Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/trivial

Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...

Documentation/00-INDEX

@@ -7,8 +7,8 @@ Please try and keep the descriptions small enough to fit on one line.
 
 Following translations are available on the WWW:
 
-   - Japanese, maintained by the JF Project (JF@linux.or.jp), at
-     http://www.linux.or.jp/JF/
+   - Japanese, maintained by the JF Project (jf@listserv.linux.or.jp), at
+     http://linuxjf.sourceforge.jp/
 
 00-INDEX
 	- this file.

Documentation/ABI/obsolete/sysfs-class-rfkill

@@ -7,7 +7,7 @@ Date:		09-Jul-2007
 KernelVersion	v2.6.22
 Contact:	[email protected]
 Description: 	Current state of the transmitter.
-		This file is deprecated and sheduled to be removed in 2014,
+		This file is deprecated and scheduled to be removed in 2014,
 		because its not possible to express the 'soft and hard block'
 		state of the rfkill driver.
 Values: 	A numeric value.

Documentation/ABI/stable/sysfs-module

@@ -6,7 +6,7 @@ Description:
 		The name of the module that is in the kernel.  This
 		module name will show up either if the module is built
 		directly into the kernel, or if it is loaded as a
-		dyanmic module.
+		dynamic module.
 
 	/sys/module/MODULENAME/parameters
 		This directory contains individual files that are each

Documentation/DocBook/filesystems.tmpl

@@ -387,7 +387,7 @@ an example.
      <title>See also</title>
 	<para>
 	  <citation>
-	   <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz">
+	   <ulink url="http://kernel.org/pub/linux/kernel/people/sct/ext3/journal-design.ps.gz">
 	   	Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen Tweedie
 	   </ulink>
 	  </citation>

Documentation/DocBook/libata.tmpl

@@ -22,8 +22,8 @@
    <para>
    The contents of this file are subject to the Open
    Software License version 1.1 that can be found at
-   <ulink url="http://www.opensource.org/licenses/osl-1.1.txt">http://www.opensource.org/licenses/osl-1.1.txt</ulink> and is included herein
-   by reference.
+   <ulink url="http://fedoraproject.org/wiki/Licensing:OSL1.1">http://fedoraproject.org/wiki/Licensing:OSL1.1</ulink>
+   and is included herein by reference.
    </para>
 
    <para>
@@ -945,7 +945,7 @@ and other resources, etc.
 
         <listitem>
 	<para>
-	!BSY &amp;&amp; ERR after CDB tranfer starts but before the
+	!BSY &amp;&amp; ERR after CDB transfer starts but before the
         last byte of CDB is transferred.  ATA/ATAPI standard states
         that &quot;The device shall not terminate the PACKET command
         with an error before the last byte of the command packet has
@@ -1050,7 +1050,7 @@ and other resources, etc.
 	   to complete a command.  Combined with the fact that MWDMA
 	   and PIO transfer errors aren't allowed to use ICRC bit up to
 	   ATA/ATAPI-7, it seems to imply that ABRT bit alone could
-	   indicate tranfer errors.
+	   indicate transfer errors.
 	   </para>
 	   <para>
 	   However, ATA/ATAPI-8 draft revision 1f removes the part

Documentation/DocBook/media/v4l/compat.xml

@@ -444,7 +444,7 @@ linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR24</constant></link></para></entr
 		<entry><para><link
 linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote>
 		      <para>Presumably all V4L RGB formats are
-little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue
+little-endian, although some drivers might interpret them according to machine endianness. V4L2 defines little-endian, big-endian and red/blue
 swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para>
 		    </footnote></para></entry>
 	      </row>
@@ -823,7 +823,7 @@ standard); 35468950&nbsp;Hz PAL and SECAM (625-line standards)</entry>
 		<row>
 		  <entry>sample_format</entry>
 		  <entry>V4L2_PIX_FMT_GREY. The last four bytes (a
-machine endianess integer) contain a frame counter.</entry>
+machine endianness integer) contain a frame counter.</entry>
 		</row>
 		<row>
 		  <entry>start[]</entry>

Documentation/arm/kernel_user_helpers.txt

@@ -25,7 +25,7 @@ inline (either in the code emitted directly by the compiler, or part of
 the implementation of a library call) when optimizing for a recent enough
 processor that has the necessary native support, but only if resulting
 binaries are already to be incompatible with earlier ARM processors due to
-useage of similar native instructions for other things.  In other words
+usage of similar native instructions for other things.  In other words
 don't make binaries unable to run on earlier processors just for the sake
 of not using these kernel helpers if your compiled code is not going to
 use new instructions for other purpose.

Documentation/cgroups/blkio-controller.txt

@@ -94,11 +94,11 @@ Throttling/Upper Limit policy
 
 Hierarchical Cgroups
 ====================
-- Currently none of the IO control policy supports hierarhical groups. But
-  cgroup interface does allow creation of hierarhical cgroups and internally
+- Currently none of the IO control policy supports hierarchical groups. But
+  cgroup interface does allow creation of hierarchical cgroups and internally
   IO policies treat them as flat hierarchy.
 
-  So this patch will allow creation of cgroup hierarhcy but at the backend
+  So this patch will allow creation of cgroup hierarchcy but at the backend
   everything will be treated as flat. So if somebody created a hierarchy like
   as follows.
 
@@ -266,7 +266,7 @@ Proportional weight policy files
 - blkio.idle_time
 	- Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
 	  This is the amount of time spent by the IO scheduler idling for a
-	  given cgroup in anticipation of a better request than the exising ones
+	  given cgroup in anticipation of a better request than the existing ones
 	  from other queues/cgroups. This is in nanoseconds. If this is read
 	  when the cgroup is in an idling state, the stat will only report the
 	  idle_time accumulated till the last idle period and will not include
@@ -283,34 +283,34 @@ Throttling/Upper limit policy files
 -----------------------------------
 - blkio.throttle.read_bps_device
 	- Specifies upper limit on READ rate from the device. IO rate is
-	  specified in bytes per second. Rules are per deivce. Following is
+	  specified in bytes per second. Rules are per device. Following is
 	  the format.
 
   echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
 
 - blkio.throttle.write_bps_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
-	  specified in bytes per second. Rules are per deivce. Following is
+	  specified in bytes per second. Rules are per device. Following is
 	  the format.
 
   echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
 
 - blkio.throttle.read_iops_device
 	- Specifies upper limit on READ rate from the device. IO rate is
-	  specified in IO per second. Rules are per deivce. Following is
+	  specified in IO per second. Rules are per device. Following is
 	  the format.
 
   echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
 
 - blkio.throttle.write_iops_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
-	  specified in io per second. Rules are per deivce. Following is
+	  specified in io per second. Rules are per device. Following is
 	  the format.
 
   echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
 
 Note: If both BW and IOPS rules are specified for a device, then IO is
-      subjectd to both the constraints.
+      subjected to both the constraints.
 
 - blkio.throttle.io_serviced
 	- Number of IOs (bio) completed to/from the disk by the group (as

Documentation/device-mapper/dm-raid.txt

@@ -28,7 +28,7 @@ The target is named "raid" and it accepts the following parameters:
   raid6_nc	RAID6 N continue
 		- rotating parity N (right-to-left) with data continuation
 
-  Refererence: Chapter 4 of
+  Reference: Chapter 4 of
   http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
 
 <#raid_params>: The number of parameters that follow.

Documentation/device-mapper/persistent-data.txt

@@ -3,7 +3,7 @@ Introduction
 
 The more-sophisticated device-mapper targets require complex metadata
 that is managed in kernel.  In late 2010 we were seeing that various
-different targets were rolling their own data strutures, for example:
+different targets were rolling their own data structures, for example:
 
 - Mikulas Patocka's multisnap implementation
 - Heinz Mauelshagen's thin provisioning target

Documentation/device-mapper/thin-provisioning.txt

@@ -1,7 +1,7 @@
 Introduction
 ============
 
-This document descibes a collection of device-mapper targets that
+This document describes a collection of device-mapper targets that
 between them implement thin-provisioning and snapshots.
 
 The main highlight of this implementation, compared to the previous

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -5,7 +5,7 @@ IPs present in the SoC.
 On top of that an omap_device is created to extend the platform_device
 capabilities and to allow binding with one or several hwmods.
 The hwmods will contain all the information to build the device:
-adresse range, irq lines, dma lines, interconnect, PRCM register,
+address range, irq lines, dma lines, interconnect, PRCM register,
 clock domain, input clocks.
 For the moment just point to the existing hwmod, the next step will be
 to move data from hwmod to device-tree representation.

Documentation/devicetree/bindings/arm/sirf.txt

@@ -1,3 +1,3 @@
-prima2 "cb" evalutation board
+prima2 "cb" evaluation board
 Required root node properties:
     - compatible = "sirf,prima2-cb", "sirf,prima2";

Documentation/devicetree/booting-without-of.txt

@@ -169,7 +169,7 @@ it with special cases.
 
         b) Entry with a flattened device-tree block.  Firmware loads the
         physical address of the flattened device tree block (dtb) into r2,
-        r1 is not used, but it is considered good practise to use a valid
+        r1 is not used, but it is considered good practice to use a valid
         machine number as described in Documentation/arm/Booting.
 
                 r0 : 0

Documentation/dmaengine.txt

@@ -63,7 +63,7 @@ The slave DMA usage consists of following steps:
 				  struct dma_slave_config *config)
 
    Please see the dma_slave_config structure definition in dmaengine.h
-   for a detailed explaination of the struct members.  Please note
+   for a detailed explanation of the struct members.  Please note
    that the 'direction' member will be going away as it duplicates the
    direction given in the prepare call.
 

Documentation/fb/matroxfb.txt

@@ -177,8 +177,8 @@ sgram    - tells to driver that you have Gxx0 with SGRAM memory. It has no
            effect without `init'.
 sdram    - tells to driver that you have Gxx0 with SDRAM memory.
            It is a default.
-inv24    - change timings parameters for 24bpp modes on Millenium and
-           Millenium II. Specify this if you see strange color shadows around
+inv24    - change timings parameters for 24bpp modes on Millennium and
+           Millennium II. Specify this if you see strange color shadows around
 	   characters.
 noinv24  - use standard timings. It is the default.
 inverse  - invert colors on screen (for LCD displays)
@@ -204,9 +204,9 @@ grayscale - enable grayscale summing. It works in PSEUDOCOLOR modes (text,
 	    can paint colors.
 nograyscale - disable grayscale summing. It is default.
 cross4MB - enables that pixel line can cross 4MB boundary. It is default for
-           non-Millenium.
+           non-Millennium.
 nocross4MB - pixel line must not cross 4MB boundary. It is default for
-             Millenium I or II, because of these devices have hardware
+             Millennium I or II, because of these devices have hardware
 	     limitations which do not allow this. But this option is
 	     incompatible with some (if not all yet released) versions of
 	     XF86_FBDev.

Documentation/filesystems/ext4.txt

@@ -308,7 +308,7 @@ min_batch_time=usec	This parameter sets the commit time (as
 			fast disks, at the cost of increasing latency.
 
 journal_ioprio=prio	The I/O priority (from 0 to 7, where 0 is the
-			highest priorty) which should be used for I/O
+			highest priority) which should be used for I/O
 			operations submitted by kjournald2 during a
 			commit operation.  This defaults to 3, which is
 			a slightly higher priority than the default I/O
@@ -343,7 +343,7 @@ noinit_itable		Do not initialize any uninitialized inode table
 init_itable=n		The lazy itable init code will wait n times the
 			number of milliseconds it took to zero out the
 			previous block group's inode table.  This
-			minimizes the impact on the systme performance
+			minimizes the impact on the system performance
 			while file system's inode table is being initialized.
 
 discard			Controls whether ext4 should issue discard/TRIM

Documentation/filesystems/gfs2-uevents.txt

@@ -62,7 +62,7 @@ be fixed.
 
 The REMOVE uevent is generated at the end of an unsuccessful mount
 or at the end of a umount of the filesystem. All REMOVE uevents will
-have been preceded by at least an ADD uevent for the same fileystem,
+have been preceded by at least an ADD uevent for the same filesystem,
 and unlike the other uevents is generated automatically by the kernel's
 kobject subsystem.
 

Documentation/filesystems/pohmelfs/network_protocol.txt

@@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command
 so one can extend protocol as needed without breaking backward compatibility as long
 as old commands are supported. All string lengths include tail 0 byte.
 
-All commands are transferred over the network in big-endian. CPU endianess is used at the end peers.
+All commands are transferred over the network in big-endian. CPU endianness is used at the end peers.
 
 @cmd - command number, which specifies command to be processed. Following
 	commands are used currently:

Documentation/filesystems/ramfs-rootfs-initramfs.txt

@@ -297,7 +297,7 @@ the above threads) is:
    either way about the archive format, and there are alternative tools,
    such as:
 
-     http://freshmeat.net/projects/afio/
+     http://freecode.com/projects/afio
 
 2) The cpio archive format chosen by the kernel is simpler and cleaner (and
    thus easier to create and parse) than any of the (literally dozens of)

Documentation/filesystems/vfs.txt

@@ -993,7 +993,7 @@ struct dentry_operations {
 
 	If the 'rcu_walk' parameter is true, then the caller is doing a
 	pathwalk in RCU-walk mode.  Sleeping is not permitted in this mode,
-	and the caller can be asked to leave it and call again by returing
+	and the caller can be asked to leave it and call again by returning
 	-ECHILD.
 
 	This function is only used if DCACHE_MANAGE_TRANSIT is set on the

Documentation/hwmon/adm1275

@@ -53,7 +53,7 @@ attributes are write-only, all other attributes are read-only.
 in1_label		"vin1" or "vout1" depending on chip variant and
 			configuration.
 in1_input		Measured voltage.
-in1_min			Minumum Voltage.
+in1_min			Minimum Voltage.
 in1_max			Maximum voltage.
 in1_min_alarm		Voltage low alarm.
 in1_max_alarm		Voltage high alarm.

Documentation/hwmon/max16064

@@ -42,9 +42,9 @@ attributes are read-only.
 
 in[1-4]_label		"vout[1-4]"
 in[1-4]_input		Measured voltage. From READ_VOUT register.
-in[1-4]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-4]_min		Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in[1-4]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-4]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-4]_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in[1-4]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in[1-4]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[1-4]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.

Documentation/hwmon/max34440

@@ -48,9 +48,9 @@ attributes are read-only.
 
 in[1-6]_label		"vout[1-6]".
 in[1-6]_input		Measured voltage. From READ_VOUT register.
-in[1-6]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-6]_min		Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in[1-6]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-6]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-6]_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in[1-6]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in[1-6]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[1-6]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.

Documentation/hwmon/max8688

@@ -42,9 +42,9 @@ attributes are read-only.
 
 in1_label		"vout1"
 in1_input		Measured voltage. From READ_VOUT register.
-in1_min			Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_min			Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in1_max			Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in1_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in1_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in1_min_alarm		Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in1_max_alarm		Voltage high alarm. From VOLTAGE_OV_WARNING status.

Documentation/hwmon/ucd9000

@@ -70,9 +70,9 @@ attributes are read-only.
 
 in[1-12]_label		"vout[1-12]".
 in[1-12]_input		Measured voltage. From READ_VOUT register.
-in[1-12]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-12]_min		Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in[1-12]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-12]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-12]_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in[1-12]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in[1-12]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[1-12]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
@@ -82,7 +82,7 @@ in[1-12]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
 curr[1-12]_label	"iout[1-12]".
 curr[1-12]_input	Measured current. From READ_IOUT register.
 curr[1-12]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
-curr[1-12]_lcrit	Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+curr[1-12]_lcrit	Critical minimum output current. From IOUT_UC_FAULT_LIMIT
 			register.
 curr[1-12]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
 curr[1-12]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.

Documentation/hwmon/ucd9200

@@ -54,9 +54,9 @@ attributes are read-only.
 
 in1_label		"vin".
 in1_input		Measured voltage. From READ_VIN register.
-in1_min			Minumum Voltage. From VIN_UV_WARN_LIMIT register.
+in1_min			Minimum Voltage. From VIN_UV_WARN_LIMIT register.
 in1_max			Maximum voltage. From VIN_OV_WARN_LIMIT register.
-in1_lcrit		Critical minumum Voltage. VIN_UV_FAULT_LIMIT register.
+in1_lcrit		Critical minimum Voltage. VIN_UV_FAULT_LIMIT register.
 in1_crit		Critical maximum voltage. From VIN_OV_FAULT_LIMIT register.
 in1_min_alarm		Voltage low alarm. From VIN_UV_WARNING status.
 in1_max_alarm		Voltage high alarm. From VIN_OV_WARNING status.
@@ -65,9 +65,9 @@ in1_crit_alarm		Voltage critical high alarm. From VIN_OV_FAULT status.
 
 in[2-5]_label		"vout[1-4]".
 in[2-5]_input		Measured voltage. From READ_VOUT register.
-in[2-5]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[2-5]_min		Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
 in[2-5]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[2-5]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[2-5]_lcrit		Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
 in[2-5]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
 in[2-5]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[2-5]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
@@ -80,7 +80,7 @@ curr1_input		Measured current. From READ_IIN register.
 curr[2-5]_label		"iout[1-4]".
 curr[2-5]_input		Measured current. From READ_IOUT register.
 curr[2-5]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
-curr[2-5]_lcrit		Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+curr[2-5]_lcrit		Critical minimum output current. From IOUT_UC_FAULT_LIMIT
 			register.
 curr[2-5]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
 curr[2-5]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.