic values into dataset</source>
        <translation>zapisz wartości charakterystyczne w zbiorze wyników</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>S-parameter simulation</source>
        <translation>Symulacja parametrów S</translation>
    </message>
    <message>
        <location filename="../qucs/components/sparamfile.cpp" line="-15"/>
        <source>S parameter file</source>
        <translation>plik z parametrami S</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>name of the s parameter file</source>
        <translation>nazwa pliku z parametrami S</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>data type</source>
        <translation>typ danej</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>n-port S parameter file</source>
        <translation>plik z parametrami S n-wrotnika</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>1-port S parameter file</source>
        <translation>plik z parameterami S jednowrotnika</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>2-port S parameter file</source>
        <translation>plik z parameterami S dwuwrotnika</translation>
    </message>
    <message>
        <location line="+75"/>
        <source>file</source>
        <translation>plik</translation>
    </message>
    <message>
        <location filename="../qucs/components/spicefile.cpp" line="+44"/>
        <source>SPICE netlist file</source>
        <translation>plik netlisty SPICE</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>SPICE netlist</source>
        <translation>netlista w formacie SPICE</translation>
    </message>
    <message>
        <location line="+36"/>
        <source>sim</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>spice</source>
        <translation>spice</translation>
    </message>
    <message>
        <location filename="../qucs/schematic_file.cpp" line="+432"/>
        <location filename="../qucs/components/spicefile.cpp" line="+68"/>
        <source>ERROR: No file name in SPICE component &quot;%1&quot;.</source>
        <translation>BŁĄD: Komponent SPICE &quot;%1&quot; nie ma nazwy pliku.</translation>
    </message>
    <message>
        <location filename="../qucs/components/spicefile.cpp" line="+10"/>
        <source>ERROR: Cannot open SPICE file &quot;%1&quot;.</source>
        <translation>BŁĄD: Nie można otworzyć pliku SPICE &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>ERROR: Cannot save converted SPICE file &quot;%1&quot;.</source>
        <translation>BŁĄD: Nie można zapisać przekonwertowanego pliku &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>ERROR: Cannot open converted SPICE file &quot;%1&quot;.</source>
        <translation>BŁĄD: Nie można otworzyć przekonwertowanego pliku &quot;%1&quot;.</translation>
    </message>
    <message>
        <location filename="../qucs/mouseactions.cpp" line="+1025"/>
        <location filename="../qucs/components/spicefile.cpp" line="+81"/>
        <source>Info</source>
        <translation>Informacja</translation>
    </message>
    <message>
        <location filename="../qucs/components/spicefile.cpp" line="+1"/>
        <source>Preprocessing SPICE file &quot;%1&quot;.</source>
        <translation>Preprocessing SPICE file &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>ERROR: Cannot save preprocessed SPICE file &quot;%1&quot;.</source>
        <translation>Nie można zapisać pliku SPICE &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>ERROR: Cannot execute &quot;%1&quot;.</source>
        <translation>BŁĄD: Nie mozna wykonać &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+57"/>
        <source>COMP ERROR: Cannot start QucsConv!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Converting SPICE file &quot;%1&quot;.</source>
        <translation>Konwersja pliku SPICE &quot;%1&quot;.</translation>
    </message>
    <message>
        <location filename="../qucs/components/subcircuit.cpp" line="+30"/>
        <source>subcircuit</source>
        <translation>podukład</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>name of qucs schematic file</source>
        <translation>nazwa pliku ze schematem programu qucs</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Subcircuit</source>
        <translation>Podukład</translation>
    </message>
    <message>
        <location filename="../qucs/components/subcirport.cpp" line="+24"/>
        <source>port of a subcircuit</source>
        <translation>port podukładu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>number of the port within the subcircuit</source>
        <translation>numer portu w podukładzie</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>type of the port (for digital simulation only)</source>
        <translation>typ portu (tylko dla symulacji cyfrowej)</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Conjugated port for XSPICE differential ports</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+62"/>
        <source>Subcircuit Port</source>
        <translation>Port podukładu</translation>
    </message>
    <message>
        <location filename="../qucs/components/substrate.cpp" line="-44"/>
        <source>substrate definition</source>
        <translation>nazwa podłoża</translation>
    </message>
    <message>
        <location line="+38"/>
        <source>relative permittivity</source>
        <translation>przenikalność względna</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>thickness in meters</source>
        <translation>grubość w metrach</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>thickness of metalization</source>
        <translation>grubość metalizacji</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>specific resistance of metal</source>
        <translation>reyastacja właściwa metalu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>rms substrate roughness</source>
        <translation>chropowatość podłoża (rms)</translation>
    </message>
    <message>
        <location line="+14"/>
        <location filename="../qucs/components/spiralinductor.cpp" line="-13"/>
        <location filename="../qucs/components/circularloop.cpp" line="-6"/>
        <source>Substrate</source>
        <translation>Podłoże</translation>
    </message>
    <message>
        <location filename="../qucs/components/switch.cpp" line="+25"/>
        <source>switch (time controlled)</source>
        <translation>przełącznik (kontrolowany czasowo)</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>initial state</source>
        <translation>stan początkowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>time when state changes (semicolon separated list possible, even numbered lists are repeated)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resistance of &quot;on&quot; state in ohms</source>
        <translation>rezystancja stanu włączenia w Ohmach</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resistance of &quot;off&quot; state in ohms</source>
        <translation>rezystancja stanu wyłączenia w Ohmach</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/resistor.cpp" line="-114"/>
        <location filename="../qucs/components/indq.cpp" line="+75"/>
        <location filename="../qucs/components/capq.cpp" line="+74"/>
        <source>simulation temperature in degree Celsius (Qucsator only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Max possible switch transition time (transition time 1/100 smallest value in &apos;time&apos;, or this number)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Resistance transition shape (Qucsator only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Switch</source>
        <translation>przełącznik</translation>
    </message>
    <message>
        <location filename="../qucs/components/symtrafo.cpp" line="+27"/>
        <source>ideal symmetrical transformer</source>
        <translation>idealny transformator symetryczny</translation>
    </message>
    <message>
        <location line="+64"/>
        <source>voltage transformation ratio of coil 1</source>
        <translation>przekładnia napięciowa uzwojenia 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>voltage transformation ratio of coil 2</source>
        <translation>przekładnia napięciowa uzwojenia 2</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>symmetric Transformer</source>
        <translation>transformator symetryczny</translation>
    </message>
    <message>
        <location filename="../qucs/components/tff_SR.cpp" line="-7"/>
        <source>T flip flop with set and reset verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+28"/>
        <source>T-FlipFlop w/ SR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/thyristor.cpp" line="-37"/>
        <source>silicon controlled rectifier (SCR)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>breakover voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate trigger current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Thyristor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/tline.cpp" line="-29"/>
        <source>ideal transmission line</source>
        <translation>idealna linia transmisyjna</translation>
    </message>
    <message>
        <location filename="../qucs/components/tline_4port.cpp" line="-2"/>
        <location filename="../qucs/components/tline.cpp" line="+27"/>
        <source>characteristic impedance</source>
        <translation>impedancja charakterystyczna</translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="../qucs/components/tline.cpp" line="+4"/>
        <location filename="../qucs/components/taperedline.cpp" line="-2"/>
        <source>attenuation factor per length in 1/m</source>
        <translation>współćzynnik tłumienia na długość w 1/m</translation>
    </message>
    <message>
        <location filename="../qucs/components/tline.cpp" line="+16"/>
        <source>Transmission Line</source>
        <translation>Linia transmisyjna</translation>
    </message>
    <message>
        <location filename="../qucs/components/tline_4port.cpp" line="-35"/>
        <source>ideal 4-terminal transmission line</source>
        <translation>idealna 4-wrotowa linia transmsyjna</translation>
    </message>
    <message>
        <location line="+51"/>
        <source>4-Terminal Transmission Line</source>
        <translation>4-wrotowa linia transmisyjna</translation>
    </message>
    <message>
        <location filename="../qucs/components/tr_sim.cpp" line="-48"/>
        <source>transient simulation</source>
        <translation>symulacja czasowa</translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_sens_tr_xyce.cpp" line="-21"/>
        <source>Transient .SENS analysis with Xyce</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Analysis mode </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/tr_sim.cpp" line="+10"/>
        <source>start time in seconds</source>
        <translation>czas początkowy w sekundach</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/tr_sim.cpp" line="+2"/>
        <source>stop time in seconds</source>
        <translation>czas końcowy w sekundach</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>simulation time step</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Transient sensitivity analysis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/tr_sim.cpp" line="+2"/>
        <source>number of simulation time steps</source>
        <translation>liczba kroków symulacji</translation>
    </message>
    <message>
        <location line="+32"/>
        <source>perform initial DC (set &quot;no&quot; to activate UIC)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Transient simulation</source>
        <translation>Symulacja czasowa</translation>
    </message>
    <message>
        <location filename="../qucs/components/transformer.cpp" line="+24"/>
        <source>ideal transformer</source>
        <translation>idealny transformator</translation>
    </message>
    <message>
        <location line="+39"/>
        <source>voltage transformation ratio</source>
        <translation>przekładnia napięciowa</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Transformer</source>
        <translation>Transformator</translation>
    </message>
    <message>
        <location filename="../qucs/components/triac.cpp" line="-41"/>
        <source>triac (bidirectional thyristor)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>(bidirectional) gate trigger current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Triac</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/tunneldiode.cpp" line="-36"/>
        <source>resonance tunnel diode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>peak current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>valley current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>valley voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resonance energy in Ws</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Fermi energy in Ws</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resonance width in Ws</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum of transmission</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fitting factor for electron density</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fitting factor for voltage drop</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fitting factor for diode current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>life-time of electrons</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+35"/>
        <source>Tunnel Diode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/twistedpair.cpp" line="-50"/>
        <source>twisted pair transmission line</source>
        <translation>Linia transmisyjna - skrętka dwużyłowa</translation>
    </message>
    <message>
        <location line="+36"/>
        <source>diameter of conductor</source>
        <translation>średnica przewodnika</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>diameter of wire (conductor and insulator)</source>
        <translation>średnica przewodu (przewodnik z izolatorem)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>physical length of the line</source>
        <translation>długość fizyczna linii</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>twists per length in 1/m</source>
        <translation>liczba skręceń na 1/m</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>dielectric constant of insulator</source>
        <translation>stała dielektryczna dielektryka</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Twisted-Pair</source>
        <translation>Skrętka</translation>
    </message>
    <message>
        <location filename="../qucs/components/vacomponent.cpp" line="-23"/>
        <location line="+24"/>
        <source>Symbol file not found: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/vccs.cpp" line="-41"/>
        <source>voltage controlled current source</source>
        <translation>źródło prądowe sterowane napięciem</translation>
    </message>
    <message>
        <location line="+40"/>
        <source>forward transconductance</source>
        <translation>transkonduktancja w przód</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Voltage Controlled Current Source</source>
        <translation>Źródło prądowe sterowane napięciem</translation>
    </message>
    <message>
        <location filename="../qucs/components/vcvs.cpp" line="-43"/>
        <source>voltage controlled voltage source</source>
        <translation>źródło napięciowe sterowane napięciem</translation>
    </message>
    <message>
        <location filename="../qucs/components/vcresistor.cpp" line="+25"/>
        <source>voltage controlled resistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+49"/>
        <source>resistance gain</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Voltage Controlled Resistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/vcvs.cpp" line="+57"/>
        <source>Voltage Controlled Voltage Source</source>
        <translation>Źródło napięciowe sterowane napięciem</translation>
    </message>
    <message>
        <location filename="../qucs/components/verilogfile.cpp" line="+31"/>
        <location line="+24"/>
        <source>Verilog file</source>
        <translation>Plik Verliog</translation>
    </message>
    <message>
        <location line="-21"/>
        <source>Name of Verilog file</source>
        <translation>NBazwa pliku Verilog</translation>
    </message>
    <message>
        <location line="+98"/>
        <source>verilog</source>
        <translation>Verilog</translation>
    </message>
    <message>
        <location filename="../qucs/schematic_file.cpp" line="+47"/>
        <location filename="../qucs/components/vhdlfile.cpp" line="+221"/>
        <location filename="../qucs/components/verilogfile.cpp" line="+45"/>
        <source>ERROR: No file name in %1 component &quot;%2&quot;.</source>
        <translation>BŁĄD: Coś nie tak z %1 i &quot;%2&quot;.</translation>
    </message>
    <message>
        <location filename="../qucs/components/vhdlfile.cpp" line="+11"/>
        <location filename="../qucs/components/verilogfile.cpp" line="+11"/>
        <source>ERROR: Cannot open %1 file &quot;%2&quot;.</source>
        <translation>BŁĄD: Nie mogę otworzyć &quot;%1&quot; plik &quot;%2&quot;.
</translation>
    </message>
    <message>
        <location filename="../qucs/components/vexp.cpp" line="-33"/>
        <source>exponential voltage source</source>
        <translation>wykładnicze źródło napięciowe</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>voltage before rising edge</source>
        <translation>napięcie przed zboczem narastającym</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum voltage of the pulse</source>
        <translation>maksymalne napięcie impulsu</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>rise time of the rising edge</source>
        <translation>czas narastania zbocza</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fall time of the falling edge</source>
        <translation>czas opadania zbocza</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Exponential Voltage Pulse</source>
        <translation>Wykładniczy Impuls Napięcia</translation>
    </message>
    <message>
        <location filename="../qucs/components/vfile.cpp" line="-37"/>
        <source>file based voltage source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+55"/>
        <source>File Based Voltage Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/vhdlfile.cpp" line="-202"/>
        <location line="+24"/>
        <source>VHDL file</source>
        <translation>Plik VHDL</translation>
    </message>
    <message>
        <location line="-21"/>
        <source>Name of VHDL file</source>
        <translation>Nazwa pliku VHDL</translation>
    </message>
    <message>
        <location line="+110"/>
        <source>vhdl</source>
        <translation>VHDL</translation>
    </message>
    <message>
        <location line="+42"/>
        <location line="+8"/>
        <source>generic variable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/volt_ac.cpp" line="-34"/>
        <source>ideal ac voltage source</source>
        <translation>idealne źródło napięciowe ac</translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/volt_ac_SPICE.cpp" line="+24"/>
        <source>AC voltage source (SPICE)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+44"/>
        <location filename="../qucs/components/volt_ac.cpp" line="+54"/>
        <source>ac Voltage Source</source>
        <translation>Źródło napięciowe ac</translation>
    </message>
    <message>
        <location filename="../qucs/components/volt_dc.cpp" line="-23"/>
        <source>ideal dc voltage source</source>
        <translation>idealne źródło napięciowe dc</translation>
    </message>
    <message>
        <location line="+52"/>
        <source>dc Voltage Source</source>
        <translation>Źródło napięciowe dc</translation>
    </message>
    <message>
        <location filename="../qucs/components/volt_noise.cpp" line="-31"/>
        <source>noise voltage source</source>
        <translation>szumowe źródło napięcia</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>voltage power spectral density in V^2/Hz</source>
        <translation>gęstość widmowa napięcia w A^2/Hz</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Noise Voltage Source</source>
        <translation>źródło napięcia szumów</translation>
    </message>
    <message>
        <location filename="../qucs/components/vprobe.cpp" line="+24"/>
        <source>voltage probe</source>
        <translation>próbnik napięcia</translation>
    </message>
    <message>
        <location line="+45"/>
        <source>Voltage Probe</source>
        <translation>próbnik napięcia</translation>
    </message>
    <message>
        <location filename="../qucs/components/vpulse.cpp" line="-38"/>
        <source>ideal voltage pulse source</source>
        <translation>idealne napięciowe źródło impulsowe</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>voltage before and after the pulse</source>
        <translation>napięcie po i przed impulsem</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>voltage of the pulse</source>
        <translation>napięcie impulsu</translation>
    </message>
    <message>
        <location line="+57"/>
        <source>Voltage Pulse</source>
        <translation>Impuls Napięcia</translation>
    </message>
    <message>
        <location filename="../qucs/components/vrect.cpp" line="-40"/>
        <source>ideal rectangle voltage source</source>
        <translation>idealne prostokątne źródło napięciowe</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>voltage of high signal</source>
        <translation>napięcie w stanie wysokim</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>voltage of low signal (SPICE only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+40"/>
        <source>Rectangle Voltage</source>
        <translation>Źródło napięciowego przebiegu prostokątnego</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/curvediagram.cpp" line="+258"/>
        <source>Locus Curve</source>
        <translation>Locus Curve</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/diagram.h" line="+29"/>
        <source> &lt;invalid&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/tabdiagram.cpp" line="+264"/>
        <location filename="../qucs/diagrams/marker.cpp" line="+278"/>
        <source>invalid</source>
        <translation>ułomny</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/polardiagram.cpp" line="+101"/>
        <source>Polar</source>
        <translation>Polarny układ współrzędnych</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/psdiagram.cpp" line="+128"/>
        <source>Polar-Smith Combi</source>
        <translation>Wykres Kombi Polar-Smith</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Smith-Polar Combi</source>
        <translation>Wykres Kombi Polar-Smith</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/rect3ddiagram.cpp" line="+1076"/>
        <source>3D-Cartesian</source>
        <translation>Układ współrzędnych kartezjańskich 3D</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/rectdiagram.cpp" line="+315"/>
        <source>Cartesian</source>
        <translation>Kartezjański układ współrzędnych</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/smithdiagram.cpp" line="+113"/>
        <source>Smith Chart</source>
        <translation>Wykres Smith&apos;a</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Admittance Smith</source>
        <translation>Admitancyjny wykres Smitha</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/truthdiagram.cpp" line="+88"/>
        <location filename="../qucs/diagrams/timingdiagram.cpp" line="+165"/>
        <location filename="../qucs/diagrams/tabdiagram.cpp" line="-95"/>
        <source>no variables</source>
        <translation>nie ma zmiennych</translation>
    </message>
    <message>
        <location line="+133"/>
        <location filename="../qucs/diagrams/timingdiagram.cpp" line="+49"/>
        <location line="+89"/>
        <location filename="../qucs/diagrams/tabdiagram.cpp" line="+144"/>
        <source>wrong dependency</source>
        <translation>zła zależność</translation>
    </message>
    <message>
        <location line="+7"/>
        <location filename="../qucs/diagrams/timingdiagram.cpp" line="-122"/>
        <location line="+113"/>
        <location filename="../qucs/diagrams/tabdiagram.cpp" line="+7"/>
        <source>no data</source>
        <translation>nie ma danych</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/tabdiagram.cpp" line="+98"/>
        <source>Tabular</source>
        <translation>Tabela</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/timingdiagram.cpp" line="+233"/>
        <source>Timing Diagram</source>
        <translation>Wykres czasowy</translation>
    </message>
    <message>
        <location filename="../qucs/diagrams/truthdiagram.cpp" line="+46"/>
        <source>Truth Table</source>
        <translation>Tabela prawdy</translation>
    </message>
    <message>
        <location filename="../qucs/dialogs/librarydialog.cpp" line="-291"/>
        <source>ERROR: Cannot open file &quot;%1&quot;.
</source>
        <translation>BŁĄD: Nie mogę otworzyć pliku &quot;%1&quot;!.
</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>ERROR: Cannot create user library subdirectory !
</source>
        <translation>BŁĄD: Nie można stworzyć podkatalogu z biblioteką użytkownika!
</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>ERROR: Cannot create file &quot;%1&quot;.
</source>
        <translation>BŁĄD: Nie mogę utworzyć pliku &quot;%1&quot;.
</translation>
    </message>
    <message>
        <location filename="../qucs/imagewriter.cpp" line="+141"/>
        <source>Overwrite</source>
        <translation type="unfinished">Nadpisać</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>File &quot;%1&quot; already exists.
Overwrite ?</source>
        <translation type="unfinished">Plik &quot;%1&quot; już istnieje.
Nadpisać ?</translation>
    </message>
    <message>
        <location line="+93"/>
        <location line="+13"/>
        <location line="+5"/>
        <source>Export to image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-17"/>
        <source>Inkscape start error!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/qucs.cpp" line="+3420"/>
        <source>Successfully exported</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/imagewriter.cpp" line="+13"/>
        <location filename="../qucs/extsimkernels/externsimdialog.cpp" line="+51"/>
        <source>Disk write error!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Unsupported format of graphics file. 
Use PNG, JPEG or SVG graphics!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/misc.cpp" line="+420"/>
        <location line="+64"/>
        <source>Error: Wrong time format in &quot;%1&quot;. Use positive number with units</source>
        <translation>Błąd: Zły format czasu w &quot;%1&quot;. Użyj wartości dodatnich z jednostką</translation>
    </message>
    <message>
        <location filename="../qucs/qucs_actions.cpp" line="+128"/>
        <location line="+20"/>
        <location filename="../qucs/qucs.cpp" line="-2534"/>
        <location filename="../qucs/module.cpp" line="+128"/>
        <source>verilog-a user devices</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/module.cpp" line="+68"/>
        <location line="+2"/>
        <source>lumped components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>sources</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>probes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>RF components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>transmission lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>nonlinear components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <source>microelectronics</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <source>verilog-a devices</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>digital components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <source>file components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>simulations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>equations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>SPICE components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>SPICE netlist sections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>SPICE simulations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>XSPICE devices</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>Qucs legacy devices</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/qucs.cpp" line="+1758"/>
        <location line="+91"/>
        <location line="+777"/>
        <location filename="../qucs/module.cpp" line="-24"/>
        <location line="+4"/>
        <source>diagrams</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-2760"/>
        <location filename="../qucs/module.cpp" line="+2"/>
        <location line="+2"/>
        <source>paintings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/module.cpp" line="+2"/>
        <source>external sim components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/mouseactions.cpp" line="-153"/>
        <source>Edit Properties</source>
        <translation>Edytuj właściwości</translation>
    </message>
    <message>
        <location line="+42"/>
        <source>Export as image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>power matching</source>
        <translation>dopasowanie mocy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>noise matching</source>
        <translation>dopasowanie szumowe</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>2-port matching</source>
        <translation>dopasowanie dwuwrotowe</translation>
    </message>
    <message>
        <location line="+75"/>
        <source>The ground potential cannot be labeled!</source>
        <translation>Nie można przypisać nazwy do potencjału masy!</translation>
    </message>
    <message>
        <location filename="../qucs/paintings/arrow.cpp" line="+111"/>
        <source>Arrow</source>
        <translation>Strzałka</translation>
    </message>
    <message>
        <location filename="../qucs/paintings/ellipse.cpp" line="+99"/>
        <source>Ellipse</source>
        <translation>Elipsa</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>filled Ellipse</source>
        <translation>wypełniona elipsa</translation>
    </message>
    <message>
        <location line="+269"/>
        <source>Edit Ellipse Properties</source>
        <translation>Zmień właściwości elipsy</translation>
    </message>
    <message>
        <location filename="../qucs/paintings/ellipsearc.cpp" line="+93"/>
        <source>Elliptic Arc</source>
        <translation>Wycinek elipsy</translation>
    </message>
    <message>
        <location line="+304"/>
        <source>Edit Arc Properties</source>
        <translation>Edytuj właściwości łuku</translation>
    </message>
    <message>
        <location filename="../qucs/paintings/graphicline.cpp" line="+91"/>
        <source>Line</source>
        <translation>Linia</translation>
    </message>
    <message>
        <location line="+240"/>
        <source>Edit Line Properties</source>
        <translation>Zmień właściwości linii</translation>
    </message>
    <message>
        <location filename="../qucs/paintings/graphictext.cpp" line="+110"/>
        <source>Text</source>
        <translation>Tekst</translation>
    </message>
    <message>
        <location filename="../qucs/paintings/rectangle.cpp" line="+98"/>
        <source>Rectangle</source>
        <translation>Prostokąt</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>filled Rectangle</source>
        <translation>wypełniony prostokąt</translation>
    </message>
    <message>
        <location line="+269"/>
        <source>Edit Rectangle Properties</source>
        <translation>Zmień właściwości kwadratu</translation>
    </message>
    <message>
        <location filename="../qucs/printerwriter.cpp" line="+97"/>
        <source>Print Document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/qucs_actions.cpp" line="-147"/>
        <source>Cannot create output file!</source>
        <translation>Nie mogę utworzyć pliku wyjściowego!</translation>
    </message>
    <message>
        <source>untitled</source>
        <translation type="vanished">bez nazwy</translation>
    </message>
    <message>
        <location filename="../qucs/schematic_file.cpp" line="-1505"/>
        <location line="+932"/>
        <source>Format Error:
&apos;Painting&apos; field is not closed!</source>
        <translation>Błąd formatu:
Pole &apos;Painting&apos; nie zostało zamknięte!</translation>
    </message>
    <message>
        <location line="-914"/>
        <source>Wrong document version: </source>
        <translation>Nieodpowiednia wersja dokumentu:</translation>
    </message>
    <message>
        <location line="+21"/>
        <location line="+24"/>
        <source>Clipboard Format Error:
Unknown field!</source>
        <translation>Błąd formatu schowka:
Nieznane pole!</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Cannot save C++ file &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+72"/>
        <source>Cannot open Verilog-A file &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+38"/>
        <location line="+120"/>
        <source>Cannot save JSON props file &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-83"/>
        <source>No valid osdi file. Re-compile verilog-a file first!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+129"/>
        <source>Cannot save JSON symbol file &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+78"/>
        <source>Cannot save document!</source>
        <translation>Nie można zapisać pliku!</translation>
    </message>
    <message>
        <location line="+208"/>
        <location line="+5"/>
        <source>Format Error:
Wrong property field limiter!</source>
        <translation>Błąd formatu:
Błędny ogranicznik pola właściwości!</translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Format Error:
Unknown property: </source>
        <translation>Błąd formatu:
Nieznana właściwość:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Format Error:
Number expected in property field!</source>
        <translation>Błąd formatu:
Oczekiwana liczba w polu właściwości!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Format Error:
&apos;Property&apos; field is not closed!</source>
        <translation>Błąd formatu:
Pole &apos;Property&apos; nie zostało zamknięte!</translation>
    </message>
    <message>
        <location line="+68"/>
        <source>Format Error:
&apos;Component&apos; field is not closed!</source>
        <translation>Błąd formatu:
Pole Component&apos; nie zostało zamknięte!</translation>
    </message>
    <message>
        <location line="+59"/>
        <source>Format Error:
Wrong &apos;wire&apos; line format!</source>
        <translation>Błąd formatu:
Błędny format lini &apos;wire&apos;!</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Format Error:
&apos;Wire&apos; field is not closed!</source>
        <translation>Błąd formatu:
Pole &apos;Wire&apos; nie zostało zamknięte!</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Format Error:
Unknown diagram!</source>
        <translation>Błąd formatu:
Nieznany wykres!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Format Error:
Wrong &apos;diagram&apos; line format!</source>
        <translation>Błąd formatu:
Błędny format lini &apos;diagram&apos;!</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Format Error:
&apos;Diagram&apos; field is not closed!</source>
        <translation>Błąd formatu:
Pole &apos;Diagram&apos; nie zostało zamknięte!</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Format Error:
Wrong &apos;painting&apos; line delimiter!</source>
        <translation>Błąd formatu:
Błędny ogranicznik pola &apos;painting&apos;!</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Format Error:
Unknown painting!</source>
        <translation>Błąd formatu:
Nieznany wzór graficzny!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Format Error:
Wrong &apos;painting&apos; line format!</source>
        <translation>Błąd formatu:
Błędny format lini &apos;painting&apos;!</translation>
    </message>
    <message>
        <location line="+23"/>
        <location line="+3"/>
        <source>Cannot load document: </source>
        <translation>Nie można otworzyć pliku:</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Wrong document type: </source>
        <translation>Zły typ dokumentu: </translation>
    </message>
    <message>
        <location line="+9"/>
        <location filename="../qucs/dialogs/matchdialog.cpp" line="-125"/>
        <location line="+131"/>
        <location filename="../qucs/components/component.cpp" line="-26"/>
        <location filename="../qucs-transcalc/qucstrans.cpp" line="+1134"/>
        <location filename="../qucs-filter/stepz_filter.cpp" line="+45"/>
        <source>Warning</source>
        <translation>Ostrzeżenie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Wrong document version 
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Try to open it anyway?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+42"/>
        <source>File Format Error:
Unknown field!</source>
        <translation>Błąd formatu pliku:
Nieznane pole!</translation>
    </message>
    <message>
        <location line="+304"/>
        <source>ERROR: Component &quot;%1&quot; has no analog model.</source>
        <translation>BŁĄD: Komponent &quot;%1&quot; nie ma modelu analogowego.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>ERROR: Component &quot;%1&quot; has no digital model.</source>
        <translation>BŁĄD: Komponent &quot;%1&quot; nie ma modelu cyfrowego.</translation>
    </message>
    <message>
        <location line="+47"/>
        <source>ERROR: Cannot load subcircuit &quot;%1&quot;.</source>
        <translation>Błąd: Nie można otworzyć podukładu  &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+38"/>
        <source>WARNING: Skipping library component &quot;%1&quot;.</source>
        <translation>OSTRZEŻENIE: Pominięto elelemnt biblioteczny &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>ERROR: &quot;%1&quot;: Cannot load library component &quot;%2&quot; from &quot;%3&quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+214"/>
        <source>WARNING: Ignore simulation component in subcircuit &quot;%1&quot;.</source>
        <translation>OSTRZEŻENIE: Pomijam element w podukładzie &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+207"/>
        <source>WARNING: Equations in &quot;%1&quot; are &apos;time&apos; typed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+110"/>
        <source>ERROR: Only one digital simulation allowed.</source>
        <translation>BŁĄD: Tylko jedna symulacja cyfrowa dozwolona.</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>ERROR: Analog and digital simulations cannot be mixed.</source>
        <translation>BŁĄD: Nie można mieszać symulacji cyfrowej z analogową.</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>ERROR: Digital simulation needs at least one digital source.</source>
        <translation>BŁĄD: Symulacja cyfrowa wymaga przynajmniej jednego cyfrowego źródła.</translation>
    </message>
    <message>
        <location filename="../qucs-activefilter/filter.cpp" line="+237"/>
        <source>Part list</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Filter order = %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Zeros list Pk=Re+j*Im</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>LPF prototype poles list Pk=Re+j*Im</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Poles list Pk=Re+j*Im</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Qucs Editor Version </source>
        <translation type="vanished">Wersja edytora programu Qucs</translation>
    </message>
    <message>
        <source>
Very simple text editor for Qucs
</source>
        <translation type="vanished">
Bardzo prosty edytor tekstowy programu Qucs
</translation>
    </message>
    <message>
        <source>Copyright (C) 2004, 2005 by Michael Margraf
</source>
        <translation type="vanished">Copyright (C) 2004, 2005 by Michael Margraf
</translation>
    </message>
    <message>
        <source>
Usage:  qucsedit [-r] file
</source>
        <translation type="vanished">
Stosowanie:  qucsedit [-r] plik
</translation>
    </message>
    <message>
        <source>    -h  display this help and exit
</source>
        <translation type="vanished">    -h  wyświetla ten komunikat i wychodzi
</translation>
    </message>
    <message>
        <source>    -r  open file read-only
</source>
        <translation type="vanished">    -r  otwiera plik tzlko do odczytu
</translation>
    </message>
    <message>
        <source>Too long command line argument!

</source>
        <translation type="vanished">Za długi argument komendy!

</translation>
    </message>
    <message>
        <source>Wrong command line argument!

</source>
        <translation type="vanished">Zły argument komendy!

</translation>
    </message>
    <message>
        <source>Only one filename allowed!

</source>
        <translation type="vanished">Tylko jedna naywa pliku dozwolona!

</translation>
    </message>
    <message>
        <location filename="../qucs-filter/stepz_filter.cpp" line="+1"/>
        <source>High-impedance is %1 ohms, low-impedance is %2 ohms.
To get acceptable results it is recommended to use
a substrate with lower permittivity and larger height.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot save settings !</source>
        <translation type="vanished">Nie można zapisać ustawień!</translation>
    </message>
    <message>
        <location filename="../qucs-filter/quarterwave_filter.cpp" line="+1"/>
        <source>Quarter wave filters do not allow low-pass nor high-pass masks
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs-transcalc/qucstrans.cpp" line="+1"/>
        <source>Cannot save GUI settings in
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/xyce_script.cpp" line="+23"/>
        <location line="+28"/>
        <source>XYCE script</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/xspicegeneric.cpp" line="+31"/>
        <location line="+26"/>
        <source>XSPICE generic device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-23"/>
        <source>PortsList</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>.MODEL definition reference</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+70"/>
        <source>XSPICE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/xsp_codemodel.cpp" line="+26"/>
        <source>XSPICE CodeModel: cfunc.mod and ifspec.ifs files pair
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+27"/>
        <source>XSPICE CodeModel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/xsp_cmlib.cpp" line="+27"/>
        <source>XSPICE precompiled CodeModel library
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+6"/>
        <source>Precompiled CM-library</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+30"/>
        <source>XSPICE precompiled CM-library</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/vTRRANDOM.cpp" line="+28"/>
        <source>SPICE V(TRRANDOM):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+35"/>
        <source> Distribution selector (1 to 4)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Duration of each random voltage value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Time delay before random voltages output ( for time &lt; Td  Vout  =  0 V)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Changes with  different values of Type.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Changes with different values of Type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>V(TRRANDOM)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/vTRNOISE.cpp" line="+28"/>
        <source>SPICE V(TRNOISE): </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+29"/>
        <location filename="../qucs/spicecomponents/iTRNOISE.cpp" line="+61"/>
        <source> Rms noise amplitude Gaussian)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iTRNOISE.cpp" line="+2"/>
        <source>Time step</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iTRNOISE.cpp" line="+2"/>
        <source>1/f exponent (0  &lt; alpha &lt; 2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iTRNOISE.cpp" line="+2"/>
        <location line="+2"/>
        <source>Amplitude (1/f)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iTRNOISE.cpp" line="+2"/>
        <source>Trap capture time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iTRNOISE.cpp" line="+2"/>
        <source>Trap emission time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>V(TRNOISE)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/vPWL.cpp" line="+28"/>
        <source>SPICE V(PWL):
Multiple line ngspice or Xyce V specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+52"/>
        <source>V(PWL)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/vAmpMod.cpp" line="+28"/>
        <source>SPICE V(AM): ngspice only.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+30"/>
        <location filename="../qucs/spicecomponents/iAmpMod.cpp" line="+56"/>
        <source>voltage amplitude</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iAmpMod.cpp" line="+2"/>
        <source>offset voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iAmpMod.cpp" line="+2"/>
        <source>modulation frequency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iAmpMod.cpp" line="+2"/>
        <source>carrier frequency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/iAmpMod.cpp" line="+2"/>
        <source>signal delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>V(AM)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/src_eqndef.cpp" line="+8"/>
        <source>SPICE B (V type):
Multiple line ngspice or Xyce B specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.  </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+50"/>
        <source>B source (V)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/spicelibcomp.cpp" line="+36"/>
        <source>SPICE library device. You can attach symbol patterns to it.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>SpiceLibrary file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Subcircuit entry (.SUBCKT) name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Extra parameters list</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Pins assignment</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>SPICE library device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/spicegeneric.cpp" line="+29"/>
        <location line="+29"/>
        <source>SPICE generic device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-25"/>
        <source>Number of pins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>SPICE device letter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>.MODEL definition reference (optional)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Parameter string (optional)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+57"/>
        <source>SPICE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_spiceinit.cpp" line="+24"/>
        <source>.spiceinit file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.spiceinit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>.spiceinit contents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_spectrum.cpp" line="+25"/>
        <location line="+28"/>
        <source>Spectrum analysis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_sens_xyce.cpp" line="+24"/>
        <source>DC .SENS simulation with Xyce</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <location filename="../qucs/spicecomponents/sp_sens_tr_xyce.cpp" line="-26"/>
        <source>Output expressions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/spicecomponents/sp_sens_tr_xyce.cpp" line="+2"/>
        <source>Reference parameter for .SENS analysis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Parameter for DC sweep</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>start value for DC sweep</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>stop value for DC sweep</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Simulation step for DC sweep</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <location filename="../qucs/spicecomponents/sp_sens.cpp" line="-17"/>
        <location line="+31"/>
        <source>DC sensitivity simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_pz.cpp" line="+24"/>
        <location line="+30"/>
        <source>Pole-Zero simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-21"/>
        <source>Two input nodes list (space separated)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Two output nodes list (space separated)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Transfer function type (current/voltage)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Analysis mode (Pole-Zero, Poles only, Zeros only)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_parameter.cpp" line="+27"/>
        <source>.PARAM section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.PARAM</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>.PARAM Section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_options.cpp" line="+27"/>
        <source>.OPTIONS section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.OPTIONS</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Xyce option package name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>.OPTIONS Section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_nutmeg.cpp" line="+28"/>
        <source>Nutmeg equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>Nutmeg</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Nutmeg Equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_noise.cpp" line="-15"/>
        <location line="+34"/>
        <source>Noise simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-17"/>
        <source>Node at which the total output is desired</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Independent source to which input noise is referred.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_nodeset.cpp" line="+27"/>
        <source>.NODESET section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.NODESET</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>.NODESET Section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_model.cpp" line="+27"/>
        <source>.MODEL section
Multiple line ngspice or Xyce .MODEL allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+6"/>
        <source>.MODEL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+30"/>
        <source>.MODEL Section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_lib.cpp" line="+27"/>
        <source>.LIB directive
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.LIB</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>.Lib directive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_include.cpp" line="+28"/>
        <source>.INCLUDE statement
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.INCLUDE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+30"/>
        <source>.INCLUDE statement</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_ic.cpp" line="+27"/>
        <source>.IC section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.IC</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>.IC Section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_globalpar.cpp" line="+27"/>
        <source>.GLOBAL_PARAM section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>.GLOBAL_PARAM</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>.GLOBAL PARAM</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>.GLOBAL_PARAM Section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_func.cpp" line="+27"/>
        <source>.FUNC new function definition</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.FUNC</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>.FUNC new function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_fourier.cpp" line="+24"/>
        <location line="+26"/>
        <source>Fourier simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_disto.cpp" line="-15"/>
        <location line="+32"/>
        <source>Distortion simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-15"/>
        <source>Second frequency parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/sp_customsim.cpp" line="+23"/>
        <location line="+39"/>
        <source>Nutmeg script</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/isffm.cpp" line="-36"/>
        <source>SPICE I(SFFM):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+28"/>
        <source>offset current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>carrier current amplitude</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>I(SFFM)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/incl_script.cpp" line="+27"/>
        <source>Include script before simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+6"/>
        <source>.INCLUDE SCRIPT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>Include script</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/iTRNOISE.cpp" line="-45"/>
        <source>SPICE I(TRNOISE):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+61"/>
        <source>I(TRNOISE)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/iPWL.cpp" line="+28"/>
        <source>SPICE I(PWL):
Multiple line ngspice or Xyce I specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+53"/>
        <source>I(PWL)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/iAmpMod.cpp" line="-36"/>
        <source>SPICE I(AM): ngspice only.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+52"/>
        <source>I(AM)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/gNL.cpp" line="+26"/>
        <source>SPICE G (VOL, VALUE, TABLE, POLY):
Multiple line ngspice non-linear G specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+46"/>
        <source>G</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/eNL.cpp" line="+26"/>
        <source>SPICE E (CUR, VALUE, TABLE, POLY):
Multiple line ngspice non-linear E specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+47"/>
        <source>E</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/core.cpp" line="+26"/>
        <source>XSPICE core block:
seven line XSPICE specification. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+55"/>
        <source>core</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/XAPWL.cpp" line="+26"/>
        <source>PWL controlled voltage source:
Seven line XSPICE specification. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+48"/>
        <source>XAPWL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/UDRCTL_SPICE.cpp" line="+28"/>
        <source>SPICE U(URC):
Multiple line ngspice or Xyce U specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+55"/>
        <source>U(URC)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/SDTF.cpp" line="+26"/>
        <source>S domain transfer function block:
Seven line XSPICE specification. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+48"/>
        <source>SDTF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/S4Q_W.cpp" line="+28"/>
        <source>SPICE W:
Multiple line ngspice or Xyce W specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.  </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+49"/>
        <source> W(CSW)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/S4Q_V.cpp" line="+29"/>
        <source>SPICE V:
Multiple line ngspice or Xyce V specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.  </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+44"/>
        <source>V Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/S4Q_S.cpp" line="+28"/>
        <source>SPICE S:
Multiple line ngspice or Xyce S specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.  </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+56"/>
        <source> S(SW)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/S4Q_Ieqndef.cpp" line="+25"/>
        <source>SPICE B (I type):
Multiple line ngspice or Xyce B specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.  </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+52"/>
        <source>B source (I)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/S4Q_I.cpp" line="+29"/>
        <source>SPICE I:
Multiple line ngspice or Xyce I specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.  </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+44"/>
        <source>I Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/R_SPICE.cpp" line="+27"/>
        <source>SPICE R:
Multiple line ngspice or Xyce R specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.  </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+63"/>
        <source> R Resistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>R Resistor 3 pin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/PNP_SPICE.cpp" line="+28"/>
        <source>Q(PNP) BJT:
Multiple line ngspice or Xyce Q model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+58"/>
        <source>Q(PNP) BJT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/PMOS_SPICE.cpp" line="+28"/>
        <source>M(PMOS) MOS:
Multiple line ngspice or Xyce M model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+65"/>
        <source>M(PMOS)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/PMF_MESFET_SPICE.cpp" line="+28"/>
        <source>Z(PMF) MESFET:
Multiple line ngspice or Xyce Z model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+49"/>
        <source>Z(PMF)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/PJF_SPICE.cpp" line="+28"/>
        <source>J(PJF) JFET:
Multiple line ngspice or Xyce J model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+56"/>
        <source>J(PJF) JFET</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/NPN_SPICE.cpp" line="+28"/>
        <location filename="../qucs/spicecomponents/BJT_SPICE.cpp" line="+28"/>
        <source>Q(NPN) BJT:
Multiple line ngspice or Xyce Q model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+57"/>
        <location filename="../qucs/spicecomponents/BJT_SPICE.cpp" line="+88"/>
        <source>Q(NPN) BJT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/NMOS_SPICE.cpp" line="+28"/>
        <source>M(NMOS) MOS:
Multiple line ngspice or Xyce M model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+65"/>
        <source>M(NMOS)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/NJF_SPICE.cpp" line="+28"/>
        <source>J(NJF) JFET:
Multiple line ngspice or Xyce J model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+56"/>
        <source>J(NJF) JFET</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/MOS_SPICE.cpp" line="+28"/>
        <source>Unified (M,X,3-,4-pin) MOS:
Multiple line ngspice or Xyce M model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+41"/>
        <source>unified MOSFET (3-4 pin)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>M(NMOS 3 pin)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>M(PMOS 3 pin)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>X(NMOS 3 pin)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>X(PMOS 3 pin)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>X(NMOS 4 pin)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>X(PMOS 4 pin)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/MESFET_SPICE.cpp" line="+28"/>
        <source>Z(NMF) MESFET:
Multiple line ngspice or Xyce Z model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+49"/>
        <source>Z(NMF)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/L_SPICE.cpp" line="+28"/>
        <source>SPICE L:
Multiple line ngspice or Xyce L specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.  </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+46"/>
        <source>L Inductor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/LTRA_SPICE.cpp" line="+28"/>
        <source>SPICE O(LTRA):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+57"/>
        <source>O(LTRA)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/K_SPICE.cpp" line="+28"/>
        <source>SPICE K:
Enter the names of the coupled inductances and their coupling factor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Coupling factor ( 0  &lt;  K  &lt;= 1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>K coupling</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/Icouple.cpp" line="+26"/>
        <source>XSPICE coupled inductor block:
two line XSPICE specification. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+65"/>
        <source>Icouple</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/DIODE_SPICE.cpp" line="+28"/>
        <source>SPICE D:
Multiple line ngspice or Xyce D model specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+63"/>
        <source>D Diode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>D Diode 3 pin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/C_SPICE.cpp" line="+28"/>
        <source>SPICE C:
Multiple line ngspice or Xyce C specifications allowed using &quot;+&quot; continuation lines.
Leave continuation lines blank when NOT in use.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+58"/>
        <source>C Capacitor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>C Capacitor 3 pin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/spicecomponents/BJT_SPICE.cpp" line="+9"/>
        <source>Q(NPN) 4 pin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Q(PNP) 4 pin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Q(NPN) 5 pin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Q(PNP) 5 pin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/schematic.cpp" line="+2651"/>
        <source>The schematic name and dataset/display file name is not matching! This may happen if schematic was copied using the file manager instead of using File-&gt;SaveAs. Correct dataset and display names automatically?

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Schematic file: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Dataset file: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Display file: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Open document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/extsimkernels/spicecompat.cpp" line="+368"/>
        <source>Not Specified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+12"/>
        <source>Qucsator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-9"/>
        <source>Ngspice</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>SpiceOpus</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Xyce</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/extsimkernels/externsimdialog.cpp" line="-1"/>
        <source>Save netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/indq.cpp" line="-45"/>
        <source>Lossy inductor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+36"/>
        <source>Inductance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/capq.cpp" line="-7"/>
        <source>Quality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/capq.cpp" line="+2"/>
        <source>Frequency at which Q is measured</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs/components/capq.cpp" line="+2"/>
        <source>Q frequency profile</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Inductor with Q</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/capq.cpp" line="-42"/>
        <source>Lossy capacitor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+36"/>
        <source>Capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Capacitor with Q</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/dialogs/matchdialog.cpp" line="-136"/>
        <source>The load has not resistive part. It cannot be matched using the quarter wavelength method</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+131"/>
        <source>Reactive loads cannot be matched. Only the real part will be matched</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-103"/>
        <location filename="../qucs-powercombining/qucspowercombiningtool.cpp" line="+1"/>
        <source>Chebyshev weighting for N&gt;7 is not available</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+97"/>
        <source>The load is reactive. It cannot be matched using the quarter wavelength method</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/taperedline.cpp" line="-37"/>
        <source>Exponential Tapered line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Characteristic impedance at port 1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Characteristic impedance at port 2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Line length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Taper weighting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Maximum ripple (Klopfenstein taper only) </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Tapered line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/circline.cpp" line="+30"/>
        <location line="+53"/>
        <source>Circular Waveguide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/circularloop.cpp" line="-21"/>
        <source>Printed loop inductor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <location filename="../qucs/components/circline.cpp" line="-29"/>
        <source>Radius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Circular loop</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/circline.cpp" line="+2"/>
        <source>Mechanical length of the line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Relative permittivity of dielectric</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Relative permeability of conductor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Loss tangent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Specific resistance of conductor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Simulation temperature in degree Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Material parameter for temperature model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/paintings/portsymbol.cpp" line="+241"/>
        <location line="+35"/>
        <source>Port name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-34"/>
        <location line="+35"/>
        <source>Input port name:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/components/spiralinductor.cpp" line="-25"/>
        <source>Planar spiral inductor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Spiral type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="../qucs/components/circularloop.cpp" line="-19"/>
        <source>Width of line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Inner diameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Spacing between turns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Number of turns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Spiral inductor</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QucsActiveFilter</name>
    <message>
        <location filename="../qucs-activefilter/qucsactivefilter.cpp" line="+45"/>
        <source>&amp;File</source>
        <translation>&amp;Plik</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>E&amp;xit</source>
        <translation>Wy&amp;jście</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&amp;View</source>
        <translation>&amp;Widok</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;Console</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Enables/disables the filter calculation console</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Console

Enables/disables the filter calculation console</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&amp;Help</source>
        <translation>&amp;Pomoc</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Help...</source>
        <translation>Pomoc...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;About QucsActiveFilter...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>About Qt...</source>
        <translation>O bibliotece QT...</translation>
    </message>
    <message>
        <location line="+15"/>
        <location line="+472"/>
        <source>Passband attenuation, Ap (dB)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-471"/>
        <source>Stopband attenuation, As (dB)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+468"/>
        <source>Cutoff frequency, Fc (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-467"/>
        <location line="+468"/>
        <source>Stopband frequency, Fs (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-467"/>
        <source>Passband ripple Rp(dB)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Passband gain, Kv (dB)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Filter order</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Approximation type:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Butterworth</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Chebyshev</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inverse Chebyshev</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cauer (Elliptic)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Bessel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Legendre</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User defined</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Manually define transfer function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Calculate and copy to clipboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Low Pass</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+73"/>
        <source>General filter amplitude-frequency response</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+144"/>
        <location line="+23"/>
        <location line="+21"/>
        <source>Unable to implement filter with such parameters and topology 
Change parameters and/or topology and try again!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+2"/>
        <source>Filter calculation was successful</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Filter calculation terminated with error!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Filter calculation terminated with error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+130"/>
        <source>Lower cutoff frequency, Fl (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+55"/>
        <source>Copyright (C) 2014, 2015 by</source>
        <translation type="unfinished">Copyright (C) 2005, 2006 by {2014, 2015 ?}</translation>
    </message>
    <message>
        <location line="-467"/>
        <source>Filter topology</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Filter type:</source>
        <translation>Typ filtra:</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>High Pass</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Band Pass</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Band Stop</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Multifeedback (MFB)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Sallen-Key (S-K)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+358"/>
        <source>Cauer section</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-350"/>
        <source>Filter parameters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Transfer function and Topology</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+41"/>
        <source>Filter topology preview</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Filter calculation console</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+323"/>
        <source>Ready.</source>
        <translation>Gotowe.</translation>
    </message>
    <message>
        <location line="-294"/>
        <source>Upper cutoff frequency of band-pass/band-stop filter is
less than lower. Unable to implement such filter.
Change parameters and try again.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+70"/>
        <source>Unable to use Cauer section for Chebyshev or Butterworth 
frequency response. Try to use another topology.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Unable to use MFB filter for Cauer or Inverse Chebyshev 
frequency response. Try to use another topology.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Function will be implemented in future version</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+141"/>
        <source>Upper cutoff frequency, Fu (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Transient bandwidth, TW (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Error!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Active filter design</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>About...</source>
        <translation>O...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>
Active Filter synthesis program
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>About Qt</source>
        <translation>O QT</translation>
    </message>
</context>
<context>
    <name>QucsApp</name>
    <message>
        <location filename="../qucs/qucs.cpp" line="-626"/>
        <source>Schematic</source>
        <translation>Schemat</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Data Display</source>
        <translation>Prezentacja wyników</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Qucs Documents</source>
        <translation>Dokumentu programu Qucs</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+1676"/>
        <source>VHDL Sources</source>
        <translation>Źródła VHDL</translation>
    </message>
    <message>
        <location line="-1675"/>
        <location line="+1676"/>
        <source>Verilog Sources</source>
        <translation>Źródła Verilog</translation>
    </message>
    <message>
        <location line="-1675"/>
        <location line="+1676"/>
        <source>Verilog-A Sources</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1675"/>
        <location line="+1676"/>
        <source>Octave Scripts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1675"/>
        <source>Spice Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/qucs_actions.cpp" line="-19"/>
        <location filename="../qucs/qucs.cpp" line="+1"/>
        <location line="+1678"/>
        <source>Any File</source>
        <translation>Dowolny Plik</translation>
    </message>
    <message>
        <location filename="../qucs/qucs.cpp" line="+341"/>
        <source>The schematic search path has been refreshed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+705"/>
        <source>Verilog</source>
        <translation>Verilog</translation>
    </message>
    <message>
        <location line="-2"/>
        <source>VHDL</source>
        <translation>VHDL</translation>
    </message>
    <message>
        <location line="-1177"/>
        <source>Open file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Document opened in read-only mode! Simulation will not work. Please copy the document to the directory where you have write permission!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+335"/>
        <source>Open example…</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Select example schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Open example canceled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+486"/>
        <location line="+941"/>
        <location line="+20"/>
        <source>Simulate schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-960"/>
        <source>DC bias simulation mode is not supported for digital schematic!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+343"/>
        <source>Schematics</source>
        <translation>Schematy</translation>
    </message>
    <message>
        <location line="-2531"/>
        <source>New</source>
        <translation>Nowy</translation>
    </message>
    <message>
        <location line="-195"/>
        <source>Symbol only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+91"/>
        <location line="+25"/>
        <source>QucsatorRF found at: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-23"/>
        <source>
You can specify another location later using Simulation-&gt;Simulators Setings
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>
NOTE: Only QucsatorRF found. This simulator is not recommended for general purpose schematics.  Please install Ngspice.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Qucs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>No simulators found automatically. Please specify simulators in the next dialog window.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+61"/>
        <source>Main Dock</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Open</source>
        <translation>Otwórz</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Delete</source>
        <translation>Usuń</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Projects</source>
        <translation>Projekty</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>content of project directory</source>
        <translation>zawartość katalogu projektowego</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Content</source>
        <translation>Zawartość</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>content of current project</source>
        <translation>zawartość aktaualnego projektu</translation>
    </message>
    <message>
        <location line="+92"/>
        <source>Search Components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+33"/>
        <source>Clear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-16"/>
        <source>Components</source>
        <translation>Elementy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>components and diagrams</source>
        <translation>Elementy i wykresy</translation>
    </message>
    <message>
        <location line="+35"/>
        <location line="+23"/>
        <source>Libraries</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>system and user component libraries</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Octave Dock</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/qucs_actions.cpp" line="-620"/>
        <location line="+152"/>
        <location line="+17"/>
        <location line="+11"/>
        <location line="+8"/>
        <location line="+7"/>
        <location line="+17"/>
        <location line="+59"/>
        <location line="+32"/>
        <location line="+16"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+225"/>
        <location line="+51"/>
        <location line="+120"/>
        <location filename="../qucs/qucs.cpp" line="+106"/>
        <location line="+4"/>
        <location line="+621"/>
        <location line="+25"/>
        <location line="+20"/>
        <location line="+19"/>
        <location line="+10"/>
        <location line="+79"/>
        <location line="+6"/>
        <location line="+111"/>
        <location line="+846"/>
        <location line="+5"/>
        <location line="+4"/>
        <location line="+311"/>
        <location line="+28"/>
        <location line="+75"/>
        <location line="+109"/>
        <location line="+23"/>
        <location line="+130"/>
        <location line="+101"/>
        <location line="+7"/>
        <location line="+7"/>
        <location line="+7"/>
        <location line="+6"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location filename="../qucs/qucs.cpp" line="-2554"/>
        <source>Cannot open &quot;%1&quot;.</source>
        <translation>Nie można otworzyć &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+2269"/>
        <location line="+23"/>
        <source>Library is corrupt.</source>
        <translation>Biblioteka jest uszkodzona.</translation>
    </message>
    <message>
        <location filename="../qucs/qucs_actions.cpp" line="-921"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+35"/>
        <location line="+13"/>
        <location line="+736"/>
        <location filename="../qucs/qucs.cpp" line="-2039"/>
        <location line="+503"/>
        <location line="+73"/>
        <location line="+70"/>
        <location line="+11"/>
        <location line="+26"/>
        <location line="+254"/>
        <source>Info</source>
        <translation>Informacja</translation>
    </message>
    <message>
        <location filename="../qucs/qucs.cpp" line="-936"/>
        <source>Default icon not found:
 %1.png</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+276"/>
        <source>-port</source>
        <translation>-wrota</translation>
    </message>
    <message>
        <location line="+53"/>
        <source>Copying Qucs document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+721"/>
        <source>The document contains unsaved changes!
</source>
        <translation>Dokument zawiera niezapisane zmiany!
</translation>
    </message>
    <message>
        <location line="-720"/>
        <source>Do you want to save the changes before copying?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/qucs_init.cpp" line="+74"/>
        <source>&amp;Save</source>
        <translation>&amp;Zapisz</translation>
    </message>
    <message>
        <location filename="../qucs/qucs.cpp" line="+23"/>
        <source>Copy file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Enter new name:</source>
        <translation>Podaj mową nazwę:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Cannot rename an open file!</source>
        <translation>Nie mogę zmienić nazwy otwartego pliku !</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Rename file</source>
        <translation>Zmień nazwę pliku</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Cannot delete an open file!</source>
        <translation>Nie mogę usunąć otwartego pliku !</translation>
    </message>
    <message>
        <location line="-768"/>
        <location line="+773"/>
        <location line="+215"/>
        <location line="+274"/>
        <location line="+703"/>
        <location line="+544"/>
        <source>Warning</source>
        <translation>Ostrzeżenia</translation>
    </message>
    <message>
        <location line="-1735"/>
        <source>This will delete the file permanently! Continue ?</source>
        <translation>Ta operacja usunie bezpowrotnie plik! Czy chcesz kontynuować ?</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="vanished">Nie</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="vanished">Tak</translation>
    </message>
    <message>
        <location line="-152"/>
        <source>unknown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Verilog source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Verilog-A source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>VHDL source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>data file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>data display</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>VHDL configuration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>configuration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-639"/>
        <source>Cannot create work directory !</source>
        <translation>Nie mogę stworzyć katalogu roboczego!</translation>
    </message>
    <message>
        <location line="+839"/>
        <source>Cannot create project directory !</source>
        <translation>Nie mogę utworzyć katalogu projektowego !</translation>
    </message>
    <message>
        <source>Cannot access project directory: </source>
        <translation type="obsolete">Brak dostępu do katalogu projektowego:</translation>
    </message>
    <message>
        <source> - Project: </source>
        <translation type="vanished">- Projekt:</translation>
    </message>
    <message>
        <location line="+56"/>
        <source>Choose Project Directory for Opening</source>
        <translation>Wybierz katalog projektowy do otwarcia</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>No project is selected !</source>
        <translation>Nie wybrano projektu !</translation>
    </message>
    <message>
        <location line="-134"/>
        <source>Cannot delete file: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-502"/>
        <location line="+112"/>
        <location line="+3"/>
        <location line="+98"/>
        <location line="+79"/>
        <source>Search results</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-662"/>
        <source>Search Lib Components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-257"/>
        <source>Set simulator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-14"/>
        <source>Ngspice found at: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+297"/>
        <source>Show model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+541"/>
        <source>verilog-a user devices</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+225"/>
        <source>Cannot copy file to identical name: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Cannot copy schematic: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Enter new filename:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Cannot rename file: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+109"/>
        <source>Cannot access project directory: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Project directory name does not end in &apos;_prj&apos;(%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Project: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+88"/>
        <source>Project directory name does not end in &apos;_prj&apos; (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Cannot delete an open project !</source>
        <translation>Nie mogę usunąć otwartego projektu !</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>This will destroy all the project files permanently ! Continue ?</source>
        <translation>Ta operacja usunie wszystkie pliki projektu ! Czy chcesz kontynuować ?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="vanished">&amp;Tak</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="vanished">&amp;Nie</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Cannot remove project directory!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Choose Project Directory for Deleting</source>
        <translation>Wybierz katalog projektowy do usunięcia</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>No project is selected!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <location line="+12"/>
        <source>Creating new schematic...</source>
        <translation>Tworzenie nowego schematu...</translation>
    </message>
    <message>
        <location filename="../qucs/qucs_init.cpp" line="+901"/>
        <location filename="../qucs/qucs_actions.cpp" line="-1053"/>
        <location line="+15"/>
        <location line="+364"/>
        <location line="+388"/>
        <location filename="../qucs/qucs.cpp" line="-5"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+87"/>
        <location line="+37"/>
        <location line="+5"/>
        <location line="+114"/>
        <location line="+5"/>
        <location line="+35"/>
        <location line="+57"/>
        <location line="+42"/>
        <location line="+215"/>
        <location line="+30"/>
        <source>Ready.</source>
        <translation>Gotowy.</translation>
    </message>
    <message>
        <location filename="../qucs/qucs.cpp" line="-633"/>
        <source>Creating new text editor...</source>
        <translation>Tworzenie nowego tekstu...</translation>
    </message>
    <message>
        <location filename="../qucs/qucs_actions.cpp" line="-397"/>
        <location filename="../qucs/qucs.cpp" line="+80"/>
        <source>Opening file...</source>
        <translation>Otwieranie pliku...</translation>
    </message>
    <message>
        <location filename="../qucs/qucs.cpp" line="+2"/>
        <source>Enter a Schematic Name</source>
        <translation>Podaj nazwę schematu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Opening aborted</source>
        <translation>Otwieranie przerwane</translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Saving file...</source>
        <translation>Zapisywanie pliku...</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+119"/>
        <source>Saving aborted</source>
        <translation>Zapisywanie przerwane</translation>
    </message>
    <message>
        <location line="-78"/>
        <source>Qucs Netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>SPICE Netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Plain Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Subcircuit symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Enter a Document Name</source>
        <translation>Podaj nazwę dokumentu</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>The file &apos;</source>
        <translation>Plik &apos;</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>&apos; already exists!
</source>
        <translation>&apos; już istnieje!
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Saving will overwrite the old one! Continue?</source>
        <translation>Zapisanie spowoduje utratę poprzedniej zawartosci! Kontynuować?</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="vanished">Porzuć</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Cannot overwrite an open document</source>
        <translation>Nie mogę nadpisać otwartego projektu</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Saving file under new filename...</source>
        <translation>Zapisywanie pliku pod inną nazwą...</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Saving all files...</source>
        <translation>Zapisywanie wszystkich plików...</translation>
    </message>
    <message>
        <location line="+53"/>
        <source>Closing file...</source>
        <translation>Zamykanie pliku...</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Closing Qucs document</source>
        <translation>Zamykanie dokumentu programu Qucs</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Do you want to save the changes before closing?</source>
        <translation>Czy chcesz zapisać zmiany przed zakończeniem?</translation>
    </message>
    <message>
        <source>&amp;Discard</source>
        <translation type="vanished">&amp;Zaniechaj</translation>
    </message>
    <message>
        <location line="+238"/>
        <source>untitled</source>
        <translation type="unfinished">bez nazwy</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Printing...</source>
        <translation>Drukowanie...</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Exiting application...</source>
        <translation>Opuszczanie aplikacji...</translation>
    </message>
    <message>
        <location line="+135"/>
        <source>No simulations found. Tuning not possible. Please add at least one simulation.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Tuning not possible for digital simulation. Only analog simulation supported.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Tuning has no effect without diagrams. Add at least one diagram on schematic.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+677"/>
        <source>Symbol editing supported only for schematics and Verilog-A documents!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Attaching symbols to Verilog-A sources is deprecated and not recommended for new designs. Use SPICE generic device instead. See the documentation for more details.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+362"/>
        <source>Schematic not saved! Simulation of unsaved schematic not possible. Save schematic first!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Simulation of text document is not possible!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>This action is supported only for SPICE simulators!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+59"/>
        <source>Save Verilog-A module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Build Verilog-A module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This schematic is not a subcircuit!
Use subcircuit to crete Verilog-A module!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Quit...</source>
        <translation type="vanished">Koniec...</translation>
    </message>
    <message>
        <source>Do you really want to quit?</source>
        <translation type="vanished">Czy rzeczywiście chcesz zakończyć?</translation>
    </message>
    <message>
        <location line="-1004"/>
        <source>The document was modified by another program !</source>
        <translation>Dokument został zmodyfikowany przez inny program !</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Do you want to reload or keep this version ?</source>
        <translation>Odświeżyć czy pozostawić obecną wersję ?</translation>
    </message>
    <message>
        <source>Reload</source>
        <translation type="vanished">Odśwież</translation>
    </message>
    <message>
        <source>Keep it</source>
        <translation type="vanished">Pozostaw</translation>
    </message>
    <message>
        <location line="+173"/>
        <source>Cannot create </source>
        <translation>Nie można utworzyć</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>No page set !</source>
        <translation>Nie ustawiono strony !</translation>
    </message>
    <message>
        <location line="+76"/>
        <source>Cannot start &quot;%1&quot;!</source>
        <translation>Nie można uruchomić &quot;%1&quot;!</translation>
    </message>
    <message>
        <location line="+362"/>
        <source>Could not load S[1,1].</source>
        <translation>Nie można załadować S[1,1].</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Could not load S[1,2].</source>
        <translation>Nie można załadować S[1,2].</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Could not load S[2,1].</source>
        <translation>Nie można załadować S[2,1].</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Could not load S[2,2].</source>
        <translation>Nie można załadować S[2,2].</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Wrong dependency!</source>
        <translation>Zła zależność!</translation>
    </message>
    <message>
        <location filename="../qucs/qucs_actions.cpp" line="-380"/>
        <source>Cutting selection...</source>
        <translation>Wycinanie zaznaczenia...</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Copying selection to clipboard...</source>
        <translation>Kopiowanie zaznaczenia do schowka...</translation>
    </message>
    <message>
        <location line="+225"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+35"/>
        <location line="+13"/>
        <source>At least two elements must be selected !</source>
        <translation>Przynajmniej dwa elementy muszą być wybrane !</translation>
    </message>
    <message>
        <location line="+57"/>
        <source>Opening aborted, file not found.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+46"/>
        <source>Cannot start text editor! 

%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Show netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Not a schematic tab!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+123"/>
        <source>Cannot start %1 program! 

(%2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Layouting of display pages is not supported!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Cannot write netlist!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Digital schematic not supported!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Layouting of text documents is not supported!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Cannot start Qucs-RFLayout: 
%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+58"/>
        <source>No project open!</source>
        <translation>Nie otwarto projektu!</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Select files to copy</source>
        <translation>wybierz plik do skopiowania</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>No files copied.</source>
        <translation>Nie skopiowano żadnego pliku.</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Cannot open &quot;%1&quot; !</source>
        <translation>Nie można otworzyć &quot;%1&quot; !</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Overwrite</source>
        <translation>Nadpisać</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>File &quot;%1&quot; already exists.
Overwrite ?</source>
        <translation>Plik &quot;%1&quot; już istnieje.
Nadpisać ?</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Cannot create &quot;%1&quot; !</source>
        <translation>Nie można stworzyć &quot;%1&quot; !</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Cannot read &quot;%1&quot; !</source>
        <translation>Nie można otworzyć &quot;%1&quot; !</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Cannot write &quot;%1&quot; !</source>
        <translation>Nie można pisać do &quot;%1&quot; !</translation>
    </message>
    <message>
        <location line="+225"/>
        <source>Please open project with subcircuits!</source>
        <translation>Proszę otworzyć projekt z podukładami!</translation>
    </message>
    <message>
        <source>Please open project first!</source>
        <translation type="vanished">Proszę najpierw otworzyć projekt!</translation>
    </message>
    <message>
        <location line="+51"/>
        <source>Please select a diagram graph!</source>
        <translation>Proszę wybrać wykres!</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Enter an Output File Name</source>
        <translation>Podaj nazwę pliku wyjściowego</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>CSV file</source>
        <translation>plik CSV</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Output file already exists!</source>
        <translation>Plik wyjściowy już istnieje!</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Overwrite it?</source>
        <translation>Nadpisać?</translation>
    </message>
    <message>
        <location line="+98"/>
        <source>Symbol files not found in: %1

Is the project open?
Have you saved the Verilog-A symbols?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+92"/>
        <source>admsXml</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Compiler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>admsXml Dock</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+107"/>
        <source>OpenVAF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>OpenVAF Dock</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/qucs_init.cpp" line="-926"/>
        <source>&amp;New</source>
        <translation>&amp;Nowy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Creates a new document</source>
        <translation>Tworzy nowy dokument</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>New

Creates a new schematic or data display document</source>
        <translation>Nowy

Tworzy nowy schemat lub prezentację wyników</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>New &amp;Text</source>
        <translation>Nowy &amp;Tekst</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Creates a new text document</source>
        <translation>Tworzy nowy dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>New Text

Creates a new text document</source>
        <translation>Nowy tekst

Tworzy nowy dokument</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>&amp;Open...</source>
        <translation>&amp;Otwórz...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Opens an existing document</source>
        <translation>Otwiera istniejący dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Open File

Opens an existing document</source>
        <translation>Otwórz plik

otwiera istniejący dokument</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Saves the current document</source>
        <translation>Zapisuje bieżący dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Save File

Saves the current document</source>
        <translation>Zapisz plik

Zapisuje bieżący dokument</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Save as...</source>
        <translation>Zapisz jako...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Saves the current document under a new filename</source>
        <translation>Zapisuje bieżący dokument pod nową nazwą</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Save As

Saves the current document under a new filename</source>
        <translation>Zapisz jako

Zapisuje bieżący dokument pod inną nazwą</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Save &amp;All</source>
        <translation>Zapisz &amp;wszystko</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Saves all open documents</source>
        <translation>Zapisz otwarte dokumenty</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Save All Files

Saves all open documents</source>
        <translation>Zapisz wszystkie pliki

Zapisuje wszystkie otwarte dokumenty</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Close</source>
        <translation>&amp;Zamknij</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Closes the current document</source>
        <translation>Zamyka bieżący dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Close File

Closes the current document</source>
        <translation>Zamknij plik

Zamyka bieżący dokument</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Clear Recent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Examples</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&amp;Edit Circuit Symbol</source>
        <translation>&amp;Edytuj symbol układu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Edits the symbol for this schematic</source>
        <translation>Edytuj symbol dla tego schematu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Edit Circuit Symbol

Edits the symbol for this schematic</source>
        <translation>Edytuj Symbol Układu

Edytuj szmbol dla tego schematu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Document Settings...</source>
        <translation>Ustawienia &amp;dokumentu...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Document Settings</source>
        <translation>Ustawienia dokumentu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Settings

Sets properties of the file</source>
        <translation>Ustawienia

Ustawienia właściwości pliku</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Print...</source>
        <translation>&amp;Drukuj...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Prints the current document</source>
        <translation>Drukuj bieżący dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Print File

Prints the current document</source>
        <translation>Drukuj plik

Drukuje bieżący dokument</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Print Fit to Page...</source>
        <translation>Drukuj dopasowując do wielkości strony...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+P</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Print Fit to Page</source>
        <translation>Dopasuj do strony</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Print Fit to Page

Print and fit content to the page size</source>
        <translation>Drukuj dopasowując do wielkości strony

Drukuj dopasowując do wielkości strony</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>E&amp;xit</source>
        <translation>Wy&amp;jście</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Quits the application</source>
        <translation>Zakończenie aplikacji</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Exit

Quits the application</source>
        <translation>Wyjście

Zakończenie aplikacji</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Application Settings...</source>
        <translation>Ustawienia programu...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+,</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Application Settings</source>
        <translation>Ustawienia programu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Qucs Settings

Sets properties of the application</source>
        <translation>Ustawienia Qucs&apos;a

Ustawiemnia programu Qucs</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Refresh Search Path...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Refresh Search Path</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Refresh Path

Rechecks the list of paths for subcircuit files.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Align top</source>
        <translation>Wyrównaj górne krawędzie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+T</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align top selected elements</source>
        <translation>Wyrównaj górne krawędzie wybranych elementów</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Align top

Align selected elements to their upper edge</source>
        <translation>Wyrównaj górne krawędzie

Wyrównaj górne krawędzie wybranych elementów</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Align bottom</source>
        <translation>Wyrównaj dolne krawędzie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align bottom selected elements</source>
        <translation>Wyrównaj dolne krawędzie wybranych elementów</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align bottom

Align selected elements to their lower edge</source>
        <translation>Wyrównaj dolne krawędzie

Wyrównaj dolne krawędzie wybranych elementów</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Align left</source>
        <translation>Wyrównaj lewe krawędzie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align left selected elements</source>
        <translation>Wyrównaj lewe krawędzie wybranych elementów</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align left

Align selected elements to their left edge</source>
        <translation>Wyrównaj lewe krawędzie

Wyrównaj lewe krawędzie wybranych elementów</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Align right</source>
        <translation>Wyrównaj prawe krawędzie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align right selected elements</source>
        <translation>Wyrównaj prawe krawędzie wybranych elementów</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align right

Align selected elements to their right edge</source>
        <translation>Wyrównaj prawe krawędzie

Wyrównaj prawe krawędzie wybranych elementów</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Distribute horizontally</source>
        <translation>Rozmieść w poziomie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Distribute equally horizontally</source>
        <translation>Rozmieść równomiernie w poziomie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Distribute horizontally

Distribute horizontally selected elements</source>
        <translation>Rozmieść w poziomie

Rozmieść równomiernie w poziomie</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Distribute vertically</source>
        <translation>Rozmieść w pionie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Distribute equally vertically</source>
        <translation>Rozmieść równomiernie w pionie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Distribute vertically

Distribute vertically selected elements</source>
        <translation>Rozmieść w pionie

Rozmieść równomiernie w pionie</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Center horizontally</source>
        <translation>Wyśrodkuj w poziomie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Center horizontally selected elements</source>
        <translation>wyśrodkowuje w poziomie wybrane elementy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Center horizontally

Center horizontally selected elements</source>
        <translation>Wyśrodkuj w poziomie

wyśrodkowuje w poziomie wybrane elementy</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Center vertically</source>
        <translation>Wyśrodkuj w pionie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Center vertically selected elements</source>
        <translation>wyśrodkowuje w pionie wybrane elementy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Center vertically

Center vertically selected elements</source>
        <translation>Wyśrodkuj w pionie

wyśrodkowuje w pionie wybrane elementy</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Set on Grid</source>
        <translation>Przyciągnij do siatki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+U</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Sets selected elements on grid</source>
        <translation>Przyciagnij wybrane elementy do siatki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Set on Grid

Sets selected elements on grid</source>
        <translation>Przyciągnij do siatki

Przyciągnij wybrane elementy do siatki</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Move Component Text</source>
        <translation>Przesuń tekst elementu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Moves the property text of components</source>
        <translation>Przesuwa tekst właściwości elementu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Move Component Text

Moves the property text of components</source>
        <translation>Przesuń Tekst Elementu

Przesuwa tekst właściwości elementu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Replace...</source>
        <translation>Zamień...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Replace component properties or VHDL code</source>
        <translation>Zmienia właściwości elementu lub kodu VHDL</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Replace

Change component properties
or
text in VHDL code</source>
        <translation>Zamień

zmienia właściwości elementu
lub
tekstu w kodzie VHDL</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cu&amp;t</source>
        <translation>Wy&amp;tnij</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+X</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cuts out the selection and puts it into the clipboard</source>
        <translation>Wytnij zaznaczenie i wstaw do schowka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cut

Cuts out the selection and puts it into the clipboard</source>
        <translation>Wytnij

Wycina zaznaczenie i wstawia do schowka</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Copy</source>
        <translation>&amp;Kopiuj</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Copies the selection into the clipboard</source>
        <translation>Kopiuje zaznacone elementy do schowka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copy

Copies the selection into the clipboard</source>
        <translation>Kopiuj

Kopiuje zaznacone elementy do schowka</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Paste</source>
        <translation>&amp;Wklej</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Pastes the clipboard contents to the cursor position</source>
        <translation>Wkleja zawartość schowka na poyzcję wskazaną przez kursor</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Paste

Pastes the clipboard contents to the cursor position</source>
        <translation>Wklej

Wkleja zawartość schowka na poyzcję wskazaną przez kursor</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;Delete</source>
        <translation>&amp;Usuń</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Deletes the selected components</source>
        <translation>Usuwa zaznaczone elementy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Delete

Deletes the selected components</source>
        <translation>Usuń

Usuwa zaznaczone elementy</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Find...</source>
        <translation>Znajdź...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Find a piece of text</source>
        <translation>Znajdź fragment tekstu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Find

Searches for a piece of text</source>
        <translation>Znajdź

Znajdź fragment tekstu
</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Export as image...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Exports the current document to an image file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Export as image

Exports the current document to an image file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>&amp;Undo</source>
        <translation>Co&amp;fnij</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Undoes the last command</source>
        <translation>Cofa ostatnio wykonaną operację</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Undo

Makes the last action undone</source>
        <translation>Cofnij

Cofa ostatnio wykonaną operację</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Redo</source>
        <translation>Po&amp;nów</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Redoes the last command</source>
        <translation>Ponawia ostatnio wykonaną operację</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Redo

Repeats the last action once more</source>
        <translation>Ponów

Ponawia ostatnio wykonaną operację</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;New Project...</source>
        <translation>&amp;Nowy projekt...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+N</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Creates a new project</source>
        <translation>Tworzy nowy projekt</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>New Project

Creates a new project</source>
        <translation>Nowy projekt

Tworzy nowy projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Open Project...</source>
        <translation>&amp;Otwórz projekt...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+O</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Opens an existing project</source>
        <translation>Otwiera istniejący projekt</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Open Project

Opens an existing project</source>
        <translation>Otwórz projekt

Otwiera istniejący projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Delete Project...</source>
        <translation>U&amp;suń projekt...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+D</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Deletes an existing project</source>
        <translation>Usuwa istniejący projekt</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Delete Project

Deletes an existing project</source>
        <translation>Usuń projekt

Usuwa projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Close Project</source>
        <translation>&amp;Zamknij Projekt</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Closes the current project</source>
        <translation>Zamyka bieżący projekt</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Close Project

Closes the current project</source>
        <translation>Zamknij Projekt

Zamyka aktualny projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Add Files to Project...</source>
        <translation>Dod&amp;aj pliki do projektu...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copies files to project directory</source>
        <translation>Kopiuj pliki do katalogu projektowego</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Add Files to Project

Copies files to project directory</source>
        <translation>Dodaj pliki do projektu

Kopiuje pliki do katalogu projektowego</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Create &amp;Library...</source>
        <translation>Tworzy bib&amp;liotekę...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+L</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Create Library from Subcircuits</source>
        <translation>Tworzenie biblioteki z podukładów</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Create Library

Create Library from Subcircuits</source>
        <translation>Stwórz bibliotekę

tworzenie biblioteki z podukładów</translation>
    </message>
    <message>
        <location line="+198"/>
        <source>S-parameter Viewer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Starts S-parameter viewer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>S-parameter Viewer

Starts S-parameter viewer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+112"/>
        <source>&amp;About Qucs-S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&amp;About Qt</source>
        <translation type="unfinished">&amp;O QT</translation>
    </message>
    <message>
        <source>Create &amp;Package...</source>
        <translation type="vanished">Utwórz &amp;paczkę...</translation>
    </message>
    <message>
        <source>Create compressed Package from Projects</source>
        <translation type="vanished">Tworzy skompresowaną paczkę z projektów</translation>
    </message>
    <message>
        <source>Create Package

Create compressed Package from complete Projects</source>
        <translation type="vanished">Utwórz paczkę

Tworzy skompresowaną paczkę z projektów</translation>
    </message>
    <message>
        <source>E&amp;xtract Package...</source>
        <translation type="vanished">&amp;Rozpakuj paczkę...</translation>
    </message>
    <message>
        <source>Install Content of a Package</source>
        <translation type="vanished">Zainstaluj zawartość paczki</translation>
    </message>
    <message>
        <source>Extract Package

Install Content of a Package</source>
        <translation type="vanished">Rozpakuj paczkę

instaluje zawartość paczki</translation>
    </message>
    <message>
        <location line="-112"/>
        <source>Convert data file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Import/Export Data

Convert data file to various file formats</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-203"/>
        <source>Export to &amp;CSV...</source>
        <translation>Exportuj do &amp;CSV...</translation>
    </message>
    <message>
        <location line="-276"/>
        <source>New symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Creates a new symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>New

Creates a new schematic symbol document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+44"/>
        <source>Starts file chooser dialog to open one of example schematics</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Examples

Start file chooser dialog and open one of example schematics</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+229"/>
        <source>Ctrl+Shift+C</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Convert graph data to CSV file</source>
        <translation>Konwertuj dane wykresu do formatu CSV</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Export to CSV

Convert graph data to CSV file</source>
        <translation>Exportuj do CSV

Konwertuje dane wykresu do formatu CSV</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Build Verilog-A module...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Run admsXml and C++ compiler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Build Verilog-A module
Runs amdsXml and C++ compiler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Load Verilog-A module...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Select Verilog-A symbols to be loaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Load Verilog-A module
Let the user select and load symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>View All</source>
        <translation>Pokaż wszystko</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Show the whole page</source>
        <translation>Pokaż całą stronę</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>View All

Shows the whole page content</source>
        <translation>Pokaż wszystko

Pokazuje zawartość całej strony</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Zoom to selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Z</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Zoom to selected components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Zoom to selection

Zoom to selected components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>View 1:1</source>
        <translation>Podgląd w skali 1:1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Views without magnification</source>
        <translation>Podgląd bez powiększenia</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>View 1:1

Shows the page content without magnification</source>
        <translation>Podgląd w skali 1:1

Pokazuje zawartość strony bez powiększenia</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Zoom in</source>
        <translation>Powiększ</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Zooms into the current view</source>
        <translation>Powiększenie zawartości bieżącego okna</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Zoom in

Zooms the current view</source>
        <translation>Powiększ

Powiększenie zawartości bieżącego okna</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Zoom out</source>
        <translation>Zmniejsz</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Zooms out the current view</source>
        <translation>Zmniejszenie zawartości bieżącego okna</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Zoom out

Zooms out the current view</source>
        <translation>Zmniejsz

Zmniejszenie podglądu zawartości bieżącego okna</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Select</source>
        <translation>Zaznacz</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Activate select mode</source>
        <translation>Uaktywnij tryb wyboru</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Select

Activates select mode</source>
        <translation>Wybierz

Uaktywnia tryb wyboru</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Select All</source>
        <translation>Zaznacz wszystko</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Selects all elements</source>
        <translation>Zaznacz wszystkie elementy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Select All

Selects all elements of the document</source>
        <translation>Zaznacz wszystko

Zaznacz wszystkie elementy w dokumencie</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Select Markers</source>
        <translation>Zaznacz znaczniki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+M</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Selects all markers</source>
        <translation>Zaznacz wsyzstkie znaczniki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Select Markers

Selects all diagram markers of the document</source>
        <translation>Zaznacz znaczniki

zaznacza wsyztkie ynaczniki w dokumencie</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Rotate</source>
        <translation>Obróć</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+R</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Rotates the selected component by 90�</source>
        <translation type="unfinished">Obraca wybrany elelement o 90 stopni {90�?}</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Rotate

Rotates the selected component by 90� counter-clockwise</source>
        <translation type="unfinished">Obróć

Obraca wybrany elelement o 90 stopni zgodnie z ruchem wskazówek zegara {90�?}</translation>
    </message>
    <message>
        <location line="+60"/>
        <source>Ctrl+W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+56"/>
        <source>Power combining</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+7</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Starts QucsPowerCombining</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+17"/>
        <source>Power combining

Starts power combining calculation program</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-9"/>
        <source>Data files converter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+8</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>RF Layout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+9</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Starts Qucs-RFLayout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <source>View Data Display/Schematic

Changes to data display or schematic page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Set Diagram Limits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Pick the diagram limits using the mouse. Right click for default.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Set Diagram Limits

Pick the diagram limits using the mouse. Right click for default.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Reset Diagram Limits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Shift+E</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Resets the limits for all axis to auto.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Reset Diagram Limits

Resets the limits for all axis to auto.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Simulators Settings...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Rotates the selected component by 90°</source>
        <translation type="vanished">Obraca wybrany elelement o 90 stopni</translation>
    </message>
    <message>
        <source>Rotate

Rotates the selected component by 90° counter-clockwise</source>
        <translation type="vanished">Obróć

Obraca wybrany elelement o 90 stopni zgodnie z ruchem wskazówek zegara</translation>
    </message>
    <message>
        <location line="-197"/>
        <source>Mirror about X Axis</source>
        <translation>Odbicie wzdłuż osi X</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+J</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Mirrors the selected item about X Axis</source>
        <translation>Odbicie lustrzane zaznaczonych elementów względem osi X</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Mirror about X Axis

Mirrors the selected item about X Axis</source>
        <translation>Odbicie wzdłuż osi X

Odbija lustrzanie wzbrany element wzdłuż osi X</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Mirror about Y Axis</source>
        <translation>Odbicie wzdłuż osi Y</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+M</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Mirrors the selected item about Y Axis</source>
        <translation>Odbicie lustrzane zaznaczonych elementów względem osi Y</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Mirror about Y Axis

Mirrors the selected item about Y Axis</source>
        <translation>Odbicie wzdłuż osi Y

Odbija lustrzanie wzbrany element wzdłuż osi Y</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Go into Subcircuit</source>
        <translation>Poziom niżej (do podukładu)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+I</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Goes inside the selected subcircuit</source>
        <translation>Wejście wgłąb zaznaczonego podukładu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Go into Subcircuit

Goes inside the selected subcircuit</source>
        <translation>Poziom niżej

Zejście o jeden poziom hiearchi niżej do zaznaczonego elementu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Pop out</source>
        <translation>Poziom wyżej</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+H</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Pop outside subcircuit</source>
        <translation>Wyjście z podukładu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Pop out

Goes up one hierarchy level, i.e. leaves subcircuit</source>
        <translation>Poziom wyżej


Wejście o jeden poziom hiearchi wyżej, opuszczenie podukładu </translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Deactivate/Activate</source>
        <translation>Dezaktywuj/Uaktywnij</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+D</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Deactivate/Activate selected components</source>
        <translation>Dezaktuwuj/Uaktywnij wybrane elementy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Deactivate/Activate

Deactivate/Activate the selected components</source>
        <translation>Aktywuj/Dezaktywuj

auaktywnia/dezaktywuje wybrane elementy</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Insert Equation</source>
        <translation>Wstaw równanie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+&lt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts an equation</source>
        <translation>Wstawia równanie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Insert Equation

Inserts a user defined equation</source>
        <translation>Wstaw równanie

Wstawia równanie zdefiniowane przez użytkownika</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Insert Ground</source>
        <translation>Wstaw masę</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+G</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts a ground symbol</source>
        <translation>Wstawia symbol masy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Insert Ground

Inserts a ground symbol</source>
        <translation>Wstaw masę

Wstawia symbol masy</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Insert Port</source>
        <translation>Wstaw port</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts a port symbol</source>
        <translation>Wstawia symbol portu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Insert Port

Inserts a port symbol</source>
        <translation>Wstaw port

Wstawia symbol portu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Wire</source>
        <translation>Drut</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Inserts a wire</source>
        <translation>Wstaw drut</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Wire

Inserts a wire</source>
        <translation>Drut

Wstaw drut</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Wire Label</source>
        <translation>Nazwa drutu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+L</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts a wire or pin label</source>
        <translation>Wstawia nazwę drutu lub końcówki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Wire Label

Inserts a wire or pin label</source>
        <translation>Nazwa drutu

Wstawia nazwę drutu lub końcówki</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>VHDL entity</source>
        <translation>VHDL entity</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts skeleton of VHDL entity</source>
        <translation>wstaw szkielet VHDL entity</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>VHDL entity

Inserts the skeleton of a VHDL entity</source>
        <translation>VHDL entity

wstawia szkielet VHDL entity</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Text Editor</source>
        <translation>Edytor tekstu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Starts the Qucs text editor</source>
        <translation>Uruchamia edytor tekstowy programu Qucs</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Text editor

Starts the Qucs text editor</source>
        <translation>Edytor tekstowy

Uruchamia edytor tekstowy programu Qucs</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Filter synthesis</source>
        <translation>Synteza filtrów</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Starts QucsFilter</source>
        <translation>Uruchamia program QucsFilter</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Filter synthesis

Starts QucsFilter</source>
        <translation>Synteza filtra

Urochomienie progranu QucsFilter</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Active filter synthesis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Starts QucsActiveFilter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Active filter synthesis

Starts QucsActiveFilter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Line calculation</source>
        <translation>Kalkulator linii</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Starts QucsTrans</source>
        <translation>Uruchamia QucsTrans</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Line calculation

Starts transmission line calculator</source>
        <translation>Kalkulator linii

Uruchamia kalkulator linii transmisyjnych</translation>
    </message>
    <message>
        <source>Component Library</source>
        <translation type="vanished">Biblioteka elementów</translation>
    </message>
    <message>
        <source>Starts QucsLib</source>
        <translation type="vanished">Uruchom QucsLib</translation>
    </message>
    <message>
        <source>Component Library

Starts component library program</source>
        <translation type="vanished">Biblioteka elementów

Uruchomia program biblioteki elementów</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Matching Circuit</source>
        <translation>Układ dopasowujący</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+5</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Creates Matching Circuit</source>
        <translation>Tworzy układ dopasowujący</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Matching Circuit

Dialog for Creating Matching Circuit</source>
        <translation>Układ dopasowujący

Okno dialogowe tworzenia układu dopasowującego</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Attenuator synthesis</source>
        <translation>Synteza tłumików</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+6</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Starts QucsAttenuator</source>
        <translation>Uruchamia program QucsAttenuator</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Attenuator synthesis

Starts attenuator calculation program</source>
        <translation>Synteza tłumików

Uruchamia program syntezy tłumików</translation>
    </message>
    <message>
        <location line="+26"/>
        <location line="+396"/>
        <source>Simulate</source>
        <translation>Sumuluj</translation>
    </message>
    <message>
        <location line="-394"/>
        <source>Simulates the current schematic</source>
        <translation>Symuluje bieżący schemat</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Simulate

Simulates the current schematic</source>
        <translation>Symuluj

Symuluje bieżący schemat</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>View Data Display/Schematic</source>
        <translation>Podgląd prezentacji wyników / schematu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Changes to data display or schematic page</source>
        <translation>Przełącza pomiędzy prezentacją wyników a schematem</translation>
    </message>
    <message>
        <source>View Data Display/Schematic

</source>
        <translation type="vanished">Podgląd prezentacji wyników / schematu
</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Calculate DC bias</source>
        <translation>Oblicz punkt pracy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Calculates DC bias and shows it</source>
        <translation>Oblicza punkt pracy i wyświetla go</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Calculate DC bias

Calculates DC bias and shows it</source>
        <translation>Oblicz punkt pracy

Oblicza punkt pracy i wyświetla go</translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+1"/>
        <location filename="../qucs/qucs.cpp" line="+266"/>
        <source>Save netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Save netlist to file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Set Marker on Graph</source>
        <translation>Ustaw znacznik na wykresie</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Sets a marker on a diagram&apos;s graph</source>
        <translation>Ustawia znacznik na wykresie</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Set Marker

Sets a marker on a diagram&apos;s graph</source>
        <translation>Ustaw znacznik

Ustawia znacznik na wykresie</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Show Last Messages</source>
        <translation>Pokaż ostatnie komunikaty</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Shows last simulation messages</source>
        <translation>Pokazuje ostatnie komunikaty</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Show Last Messages

Shows the messages of the last simulation</source>
        <translation>Pokaż ostatnie komunikaty

Pokazuje ostatnie komunikaty</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Show Last Netlist</source>
        <translation>Pokaż ostatnią netlistę</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Shows last simulation netlist</source>
        <translation>Pokazuje ostatnią symulowaną netlistę</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Show Last Netlist

Shows the netlist of the last simulation</source>
        <translation>Pokaż ostatnią netlistę

Pokazuje ostatnią symulowaną netlistę</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Build Verilog-A module from subcircuit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tool&amp;bar</source>
        <translation type="vanished">Pase&amp;k narzędziowy</translation>
    </message>
    <message>
        <source>Enables/disables the toolbar</source>
        <translation type="vanished">Włącza/wyłącza pasek narzędziowy</translation>
    </message>
    <message>
        <source>Toolbar

Enables/disables the toolbar</source>
        <translation type="vanished">Pasek narzędziowy

Włącza/wyłącza pasek narzędziowy</translation>
    </message>
    <message>
        <source>&amp;Statusbar</source>
        <translation type="vanished">Pasek &amp;statusu</translation>
    </message>
    <message>
        <source>Enables/disables the statusbar</source>
        <translation type="vanished">Włącza/wyłącza pasek statusu</translation>
    </message>
    <message>
        <source>Statusbar

Enables/disables the statusbar</source>
        <translation type="vanished">Pasek statusu

Włącza/wyłącza pasek statusu</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&amp;Dock Window</source>
        <translation>Za&amp;dokuj okno</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Enables/disables the browse dock window</source>
        <translation>włącza/wyłącza wyświetlanie zadokowanego okna</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Browse Window

Enables/disables the browse dock window</source>
        <translation>Pokaż okno

włącza/wyłącza wyświetlanie zadokowanego okna</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Octave Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Shows/hides the Octave dock window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Octave Window

Shows/hides the Octave dock window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Help Index...</source>
        <translation>Indeks pomocy...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Index of Qucs Help</source>
        <translation>Indeks pomocy programu Qucs</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Help Index

Index of intern Qucs help</source>
        <translation>Indek pomocy

Indeks pomocy programu Qucs</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Getting Started...</source>
        <translation>Wprowadzenie...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Getting Started with Qucs</source>
        <translation>Wprowadzenie do programu Qucs</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Getting Started

Short introduction into Qucs</source>
        <translation>Wprowadzenie

Krótkie wprowadzenie do programu Qucs</translation>
    </message>
    <message>
        <source>&amp;About Qucs...</source>
        <translation type="vanished">&amp;O programie Qucs...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>About the application</source>
        <translation>O aplikacji</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>About

About the application</source>
        <translation>O programie

Informacje o programie</translation>
    </message>
    <message>
        <source>About Qt...</source>
        <translation type="vanished">O bibliotece QT...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>About Qt</source>
        <translation>O QT</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>About Qt

About Qt by Trolltech</source>
        <translation>O QT

O bibliotece QT firmy Trolltech</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&amp;File</source>
        <translation>&amp;Plik</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Open Recent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>&amp;Edit</source>
        <translation>&amp;Edycja</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>P&amp;ositioning</source>
        <translation>P&amp;ołożenie</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>&amp;Insert</source>
        <translation>&amp;Wstaw</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>&amp;Project</source>
        <translation>&amp;Projekt</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>&amp;Tools</source>
        <translation>&amp;Narzędzia</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Compact modelling</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&amp;Simulation</source>
        <translation>&amp;Symulacja</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>&amp;View</source>
        <translation>&amp;Widok</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>&amp;Help</source>
        <translation>&amp;Pomoc</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>&amp;Technical Papers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <location line="+20"/>
        <location line="+19"/>
        <source>Open </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-38"/>
        <location line="+20"/>
        <location line="+19"/>
        <source>

Open </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-28"/>
        <source>Technical &amp;Reports</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>T&amp;utorials</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+37"/>
        <source>File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Edit</source>
        <translation>Edycja</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Work</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+36"/>
        <location line="+43"/>
        <source>no warnings</source>
        <translation>brak ostrzeżeń</translation>
    </message>
    <message>
        <location line="-22"/>
        <source>Warnings in last simulation! Press F5</source>
        <translation>Ostrzeżenia podczas ostatniej symulacji! Wciśnij F5</translation>
    </message>
</context>
<context>
    <name>QucsAttenuator</name>
    <message>
        <location filename="../qucs-s-spar-viewer/qucsattenuator.cpp" line="+48"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+48"/>
        <source>&amp;File</source>
        <translation>&amp;Plik</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+2"/>
        <source>&amp;Quit</source>
        <translation>&amp;Wyjście</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+2"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+6"/>
        <location line="+2"/>
        <source>&amp;Help</source>
        <translation>&amp;Pomoc</translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+5"/>
        <source>&amp;About</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+7"/>
        <source>About Qt...</source>
        <translation>O bibliotece QT...</translation>
    </message>
    <message>
        <location line="+12"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+12"/>
        <source>Topology</source>
        <translation>Topologia</translation>
    </message>
    <message>
        <location line="+34"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+34"/>
        <source>Input</source>
        <translation>Wejście</translation>
    </message>
    <message>
        <location line="+11"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+9"/>
        <source>Attenuation:</source>
        <translation>Tłumienie:</translation>
    </message>
    <message>
        <location line="+39"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+37"/>
        <source>Pin:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+25"/>
        <source>Freq:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+39"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+39"/>
        <source>Put into Clipboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+76"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+76"/>
        <source>R4:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+92"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+92"/>
        <source>Copyright (C) 2024 by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>1</source>
        <translation type="vanished">1</translation>
    </message>
    <message>
        <location line="-262"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="-260"/>
        <source>dB</source>
        <translation>dB</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+3"/>
        <source>Zin:</source>
        <translation>Zin:</translation>
    </message>
    <message>
        <source>50</source>
        <translation type="vanished">50</translation>
    </message>
    <message>
        <source>Ohm</source>
        <translation type="vanished">Ohm</translation>
    </message>
    <message>
        <location line="+14"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+13"/>
        <source>Zout:</source>
        <translation>Zout:</translation>
    </message>
    <message>
        <source>Calculate and put into Clipboard</source>
        <translation type="vanished">Policz i umieść w schowku</translation>
    </message>
    <message>
        <location line="+82"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+81"/>
        <source>Output</source>
        <translation>Wyjście</translation>
    </message>
    <message>
        <location line="+11"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+11"/>
        <source>R1:</source>
        <translation>R1:</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+7"/>
        <location line="+13"/>
        <location line="+7"/>
        <location line="+13"/>
        <location line="+7"/>
        <location line="+13"/>
        <location line="+7"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+2"/>
        <location line="+7"/>
        <location line="+13"/>
        <location line="+7"/>
        <location line="+13"/>
        <location line="+7"/>
        <location line="+13"/>
        <location line="+7"/>
        <source>--</source>
        <translation>-</translation>
    </message>
    <message>
        <location line="-49"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="-49"/>
        <source>R2:</source>
        <translation>R2:</translation>
    </message>
    <message>
        <location line="+20"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+20"/>
        <source>R3:</source>
        <translation>R3:</translation>
    </message>
    <message>
        <source>Result:</source>
        <translation type="vanished">Wynik:</translation>
    </message>
    <message>
        <location line="+85"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+85"/>
        <source>Qucs Attenuator Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+1"/>
        <source>QucsAttenuator is an attenuator synthesis program. To create a attenuator, simply enter all the input parameters and press the calculation button. Immediately, the schematic of the attenuator is calculated and put into the clipboard. Now go to Qucs, open an schematic and press CTRL-V (paste from clipboard). The attenuator schematic can now be inserted. Have lots of fun!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+14"/>
        <source>About Qt</source>
        <translation>O QT</translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+5"/>
        <source>About...</source>
        <translation>O...</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+2"/>
        <source>
Attenuator synthesis program
</source>
        <translation>
Program syntezy tłumików
</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+2"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+1"/>
        <location line="+2"/>
        <source>Copyright (C) 2006 by</source>
        <translation>Copyright (C) 2006 by</translation>
    </message>
    <message>
        <source>Success!</source>
        <translation type="vanished">Sukces!</translation>
    </message>
    <message>
        <location line="+316"/>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+321"/>
        <source>Error: Set Attenuation less than %1 dB</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QucsEdit</name>
    <message>
        <source>File: </source>
        <translation type="vanished">Plik: </translation>
    </message>
    <message>
        <source>Line: %1  -  Column: %2</source>
        <translation type="vanished">Linia: %1  -  Kolumna: %2</translation>
    </message>
    <message>
        <source>About</source>
        <translation type="vanished">O programie</translation>
    </message>
    <message>
        <source>Quit</source>
        <translation type="vanished">Wyjście</translation>
    </message>
    <message>
        <source>About...</source>
        <translation type="vanished">O...</translation>
    </message>
    <message>
        <source>
Very simple text editor for Qucs
</source>
        <translation type="vanished">
Bardzo prosty edytor tekstowy programu Qucs
</translation>
    </message>
    <message>
        <source>Copyright (C) 2004, 2005 by Michael Margraf
</source>
        <translation type="vanished">Copyright (C) 2004, 2005 by Michael Margraf
</translation>
    </message>
    <message>
        <source>Enter a Filename</source>
        <translation type="vanished">Podaj nazwę pliku</translation>
    </message>
    <message>
        <source>Enter a Document Name</source>
        <translation type="vanished">Podaj nazwę dokumentu</translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="vanished">Błąd</translation>
    </message>
    <message>
        <source>Cannot write file: </source>
        <translation type="vanished">Nie można pisać do pliku:</translation>
    </message>
    <message>
        <source>Cannot read file: </source>
        <translation type="vanished">Nie można czytać z pliku:</translation>
    </message>
    <message>
        <source>Closing document</source>
        <translation type="vanished">Zamykanie pliku</translation>
    </message>
    <message>
        <source>The text contains unsaved changes!
</source>
        <translation type="vanished">Tekst zawiera niezapisane zmiany!

</translation>
    </message>
    <message>
        <source>Do you want to save the changes?</source>
        <translation type="vanished">Czy chcesz zapisać zmiany?</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation type="vanished">&amp;Zapisz</translation>
    </message>
    <message>
        <source>&amp;Discard</source>
        <translation type="vanished">&amp;Zaniechaj</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="vanished">&amp;Porzuć</translation>
    </message>
</context>
<context>
    <name>QucsFilter</name>
    <message>
        <location filename="../qucs-filter/qucsfilter.cpp" line="+55"/>
        <source>&amp;File</source>
        <translation>&amp;Plik</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>E&amp;xit</source>
        <translation>Wy&amp;jście</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>&amp;Help</source>
        <translation>&amp;Pomoc</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Help...</source>
        <translation>Pomoc...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;About QucsFilter...</source>
        <translation>&amp;O programie QucsFilter...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>About Qt...</source>
        <translation>O bibliotece QT...</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Realization:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Filter type:</source>
        <translation>Typ filtra:</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Filter class:</source>
        <translation>Klasa filtra:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Low pass</source>
        <translation>Dolnoprzepustowy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>High pass</source>
        <translation>Górnoprzepustowy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Band pass</source>
        <translation>Pasmowoprzepustowy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Band stop</source>
        <translation>Pasmowozaporowy</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Order:</source>
        <translation>Rząd:</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+410"/>
        <source>Corner frequency:</source>
        <translation>Częstotliwość graniczna:</translation>
    </message>
    <message>
        <location line="-397"/>
        <source>Stop frequency:</source>
        <translation>Częstotliwość końcowa:</translation>
    </message>
    <message>
        <location line="+13"/>
        <location line="+395"/>
        <source>Stop band frequency:</source>
        <translation>Częstotliwość graniczna poza pasmem przepustowym:</translation>
    </message>
    <message>
        <location line="-382"/>
        <location line="+383"/>
        <source>Pass band ripple:</source>
        <translation>Zafalowania w paśmie przepustowym:</translation>
    </message>
    <message>
        <location line="-375"/>
        <source>Stop band attenuation:</source>
        <translation>Tłumienie poza pasmem przepustowym:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Impedance:</source>
        <translation>Impedancja:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Microstrip Substrate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Relative permittivity:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Substrate height:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>metal thickness:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>minimum width:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>maximum width:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Calculate and put into Clipboard</source>
        <translation>Policz i umieść w schowku</translation>
    </message>
    <message>
        <location line="+41"/>
        <source>About...</source>
        <translation>O...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>
Filter synthesis program
</source>
        <translation>
Program syntezy filtrów
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2005, 2006 by</source>
        <translation>Copyright (C) 2005, 2006 by</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>About Qt</source>
        <translation>O QT</translation>
    </message>
    <message>
        <location line="+13"/>
        <location line="+147"/>
        <location line="+18"/>
        <source>Result:</source>
        <translation>Wynik:</translation>
    </message>
    <message>
        <location line="-164"/>
        <location line="+1"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="+120"/>
        <source>Stop frequency must be greater than start frequency.</source>
        <translation>Częstotliwość końcowa musi być większa niż częstotliwość początkowa.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Filter order must not be less than two.</source>
        <translation>Rząd filtra nie może być mniejszy niż dwa.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Bessel filter order must not be greater than 19.</source>
        <translation>Rząd filtra Bessela musi być większy niż 19.</translation>
    </message>
    <message>
        <location line="+16"/>
        <location line="+17"/>
        <source>Successful</source>
        <translation>Zakończono</translation>
    </message>
    <message>
        <location line="-9"/>
        <source>Result: --</source>
        <translation>Wynik: --</translation>
    </message>
    <message>
        <location line="+71"/>
        <source>Start frequency:</source>
        <translation>Częstotliwość początkopwa:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Pass band frequency:</source>
        <translation>Częstotliwość pasma przepustowego:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Pass band attenuation:</source>
        <translation>Tłumienie pasma przepustowego:</translation>
    </message>
</context>
<context>
    <name>QucsHelp</name>
    <message>
        <source>Qucs Help System</source>
        <translation type="vanished">System pomocy programu Qucs</translation>
    </message>
    <message>
        <source>&amp;Quit</source>
        <translation type="vanished">&amp;Wyjście</translation>
    </message>
    <message>
        <source>&amp;Back</source>
        <translation type="vanished">Wste&amp;cz</translation>
    </message>
    <message>
        <source>&amp;Forward</source>
        <translation type="vanished">W&amp;przód</translation>
    </message>
    <message>
        <source>&amp;Home</source>
        <translation type="vanished">Powró&amp;t</translation>
    </message>
    <message>
        <source>&amp;Previous</source>
        <translation type="vanished">Poprzed&amp;ni</translation>
    </message>
    <message>
        <source>&amp;Next</source>
        <translation type="vanished">Następn&amp;y</translation>
    </message>
    <message>
        <source>&amp;Table of Contents</source>
        <translation type="vanished">Spis &amp;treści</translation>
    </message>
    <message>
        <source>Enables/disables the table of contents</source>
        <translation type="vanished">włacz/wyłacz spis treści</translation>
    </message>
    <message>
        <source>Table of Contents

Enables/disables the table of contents</source>
        <translation type="vanished">Zawartość

włącza/wyłącza wyświetlanie spisu treści</translation>
    </message>
    <message>
        <source>&amp;About Qt</source>
        <translation type="vanished">&amp;O QT</translation>
    </message>
    <message>
        <source>&amp;File</source>
        <translation type="vanished">&amp;Plik</translation>
    </message>
    <message>
        <source>&amp;View</source>
        <translation type="vanished">&amp;Widok</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="vanished">&amp;Pomoc</translation>
    </message>
    <message>
        <source>Contents</source>
        <translation type="vanished">Zawartość</translation>
    </message>
    <message>
        <source>Home</source>
        <translation type="vanished">Powrót</translation>
    </message>
</context>
<context>
    <name>QucsLib</name>
    <message>
        <source>&amp;File</source>
        <translation type="vanished">&amp;Plik</translation>
    </message>
    <message>
        <source>Manage User &amp;Libraries...</source>
        <translation type="vanished">Zarządzaj bib&amp;liotekami użytkownika...</translation>
    </message>
    <message>
        <source>&amp;Quit</source>
        <translation type="vanished">&amp;Wyjście</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="vanished">&amp;Pomoc</translation>
    </message>
    <message>
        <source>About</source>
        <translation type="vanished">O programie</translation>
    </message>
    <message>
        <source>Component Selection</source>
        <translation type="vanished">Wybór elementu</translation>
    </message>
    <message>
        <source>Component</source>
        <translation type="vanished">Element</translation>
    </message>
    <message>
        <source>Copy to clipboard</source>
        <translation type="vanished">Kopiuj do schowka</translation>
    </message>
    <message>
        <source>Show Model</source>
        <translation type="vanished">Pokaż model</translation>
    </message>
    <message>
        <source>About...</source>
        <translation type="vanished">O...</translation>
    </message>
    <message>
        <source>Library Manager for Qucs
</source>
        <translation type="vanished">Menedżer biblioteki programu Qucs
</translation>
    </message>
    <message>
        <source>Copyright (C) 2005 by Michael Margraf
</source>
        <translation type="vanished">Copyright (C) 2005 by Michael Margraf
</translation>
    </message>
    <message>
        <source>QucsLib Help</source>
        <translation type="vanished">Pomoc QucsLib</translation>
    </message>
    <message>
        <source>QucsLib is a program to manage Qucs component libraries. On the left side of the application window the available libraries can be browsed to find the wanted component. By clicking on the component name its description can be seen on the right side. The selected component is transported to the Qucs application by clicking on the button &quot;Copy to Clipboard&quot;. Being back in the schematic window the component can be inserted by pressing CTRL-V  (paste from clipboard).</source>
        <translation type="vanished">QucsLib to program do zarządzania bibliotekami elementów programu Qucs. Z lewej strony okna aplikacji wyświetlane są dostępne biblioteki, w ktorych można znależć syukanego elementu. Klikając na naywę elementu można uzyskać jego opis po prawej stronie. wybrany element można przenieść na schemat klikajać  &quot;Kopiuj do schowka&quot;. W oknie schematu należy wcisnąć CTRL-V.</translation>
    </message>
    <message>
        <source>A more comfortable way: The component can also be placed onto the schematic by using Drag n&apos;Drop.</source>
        <translation type="vanished">wygodnejsza metoda: Element można &quot;przeciągnąć i upuścić&quot;.</translation>
    </message>
    <message>
        <source>Model</source>
        <translation type="vanished">Model</translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="vanished">Błąd</translation>
    </message>
    <message>
        <source>Cannot open &quot;%1&quot;.</source>
        <translation type="vanished">Nie można otworzyć &quot;%1&quot;.</translation>
    </message>
    <message>
        <source>Library is corrupt.</source>
        <translation type="vanished">Biblioteka jest uszkodzona.</translation>
    </message>
</context>
<context>
    <name>QucsPowerCombiningTool</name>
    <message>
        <location filename="../qucs-powercombining/qucspowercombiningtool.cpp" line="-218"/>
        <source>Ready! Use CTRL+V to paste the schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Error! The network could not be generated</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+785"/>
        <source>Bagley</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+340"/>
        <source>Tree combiner</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QucsSettingsDialog</name>
    <message>
        <location filename="../qucs/dialogs/qucssettingsdialog.cpp" line="+64"/>
        <source>Edit Qucs Properties</source>
        <translation>Edytuj właściwości Qucs</translation>
    </message>
    <message>
        <source>Font (set after reload):</source>
        <translation type="vanished">Font (zmiana aktywna po ponownym uruchmieniu programu):</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>Large font size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Document Background Color:</source>
        <translation>Kolor tła dokumentu:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Language (set after reload):</source>
        <translation>Język (zmiana po ponowmym uruchomieniu):</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>system language</source>
        <translation>język systemowy</translation>
    </message>
    <message>
        <location line="-1"/>
        <source>English</source>
        <translation>angielski</translation>
    </message>
    <message>
        <location line="-6"/>
        <source>German</source>
        <translation>niemiecki</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>French</source>
        <translation>francuski</translation>
    </message>
    <message>
        <location line="-12"/>
        <source>Spanish</source>
        <translation>hiszpański</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Italian</source>
        <translation>włoski</translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Polish</source>
        <translation>polski</translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Romanian</source>
        <translation>rumuński</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Japanese</source>
        <translation>japoński</translation>
    </message>
    <message>
        <location line="-8"/>
        <source>Swedish</source>
        <translation>szwedzki</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Hungarian</source>
        <translation>węgierski</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hebrew</source>
        <translation>hebrajski</translation>
    </message>
    <message>
        <location line="-6"/>
        <source>Portuguese-BR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>Portuguese-PT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-5"/>
        <source>Turkish</source>
        <translation>turecki</translation>
    </message>
    <message>
        <location line="-1"/>
        <source>Ukrainian</source>
        <translation>ukraiński</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Russian</source>
        <translation>rosyjski</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Czech</source>
        <translation>czeski</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Catalan</source>
        <translation>kataloński</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Arabic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Chinese</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-44"/>
        <source>Schematic font (set after reload):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Application font (set after reload):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+32"/>
        <source>Kazakh</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Maximum undo operations:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Text editor:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Set to qucs, qucsedit or the path to your favorite text editor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Start wiring when clicking open node:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Load documents from future versions:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Try to load also documents created with newer versions of Qucs.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Draw diagrams with anti-aliasing feature:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Draw text with anti-aliasing feature:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-4"/>
        <source>Use anti-aliasing for graphs for a smoother appearance.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-65"/>
        <source>Text document font (set after reload):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+71"/>
        <source>Use anti-aliasing for text for a smoother appearance.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Show trace name prefix on diagrams:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Show prefixes for trace names on diagrams like &quot;ngspice/&quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Settings</source>
        <translation>Ustawienia</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Colors for Syntax Highlighting:</source>
        <translation>Kolor podświetlenia składni:</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Comment</source>
        <translation>Komentarz</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>String</source>
        <translation>Ciąg znaków</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Integer Number</source>
        <translation>Liczba całkowita</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Real Number</source>
        <translation>Liczba rzeczywista</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Character</source>
        <translation>Znak</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Data Type</source>
        <translation>Typ danych</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Attribute</source>
        <translation>Atrybut</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Directive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Task</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Source Code Editor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Register filename extensions here in order to
open files with an appropriate program.</source>
        <translation>Zarejestruj rozszerzenie pliku tak by móc
otworzyć ten plik odpowiednim programem.</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Suffix</source>
        <translation>sufiks</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Program</source>
        <translation>Program</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Suffix:</source>
        <translation>sufiks:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Program:</source>
        <translation>Program:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Set</source>
        <translation>Ustaw</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Remove</source>
        <translation>Usuń</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>File Types</source>
        <translation>Typy plików</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Edit the standard paths and external applications</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Qucs Home:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>AdmsXml Path:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>ASCO Path:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Octave Path:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>OpenVAF Path:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>RF Layout Path:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Subcircuit Search Path List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Locations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Apply</source>
        <translation>Zastosuj</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Default Values</source>
        <translation>Wartości domyślne</translation>
    </message>
    <message>
        <location line="+65"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This suffix is already registered!</source>
        <translation>Ten typ pliku jest już zarejestrowany!</translation>
    </message>
    <message>
        <location line="+465"/>
        <source>Select the home directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Select the admsXml bin directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Select the ASCO bin directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Select the octave executable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Select the OpenVAF executable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Select the Qucs-RFLayout executable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+28"/>
        <location line="+20"/>
        <source>Select a directory</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QucsTranscalc</name>
    <message>
        <location filename="../qucs-transcalc/qucstrans.cpp" line="-846"/>
        <source>&amp;File</source>
        <translation>&amp;Plik</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;Load</source>
        <translation>&amp;Otwórz</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+L</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;Save</source>
        <translation>&amp;Zapisz</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>&amp;Options</source>
        <translation>&amp;Opcje</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ctrl+O</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>&amp;Quit</source>
        <translation>&amp;Wyjście</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>&amp;Execute</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;Copy to Clipboard</source>
        <translation>Kopiuj do s&amp;chowka</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&amp;Analyze</source>
        <translation>&amp;Analiza</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&amp;Synthesize</source>
        <translation>&amp;Synteza</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+1"/>
        <source>&amp;Help</source>
        <translation>&amp;Pomoc</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>About</source>
        <translation>O programie</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Transmission Line Type</source>
        <translation>Rodzaj linii transmisyjnej</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Microstrip Line</source>
        <translation>Linia mikropaskowa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Coplanar Waveguide</source>
        <translation>Falowód koplanarny</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Grounded Coplanar</source>
        <translation>Linia koplanarna &quot;grounded&quot;</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Rectangular Waveguide</source>
        <translation>Falowód prostokątny</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Coaxial Line</source>
        <translation>Linia koncentryczna</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Coupled Microstrip</source>
        <translation>Linia mikropaskowa sprzężona</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Stripline</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Substrate Parameters</source>
        <translation>Parametry podłoża</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Component Parameters</source>
        <translation>Parametry elementu</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Physical Parameters</source>
        <translation>Parametry fizyczne</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Analyze</source>
        <translation>Analiza</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Derive Electrical Parameters</source>
        <translation>Oblicz parametry elektryczne</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Synthesize</source>
        <translation>Synteza</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Compute Physical Parameters</source>
        <translation>Oblicz parametry fizyczne</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Electrical Parameters</source>
        <translation>Parametry elektryczne</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Calculated Results</source>
        <translation>Obliczone wyniki</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+592"/>
        <location line="+171"/>
        <location line="+19"/>
        <source>Ready.</source>
        <translation>Gotowe.</translation>
    </message>
    <message>
        <location line="-731"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <source>ErEff</source>
        <translation>Efektywne Er</translation>
    </message>
    <message>
        <location line="-17"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+15"/>
        <source>Conductor Losses</source>
        <translation>Straty przewodnika</translation>
    </message>
    <message>
        <location line="-38"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+15"/>
        <source>Dielectric Losses</source>
        <translation>Straty dielektryka</translation>
    </message>
    <message>
        <location line="-38"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+22"/>
        <location line="+5"/>
        <source>Skin Depth</source>
        <translation>Głębokość wnikania</translation>
    </message>
    <message>
        <location line="-21"/>
        <location line="+6"/>
        <source>TE-Modes</source>
        <translation>Mod TE</translation>
    </message>
    <message>
        <location line="-5"/>
        <location line="+6"/>
        <source>TM-Modes</source>
        <translation>Mod TM</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>ErEff Even</source>
        <translation>ErEff nieparzyste</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>ErEff Odd</source>
        <translation>ErEff parzyste</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Conductor Losses Even</source>
        <translation>Straty przewodnika nieparzyste</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Conductor Losses Odd</source>
        <translation>Straty przewodnika parzyste</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Dielectric Losses Even</source>
        <translation>Straty dielektryka nieparzyste</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Dielectric Losses Odd</source>
        <translation>Straty dielektryka parzyste</translation>
    </message>
    <message>
        <location line="+11"/>
        <location line="+15"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+17"/>
        <source>Relative Permittivity</source>
        <translation>Przenikalność względna</translation>
    </message>
    <message>
        <location line="-82"/>
        <location line="+41"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+17"/>
        <source>Relative Permeability</source>
        <translation>względna</translation>
    </message>
    <message>
        <location line="-82"/>
        <location line="+14"/>
        <location line="+13"/>
        <location line="+39"/>
        <source>Height of Substrate</source>
        <translation>Grubość podłoża</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+66"/>
        <source>Height of Box Top</source>
        <translation>Wysokość do pokrywy</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+40"/>
        <source>Strip Thickness</source>
        <translation>Grubość paska</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+40"/>
        <source>Strip Conductivity</source>
        <translation>Przewodność paska</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+12"/>
        <location line="+16"/>
        <location line="+13"/>
        <source>Dielectric Loss Tangent</source>
        <translation>Tangens kąta stratności dielektryka</translation>
    </message>
    <message>
        <location line="-78"/>
        <location line="+66"/>
        <source>Conductor Roughness</source>
        <translation>Chropowatość przewodnika</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+12"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+16"/>
        <location line="+15"/>
        <source>Frequency</source>
        <translation>Częstotliwość</translation>
    </message>
    <message>
        <location line="-80"/>
        <location line="+12"/>
        <location line="+13"/>
        <location line="+41"/>
        <source>Line Width</source>
        <translation>Szerokość linii</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+13"/>
        <location line="+13"/>
        <source>Line Length</source>
        <translation>Długość linii</translation>
    </message>
    <message>
        <location line="-25"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+30"/>
        <source>Characteristic Impedance</source>
        <translation>Impedancja charakterystyczna</translation>
    </message>
    <message>
        <location line="-80"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+17"/>
        <location line="+13"/>
        <source>Electrical Length</source>
        <translation>Długość elektryczna</translation>
    </message>
    <message>
        <location line="-71"/>
        <location line="+13"/>
        <location line="+41"/>
        <source>Gap Width</source>
        <translation>szerokość odstępu</translation>
    </message>
    <message>
        <location line="-33"/>
        <location line="+14"/>
        <location line="+29"/>
        <source>Conductivity of Metal</source>
        <translation>Przewodność metalu</translation>
    </message>
    <message>
        <location line="-41"/>
        <source>Magnetic Loss Tangent</source>
        <translation>Tangens kąta stratności</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Width of Waveguide</source>
        <translation>Szerokość falowodu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Height of Waveguide</source>
        <translation>Wysokość falowodu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Waveguide Length</source>
        <translation>Długość falowodu</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Inner Diameter</source>
        <translation>Średnica wewnętrzna</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Outer Diameter</source>
        <translation>Średnica zewnętrzna</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+16"/>
        <location line="+14"/>
        <source>Length</source>
        <translation>Długość</translation>
    </message>
    <message>
        <location line="-13"/>
        <source>Even-Mode Impedance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Odd-Mode Impedance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Conductor thickness</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Substrate height</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+141"/>
        <source>Selected for Calculation</source>
        <translation>wybrane do obliczeń</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Check item for Calculation</source>
        <translation>Wybierz do policzenia</translation>
    </message>
    <message>
        <location line="+216"/>
        <source>About...</source>
        <translation>O...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Transmission Line Calculator for Qucs
</source>
        <translation>Kalkulator linii transmisyjnych dla Qucs
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2001 by Gopal Narayanan
</source>
        <translation>Copyright (C) 2001 by Gopal Narayanan
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2002 by Claudio Girardi
</source>
        <translation>Copyright (C) 2002 by Claudio Girardi
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2005 by Stefan Jahn
</source>
        <translation>Copyright (C) 2005 by Stefan Jahn
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2008 by Michael Margraf
</source>
        <translation>Copyright (C) 2008 by Michael Margraf

</translation>
    </message>
    <message>
        <location line="+43"/>
        <location line="+11"/>
        <source>Values are consistent.</source>
        <translation>Wartości są niesprzeczne.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Failed to converge!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Values are inconsistent.</source>
        <translation>Wartości są sprzeczne.</translation>
    </message>
    <message>
        <location line="+132"/>
        <source>Loading file...</source>
        <translation>Ładowanie pliku...</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+19"/>
        <source>Enter a Filename</source>
        <translation>Podaj nazwę pliku</translation>
    </message>
    <message>
        <location line="-17"/>
        <location line="+19"/>
        <source>Transcalc File</source>
        <translation>Plik kalkulatora Transcalc</translation>
    </message>
    <message>
        <location line="-15"/>
        <location line="+19"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="-18"/>
        <source>Cannot load file:</source>
        <translation>Nie można załadować pliku:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Loading aborted.</source>
        <translation>Ładowania przerwane.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Saving file...</source>
        <translation>Zapisywanie pliku...</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Cannot save file:</source>
        <translation>Nie można zapisać pliku:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Saving aborted.</source>
        <translation>Zapisywanie przerwane.</translation>
    </message>
    <message>
        <location line="+298"/>
        <source>Schematic copied into clipboard.</source>
        <translation>Skopiowano schemat do schowka.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Transmission line type not available.</source>
        <translation>Niedostępny rodzaj linii transmisyjnej.</translation>
    </message>
</context>
<context>
    <name>Qucs_S_SPAR_Viewer</name>
    <message>
        <location filename="../qucs-s-spar-viewer/qucs-s-spar-viewer.cpp" line="+57"/>
        <source>&amp;File</source>
        <translation type="unfinished">&amp;Plik</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;Quit</source>
        <translation type="unfinished">&amp;Wyjście</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;Open session file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;Save session as ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;Save session</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+2"/>
        <source>&amp;Help</source>
        <translation type="unfinished">&amp;Pomoc</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&amp;About</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>About Qt...</source>
        <translation type="unfinished">O bibliotece QT...</translation>
    </message>
    <message>
        <location line="+453"/>
        <source>Qucs-S S-parameter Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This is a simple viewer for S-parameter data.
It can show several .snp files at a time in the same diagram. Trace markers can also be added so that the user can read the trace value at at an specific frequency.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>About Qt</source>
        <translation type="unfinished">O QT</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>About...</source>
        <translation type="unfinished">O...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>
Copyright (C) 2024 by</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>S-Parameter Files (*.s1p *.s2p *.s3p *.s4p);;All Files (*.*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+41"/>
        <location line="+584"/>
        <location line="+771"/>
        <location line="+569"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1923"/>
        <source>This file is already in the dataset.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+584"/>
        <source>This trace is already shown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+771"/>
        <location line="+569"/>
        <source>The display contains no traces.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+220"/>
        <location line="+24"/>
        <source>Error</source>
        <translation type="unfinished">Błąd</translation>
    </message>
    <message>
        <location line="-23"/>
        <location line="+24"/>
        <source>Nothing to save: No data was loaded.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-18"/>
        <source>Save session</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+175"/>
        <source>Qucs-S snp viewer session (*.spar);</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-2"/>
        <source>Open S-parameter Viewer Session</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SaveDialog</name>
    <message>
        <location filename="../qucs/dialogs/savedialog.cpp" line="+39"/>
        <source>Save the modified files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Select files to be saved</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Modified Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Abort Closing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Don&apos;t Save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Save Selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Untitled</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Schematic</name>
    <message>
        <location filename="../qucs/schematic.cpp" line="-2536"/>
        <source>Title</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Drawn By:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Date:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Revision:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+65"/>
        <source>Edit Schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edits the schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edit Schematic

Edits the schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Edit Circuit Symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edits the symbol for this schematic</source>
        <translation>Edytuj symbol dla tego schematu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Edit Circuit Symbol

Edits the symbol for this schematic</source>
        <translation>Edytuj Symbol Układu

Edytuj szmbol dla tego schematu</translation>
    </message>
    <message>
        <location line="+1594"/>
        <source>generic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs/schematic_file.cpp" line="-1442"/>
        <location line="+22"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="-21"/>
        <source>Program admsXml not found: %1

Set the admsXml location on the application settings.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+896"/>
        <source>Netlist error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>S2Spice warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+155"/>
        <source>ERROR: Cannot create library file &quot;%s&quot;.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SearchDialog</name>
    <message>
        <location filename="../qucs/dialogs/searchdialog.ui" line="+14"/>
        <source>Dialog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Text to search for</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Text to replace with</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Ask before replacing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Case sensitive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Whole words only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Search backwards</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Next</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Close</source>
        <translation>Zamknij</translation>
    </message>
    <message>
        <location filename="../qucs/dialogs/searchdialog.cpp" line="+48"/>
        <source>Replace Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Search Text</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SettingsDialog</name>
    <message>
        <location filename="../qucs/dialogs/settingsdialog.cpp" line="-312"/>
        <source>Edit File Properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Data Set:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+8"/>
        <location line="+11"/>
        <source>Browse</source>
        <translation type="unfinished">Pokaż</translation>
    </message>
    <message>
        <location line="-15"/>
        <source>Data Display:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>open data display after simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Octave Script:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>run script after simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>show Grid</source>
        <translation>pokaż siatkę</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>horizontal Grid:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>vertical Grid:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Grid</source>
        <translation>Siatka</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>no Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A5 landscape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A5 portrait</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A4 landscape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A4 portrait</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A3 landscape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A3 portrait</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Letter landscape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Letter portrait</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Apply</source>
        <translation>Zastosuj</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
</context>
<context>
    <name>SimMessage</name>
    <message>
        <location filename="../qucs/dialogs/simmessage.cpp" line="+67"/>
        <source>Qucs Simulation Messages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <location line="+18"/>
        <source>Progress:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Errors and Warnings:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Goto display page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+22"/>
        <source>Abort simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Starting new simulation on %1 at %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>creating netlist... </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+327"/>
        <location line="+24"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="-24"/>
        <location line="+24"/>
        <source>Cannot read netlist!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-357"/>
        <source>ERROR: Simulator is still running!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>ERROR: Cannot write netlist file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>ERROR: Cannot simulate a text file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+63"/>
        <source>ERROR: Cannot open SPICE file &quot;%1&quot;.</source>
        <translation>BŁĄD: Nie można otworzyć pliku SPICE &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>SIM ERROR: Cannot start QucsConv!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+105"/>
        <location line="+104"/>
        <source>done.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-61"/>
        <location line="+7"/>
        <source>ERROR: Cannot create VHDL directory &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>ERROR: Cannot create &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+307"/>
        <source>ERROR: Cannot start </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Starting </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>ERROR: Simulator crashed!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Please report this error to qucs-bugs@lists.sourceforge.net</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Close window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Simulation ended on %1 at %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Ready.</source>
        <translation>Gotowe.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Errors occurred during simulation on %1 at %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Aborted.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Output:
-------</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Errors and Warnings:
--------------------</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+46"/>
        <source>Simulation aborted by the user!</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SimSettingsDialog</name>
    <message>
        <location filename="../qucs/extsimkernels/simsettingsdialog.cpp" line="+31"/>
        <source>Ngspice executable location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Xyce executable location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>SpiceOpus executable location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Qucsator executable location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Extra simulator parameters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Apply changes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation type="unfinished">Porzuć</translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+2"/>
        <location line="+4"/>
        <location line="+2"/>
        <source>Select ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Ngspice compatibility mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>SPICE settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+46"/>
        <source>Qucsator settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Setup simulators executable location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+43"/>
        <source>Select Ngspice executable location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Select Xyce executable location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Select SpiceOpus executable location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Select Qucsator executable location</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SpiceDialog</name>
    <message>
        <location filename="../qucs/components/spicedialog.cpp" line="+49"/>
        <source>Edit SPICE Component Properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Name:</source>
        <translation>Nazwa:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Browse</source>
        <translation>Pokaż</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>show file name in schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edit</source>
        <translation>Edycja</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>include SPICE simulations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>preprocessor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>SPICE net nodes:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Component ports:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Add &gt;&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&lt;&lt; Remove</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Apply</source>
        <translation>Zastosuj</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+166"/>
        <source>Select a file</source>
        <translation>Wybierz plik</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>SPICE netlist</source>
        <translation>netlista w formacie SPICE</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>All Files</source>
        <translation>Wszystkie pliki</translation>
    </message>
    <message>
        <location line="+101"/>
        <location line="+67"/>
        <source>Info</source>
        <translation>Informacja</translation>
    </message>
    <message>
        <location line="-66"/>
        <source>Preprocessing SPICE file &quot;%1&quot;.</source>
        <translation>Preprocessing SPICE file &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+12"/>
        <location line="+55"/>
        <source>Error</source>
        <translation>Błąd</translation>
    </message>
    <message>
        <location line="-66"/>
        <source>Cannot save preprocessed SPICE file &quot;%1&quot;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <location line="+55"/>
        <source>Cannot execute &quot;%1&quot;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-35"/>
        <source>SPICE Preprocessor Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Converting SPICE file &quot;%1&quot;.</source>
        <translation>Konwersja pliku SPICE &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>QucsConv Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SpiceFile</name>
    <message>
        <location filename="../qucs/components/spicefile.cpp" line="-3"/>
        <source>Converting SPICE file &quot;%1&quot;.</source>
        <translation>Konwersja pliku SPICE &quot;%1&quot;.</translation>
    </message>
</context>
<context>
    <name>SpiceLibCompDialog</name>
    <message>
        <location filename="../qucs/extsimkernels/spicelibcompdialog.cpp" line="+49"/>
        <location line="+22"/>
        <source>Open</source>
        <translation type="unfinished">Otwórz</translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Automatic symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Symbol from template</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Symbol from file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>Show</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+40"/>
        <source>OK</source>
        <translation type="unfinished">OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Apply</source>
        <translation type="unfinished">Zastosuj</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation type="unfinished">Porzuć</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>SPICE model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Edit SPICE library device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+46"/>
        <source>Failed open file: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>SPICE library parse error.
No SUBCKT directive found in library </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>SPICE library parse error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+36"/>
        <location line="+86"/>
        <location line="+155"/>
        <location line="+15"/>
        <source>Error</source>
        <translation type="unfinished">Błąd</translation>
    </message>
    <message>
        <location line="-256"/>
        <source>Failed to open file: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+61"/>
        <source>No symbol loaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Failed to load symbol file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+68"/>
        <source>Open SPICE library</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>SPICE files (*.cir +.ckt *.sp *.lib)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Open symbol file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Schematic symbol (*.sym)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <location line="+10"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-10"/>
        <source>All pins must be assigned</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Set a valid symbol file name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+44"/>
        <location line="+15"/>
        <source>There were library file parse error! Cannot apply changes.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SweepDialog</name>
    <message>
        <location filename="../qucs/dialogs/sweepdialog.cpp" line="+92"/>
        <source>Bias Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+30"/>
        <source>Close</source>
        <translation>Zamknij</translation>
    </message>
</context>
<context>
    <name>SymbolWidget</name>
    <message>
        <location filename="../qucs/symbolwidget.cpp" line="+53"/>
        <source>Symbol:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+18"/>
        <source>! Drag n&apos;Drop me !</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+274"/>
        <source>Warning: Symbol &apos;%1&apos; missing in Qucs Library.
Drag and Drop may still work.
Please contact the developers.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+52"/>
        <location line="+4"/>
        <source>Error</source>
        <translation type="unfinished">Błąd</translation>
    </message>
    <message>
        <location line="-4"/>
        <source>Cannot open &quot;%1&quot;.</source>
        <translation type="unfinished">Nie można otworzyć &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Library is corrupt.</source>
        <translation type="unfinished">Biblioteka jest uszkodzona.</translation>
    </message>
</context>
<context>
    <name>TextBoxDialog</name>
    <message>
        <location filename="../qucs/dialogs/textboxdialog.cpp" line="+36"/>
        <source>Component: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Apply</source>
        <translation type="unfinished">Zastosuj</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation type="unfinished">Porzuć</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>OK</source>
        <translation type="unfinished">OK</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Editor</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TextDoc</name>
    <message>
        <location filename="../qucs/textdoc.cpp" line="+225"/>
        <source>Edit Text Symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edits the symbol for this text document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Edit Text Symbol

Edits the symbol for this text document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>VHDL entity</source>
        <translation>VHDL entity</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts skeleton of VHDL entity</source>
        <translation>wstaw szkielet VHDL entity</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>VHDL entity

Inserts the skeleton of a VHDL entity</source>
        <translation>VHDL entity

wstawia szkielet VHDL entity</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Verilog module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts skeleton of Verilog module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Verilog module

Inserts the skeleton of a Verilog module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Octave function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts skeleton of Octave function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Octave function

Inserts the skeleton of a Octave function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Find...</source>
        <translation>Znajdź...</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Cannot find target: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Replace...</source>
        <translation>Zamień...</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Replace occurrence ?</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TransferFuncDialog</name>
    <message>
        <location filename="../qucs-activefilter/transferfuncdialog.cpp" line="+24"/>
        <source>Define filter transfer function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Numerator b[i]=</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Denominator a[i]=</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>a[i]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <source>b[i]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Accept</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
</context>
<context>
    <name>TunerDialog</name>
    <message>
        <location filename="../qucs/dialogs/tuner.cpp" line="+732"/>
        <source>Add component</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Adding components from different schematics is not supported!</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>VASettingsDialog</name>
    <message>
        <location filename="../qucs/dialogs/vasettingsdialog.cpp" line="+43"/>
        <source>Document Settings</source>
        <translation>Ustawienia dokumentu</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Code Creation Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Browse</source>
        <translation>Pokaż</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Output file:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Recreate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Icon description:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Description:</source>
        <translation>Opis:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>unspecified device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>NPN/PNP polarity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>NMOS/PMOS polarity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>analog only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>digital only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>both</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Ok</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Porzuć</translation>
    </message>
    <message>
        <location line="+60"/>
        <source>PNG files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Any file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Enter an Icon File Name</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>fillFromSpiceDialog</name>
    <message>
        <location filename="../qucs/dialogs/fillfromspicedialog.cpp" line="+21"/>
        <source>Insert .MODEL text here</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>OK</source>
        <translation type="unfinished">OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation type="unfinished">Porzuć</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Convert number notation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Import SPICE model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+148"/>
        <source>No .MODEL directive found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Device type doesn&apos;t match the model type. 
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Model found: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Models expected: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>SPICE model parse error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Subcircuit model (.SUBCKT) found
Modelcard (.MODEL) expected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Model LEVEL=%1 is not allowed for unified MOS device
Use red SPICE device from Microelectronics group
Allowed LEVELS are: 1,2,3,4,5,6,9</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Error</source>
        <translation type="unfinished">Błąd</translation>
    </message>
</context>
<context>
    <name>tunerElement</name>
    <message>
        <location filename="../qucs/dialogs/tuner.cpp" line="-568"/>
        <source>Max.:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Min.:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Val.:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Step</source>
        <translation type="unfinished"></translation>
    </message>
</context>
</TS>