Welcome to the VPN Setup GUI project. This is a Free and Open Source Software (FOSS) project aimed at helping small VPN operators set up their networks quickly and easily.
Setting up a VPN can be a complex task, especially for small operators who may not have a dedicated IT team. This project aims to simplify that process by providing a graphical user interface (GUI) for setting up VPN networks.
With this tool, operators can configure their VPN networks without needing to understand complex networking concepts or write configuration files by hand. The GUI provides a simple, intuitive interface that guides operators through the setup process step by step.
We welcome contributions from the community. If you're interested in contributing, please see our CONTRIBUTING.md file for more information.
At present, the development roadmap is here ROADMAP.md
At present, simply clone this repository onto a Linux machine. A Debian-based linux build is the only currently supported OS.
git clone https://github.com/radawson/wireguard-guiAfter the repository is cloned, change directory into the wireguard-gui directory
cd wireguard-guiNext, install the python requirements with sudo to make them global. Yes, you will get a warning about this.
sudo pip install -r requirements.txtOnce the installation is complete, change directory into src.
cd srcNext, Make any adjustments you need to make to config.yaml. Note that the default IP address is localhost, 127.0.0.1. If you want to access the web interface remotely, change this to an appropriate IP address.
Security warning You can also use 0.0.0.0 to listen on all IP addresses, but understand the implications of this.
The one key in config.yaml you MUST change is the SUDO_PASSWORD. This must be the sudo password for the user that will be running the python script. We DO NOT recommend running the entire python web server with sudo. Your user that runs the wepython script will have to have sudo permission to set up the WireGuard services. If you are only using the datbase for tracking, you won't have tyo use sudo or a sudo user because you won't be elevating permissions.
SUDO_PASSWORD: 'changeme'The MODE key in the config file determines whether this server will run as a wireguard server (hub) or as a database for configuration files. The options for this key are 'server' or 'database'
This is also a good time to make sure that your firewall has port 5000 (default) open for the webserver. You will also need to open port 51820 UDP (default) for the WireGuard service.
Examples using ufw:
sudo ufw allow 5000/tcp
sudo ufw allow 51820/udpPure Python reimplementation of wireguard-tools with an aim to provide easily reusable library functions to handle reading and writing of WireGuard® configuration files as well as interacting with WireGuard devices, both in-kernel through the Netlink API and userspace implementations through the cross-platform UAPI API.
pipx install wireguard-tools
wg-py --helpImplemented wg command line functionality,
- show - Show configuration and device information
- showconf - Dump current device configuration
- set - Change current configuration, add/remove/change peers
- setconf - Apply configuration to device
- addconf - Append configuration to device
- syncconf - Synchronizes configuration with device
- genkey, genpsk, pubkey - Key generation
Also includes some wg-quick functions,
- up, down - Create and configure WireGuard device and interface
- save - Dump device and interface configuration
- strip - Filter wg-quick settings from configuration
Needs root (sudo) access to query and configure the WireGuard devices through
netlink. But root doesn't know about the currently active virtualenv, you may
have to pass the full path to the script in the virtualenv, or use
python3 -m wireguard_tools
sudo `which wg-py` showconf <interface>
sudo /path/to/venv/python3 -m wireguard_tools showconf <interface>The WireguardKey class will parse base64-encoded keys, the default base64 encoded string, but also an urlsafe base64 encoded variant. It also exposes both private key generating and public key deriving functions. Be sure to pass any base64 or hex encoded keys as 'str' and not 'bytes', otherwise it will assume the key was already decoded to its raw form.
from wireguard_tools import WireguardKey
private_key = WireguardKey.generate()
public_key = private_key.public_key()
# print base64 encoded key
print(public_key)
# print urlsafe encoded key
print(public_key.urlsafe)
# print hexadecimal encoded key
print(public_key.hex())The WireGuard configuration file is similar to, but not quite, the INI format because it has duplicate keys for both section names (i.e. [Peer]) as well as configuration keys within a section. According to the format description, AllowedIPs, Address, and DNS configuration keys 'may be specified multiple times'.
from wireguard_tools import WireguardConfig
with open("wg0.conf") as fh:
config = WireguardConfig.from_wgconfig(fh)Also supported are the "Friendly Tags" comments as introduced by
prometheus-wireguard-exporter, where a [Peer] section can contain
comments which add a user friendly description and/or additional attributes.
[Peer]
# friendly_name = Peer description for end users
# friendly_json = {"flat"="json", "dictionary"=1, "attribute"=2}
...
These will show up as additional friendly_name and friendly_json attributes
on the WireguardPeer object.
We can also serialize and deserialize from a simple dict-based format which uses only basic JSON datatypes and, as such, can be used to convert to various formats (i.e. json, yaml, toml, pickle) either to disk or to pass over a network.
from wireguard_tools import WireguardConfig
from pprint import pprint
dict_config = dict(
private_key="...",
peers=[
dict(
public_key="...",
preshared_key=None,
endpoint_host="remote_host",
endpoint_port=5120,
persistent_keepalive=30,
allowed_ips=["0.0.0.0/0"],
friendly_name="Awesome Peer",
),
],
)
config = WireguardConfig.from_dict(dict_config)
dict_config = config.asdict()
pprint(dict_config)Finally, there is a to_qrcode function that returns a segno.QRCode object
which contains the configuration. This can be printed and scanned with the
wireguard-android application. Careful with these because the QRcode exposes
an easily captured copy of the private key as part of the configuration file.
It is convenient, but definitely not secure.
from wireguard_tools import WireguardConfig
from pprint import pprint
dict_config = dict(
private_key="...",
peers=[
dict(
public_key="...",
preshared_key=None,
endpoint_host="remote_host",
endpoint_port=5120,
persistent_keepalive=30,
allowed_ips=["0.0.0.0/0"],
),
],
)
config = WireguardConfig.from_dict(dict_config)
qr = config.to_qrcode()
qr.save("wgconfig.png")
qr.terminal(compact=True)from wireguard_tools import WireguardDevice
ifnames = [device.interface for device in WireguardDevice.list()]
device = WireguardDevice.get("wg0")
wgconfig = device.get_config()
device.set_config(wgconfig)The setconf/syncconf implementation is not quite correct. They currently use
the same underlying set of operations but netlink-api's set_config
implementation actually does something closer to syncconf, while the uapi-api
implementation matches setconf.
This implementation has only been tested on Linux where we've only actively used a subset of the available functionality, i.e. the common scenario is configuring an interface only once with just a single peer.
wireguard-tools is MIT licensed
Copyright (c) 2022-2024 Carnegie Mellon University
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
wireguard_tools/curve25519.py was released in the public domain
Copyright Nicko van Someren, 2021. This code is released into the public domain. https://gist.github.com/nickovs/cc3c22d15f239a2640c185035c06f8a3
"WireGuard" is a registered trademark of Jason A. Donenfeld.