This is custom Bela image with wooten and its prerequisites installed and configured to run at startup.
You can install it onto your Bela-equipped BeagleBone Black revC in the same way that you would install one of the Bela release images. Instructions are here: https://learn.bela.io/using-bela/bela-techniques/managing-your-sd-card/
Example steps:
- flash the provided image onto a micro SD card using balena etcher
- insert the micro SD card into the BeagleBone Black
- plug the BeagleBone Black into a computer via USB
- ssh in and flash the eMMC:
ssh [email protected]
/opt/Bela/bela_flash_emmc.sh
- now you can remove the SD card and reset the BeagleBone
- you should be able to access the wooten GUI at http://192.168.7.2/gui/