Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Lots of bug fixes here:

   1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.

   2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
      Crispin.

   3) Use after free in psock backlog workqueue, from John Fastabend.

   4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
      Salem.

   5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.

   6) Network header needs to be set for packet redirect in nfp, from
      John Hurley.

   7) Fix udp zerocopy refcnt, from Willem de Bruijn.

   8) Don't assume linear buffers in vxlan and geneve error handlers,
      from Stefano Brivio.

   9) Fix TOS matching in mlxsw, from Jiri Pirko.

  10) More SCTP cookie memory leak fixes, from Neil Horman.

  11) Fix VLAN filtering in rtl8366, from Linus Walluij.

  12) Various TCP SACK payload size and fragmentation memory limit fixes
      from Eric Dumazet.

  13) Use after free in pneigh_get_next(), also from Eric Dumazet.

  14) LAPB control block leak fix from Jeremy Sowden"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
  lapb: fixed leak of control-blocks.
  tipc: purge deferredq list for each grp member in tipc_group_delete
  ax25: fix inconsistent lock state in ax25_destroy_timer
  neigh: fix use-after-free read in pneigh_get_next
  tcp: fix compile error if !CONFIG_SYSCTL
  hv_sock: Suppress bogus "may be used uninitialized" warnings
  be2net: Fix number of Rx queues used for flow hashing
  net: handle 802.1P vlan 0 packets properly
  tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
  tcp: add tcp_min_snd_mss sysctl
  tcp: tcp_fragment() should apply sane memory limits
  tcp: limit payload size of sacked skbs
  Revert "net: phylink: set the autoneg state in phylink_phy_change"
  bpf: fix nested bpf tracepoints with per-cpu data
  bpf: Fix out of bounds memory access in bpf_sk_storage
  vsock/virtio: set SOCK_DONE on peer shutdown
  net: dsa: rtl8366: Fix up VLAN filtering
  net: phylink: set the autoneg state in phylink_phy_change
  net: add high_order_alloc_disable sysctl/static key
  tcp: add tcp_tx_skb_cache sysctl
  ...

Documentation/ABI/testing/sysfs-class-net-qmi

@@ -29,7 +29,7 @@ Contact:	Bjørn Mork <[email protected]>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to add a qmap mux
+		Write a number ranging from 1 to 254 to add a qmap mux
 		based network device, supported by recent Qualcomm based
 		modems.
 
@@ -46,5 +46,5 @@ Contact:	Bjørn Mork <[email protected]>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to delete a previously
+		Write a number ranging from 1 to 254 to delete a previously
 		created qmap mux based network device.

Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt

@@ -4,6 +4,7 @@ Required properties:
  - compatible: Should be one of the following:
    - "microchip,mcp2510" for MCP2510.
    - "microchip,mcp2515" for MCP2515.
+   - "microchip,mcp25625" for MCP25625.
  - reg: SPI chip select.
  - clocks: The clock feeding the CAN controller.
  - interrupts: Should contain IRQ line for the CAN controller.

Documentation/networking/af_xdp.rst

@@ -316,16 +316,16 @@ A: When a netdev of a physical NIC is initialized, Linux usually
    all the traffic, you can force the netdev to only have 1 queue, queue
    id 0, and then bind to queue 0. You can use ethtool to do this::
 
-   sudo ethtool -L <interface> combined 1
+     sudo ethtool -L <interface> combined 1
 
    If you want to only see part of the traffic, you can program the
    NIC through ethtool to filter out your traffic to a single queue id
    that you can bind your XDP socket to. Here is one example in which
    UDP traffic to and from port 4242 are sent to queue 2::
 
-   sudo ethtool -N <interface> rx-flow-hash udp4 fn
-   sudo ethtool -N <interface> flow-type udp4 src-port 4242 dst-port \
-   4242 action 2
+     sudo ethtool -N <interface> rx-flow-hash udp4 fn
+     sudo ethtool -N <interface> flow-type udp4 src-port 4242 dst-port \
+     4242 action 2
 
    A number of other ways are possible all up to the capabilitites of
    the NIC you have.

Documentation/networking/ip-sysctl.txt

@@ -255,6 +255,14 @@ tcp_base_mss - INTEGER
 	Path MTU discovery (MTU probing).  If MTU probing is enabled,
 	this is the initial MSS used by the connection.
 
+tcp_min_snd_mss - INTEGER
+	TCP SYN and SYNACK messages usually advertise an ADVMSS option,
+	as described in RFC 1122 and RFC 6691.
+	If this ADVMSS option is smaller than tcp_min_snd_mss,
+	it is silently capped to tcp_min_snd_mss.
+
+	Default : 48 (at least 8 bytes of payload per segment)
+
 tcp_congestion_control - STRING
 	Set the congestion control algorithm to be used for new
 	connections. The algorithm "reno" is always available, but
@@ -772,6 +780,14 @@ tcp_challenge_ack_limit - INTEGER
 	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
 	Default: 100
 
+tcp_rx_skb_cache - BOOLEAN
+	Controls a per TCP socket cache of one skb, that might help
+	performance of some workloads. This might be dangerous
+	on systems with a lot of TCP sockets, since it increases
+	memory usage.
+
+	Default: 0 (disabled)
+
 UDP variables:
 
 udp_l3mdev_accept - BOOLEAN

Documentation/networking/rds.txt

@@ -389,7 +389,7 @@ Multipath RDS (mprds)
   a common (to all paths) part, and a per-path struct rds_conn_path. All
   I/O workqs and reconnect threads are driven from the rds_conn_path.
   Transports such as TCP that are multipath capable may then set up a
-  TPC socket per rds_conn_path, and this is managed by the transport via
+  TCP socket per rds_conn_path, and this is managed by the transport via
   the transport privatee cp_transport_data pointer.
 
   Transports announce themselves as multipath capable by setting the

arch/powerpc/include/asm/ppc-opcode.h

@@ -338,6 +338,7 @@
 #define PPC_INST_MADDLD			0x10000033
 #define PPC_INST_DIVWU			0x7c000396
 #define PPC_INST_DIVD			0x7c0003d2
+#define PPC_INST_DIVDU			0x7c000392
 #define PPC_INST_RLWINM			0x54000000
 #define PPC_INST_RLWINM_DOT		0x54000001
 #define PPC_INST_RLWIMI			0x50000000

arch/powerpc/net/bpf_jit.h

@@ -112,7 +112,7 @@
 				     ___PPC_RA(a) | IMM_L(i))
 #define PPC_DIVWU(d, a, b)	EMIT(PPC_INST_DIVWU | ___PPC_RT(d) |	      \
 				     ___PPC_RA(a) | ___PPC_RB(b))
-#define PPC_DIVD(d, a, b)	EMIT(PPC_INST_DIVD | ___PPC_RT(d) |	      \
+#define PPC_DIVDU(d, a, b)	EMIT(PPC_INST_DIVDU | ___PPC_RT(d) |	      \
 				     ___PPC_RA(a) | ___PPC_RB(b))
 #define PPC_AND(d, a, b)	EMIT(PPC_INST_AND | ___PPC_RA(d) |	      \
 				     ___PPC_RS(a) | ___PPC_RB(b))

arch/powerpc/net/bpf_jit_comp64.c

@@ -395,12 +395,12 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 		case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */
 		case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */
 			if (BPF_OP(code) == BPF_MOD) {
-				PPC_DIVD(b2p[TMP_REG_1], dst_reg, src_reg);
+				PPC_DIVDU(b2p[TMP_REG_1], dst_reg, src_reg);
 				PPC_MULD(b2p[TMP_REG_1], src_reg,
 						b2p[TMP_REG_1]);
 				PPC_SUB(dst_reg, dst_reg, b2p[TMP_REG_1]);
 			} else
-				PPC_DIVD(dst_reg, dst_reg, src_reg);
+				PPC_DIVDU(dst_reg, dst_reg, src_reg);
 			break;
 		case BPF_ALU | BPF_MOD | BPF_K: /* (u32) dst %= (u32) imm */
 		case BPF_ALU | BPF_DIV | BPF_K: /* (u32) dst /= (u32) imm */
@@ -428,15 +428,15 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 				break;
 			case BPF_ALU64:
 				if (BPF_OP(code) == BPF_MOD) {
-					PPC_DIVD(b2p[TMP_REG_2], dst_reg,
+					PPC_DIVDU(b2p[TMP_REG_2], dst_reg,
 							b2p[TMP_REG_1]);
 					PPC_MULD(b2p[TMP_REG_1],
 							b2p[TMP_REG_1],
 							b2p[TMP_REG_2]);
 					PPC_SUB(dst_reg, dst_reg,
 							b2p[TMP_REG_1]);
 				} else
-					PPC_DIVD(dst_reg, dst_reg,
+					PPC_DIVDU(dst_reg, dst_reg,
 							b2p[TMP_REG_1]);
 				break;
 			}

arch/riscv/net/bpf_jit_comp.c

@@ -751,22 +751,32 @@ static int emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 	case BPF_ALU | BPF_ADD | BPF_X:
 	case BPF_ALU64 | BPF_ADD | BPF_X:
 		emit(is64 ? rv_add(rd, rd, rs) : rv_addw(rd, rd, rs), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_SUB | BPF_X:
 	case BPF_ALU64 | BPF_SUB | BPF_X:
 		emit(is64 ? rv_sub(rd, rd, rs) : rv_subw(rd, rd, rs), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_AND | BPF_X:
 	case BPF_ALU64 | BPF_AND | BPF_X:
 		emit(rv_and(rd, rd, rs), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_OR | BPF_X:
 	case BPF_ALU64 | BPF_OR | BPF_X:
 		emit(rv_or(rd, rd, rs), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_XOR | BPF_X:
 	case BPF_ALU64 | BPF_XOR | BPF_X:
 		emit(rv_xor(rd, rd, rs), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_MUL | BPF_X:
 	case BPF_ALU64 | BPF_MUL | BPF_X:
@@ -789,21 +799,29 @@ static int emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 	case BPF_ALU | BPF_LSH | BPF_X:
 	case BPF_ALU64 | BPF_LSH | BPF_X:
 		emit(is64 ? rv_sll(rd, rd, rs) : rv_sllw(rd, rd, rs), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_RSH | BPF_X:
 	case BPF_ALU64 | BPF_RSH | BPF_X:
 		emit(is64 ? rv_srl(rd, rd, rs) : rv_srlw(rd, rd, rs), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_ARSH | BPF_X:
 	case BPF_ALU64 | BPF_ARSH | BPF_X:
 		emit(is64 ? rv_sra(rd, rd, rs) : rv_sraw(rd, rd, rs), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 
 	/* dst = -dst */
 	case BPF_ALU | BPF_NEG:
 	case BPF_ALU64 | BPF_NEG:
 		emit(is64 ? rv_sub(rd, RV_REG_ZERO, rd) :
 		     rv_subw(rd, RV_REG_ZERO, rd), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 
 	/* dst = BSWAP##imm(dst) */
@@ -958,14 +976,20 @@ static int emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 	case BPF_ALU | BPF_LSH | BPF_K:
 	case BPF_ALU64 | BPF_LSH | BPF_K:
 		emit(is64 ? rv_slli(rd, rd, imm) : rv_slliw(rd, rd, imm), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_RSH | BPF_K:
 	case BPF_ALU64 | BPF_RSH | BPF_K:
 		emit(is64 ? rv_srli(rd, rd, imm) : rv_srliw(rd, rd, imm), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 	case BPF_ALU | BPF_ARSH | BPF_K:
 	case BPF_ALU64 | BPF_ARSH | BPF_K:
 		emit(is64 ? rv_srai(rd, rd, imm) : rv_sraiw(rd, rd, imm), ctx);
+		if (!is64)
+			emit_zext_32(rd, ctx);
 		break;
 
 	/* JUMP off */

arch/x86/net/bpf_jit_comp.c

@@ -186,9 +186,7 @@ struct jit_context {
 #define BPF_MAX_INSN_SIZE	128
 #define BPF_INSN_SAFETY		64
 
-#define AUX_STACK_SPACE		40 /* Space for RBX, R13, R14, R15, tailcnt */
-
-#define PROLOGUE_SIZE		37
+#define PROLOGUE_SIZE		20
 
 /*
  * Emit x86-64 prologue code for BPF program and check its size.
@@ -199,44 +197,19 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
 	u8 *prog = *pprog;
 	int cnt = 0;
 
-	/* push rbp */
-	EMIT1(0x55);
-
-	/* mov rbp,rsp */
-	EMIT3(0x48, 0x89, 0xE5);
-
-	/* sub rsp, rounded_stack_depth + AUX_STACK_SPACE */
-	EMIT3_off32(0x48, 0x81, 0xEC,
-		    round_up(stack_depth, 8) + AUX_STACK_SPACE);
-
-	/* sub rbp, AUX_STACK_SPACE */
-	EMIT4(0x48, 0x83, 0xED, AUX_STACK_SPACE);
-
-	/* mov qword ptr [rbp+0],rbx */
-	EMIT4(0x48, 0x89, 0x5D, 0);
-	/* mov qword ptr [rbp+8],r13 */
-	EMIT4(0x4C, 0x89, 0x6D, 8);
-	/* mov qword ptr [rbp+16],r14 */
-	EMIT4(0x4C, 0x89, 0x75, 16);
-	/* mov qword ptr [rbp+24],r15 */
-	EMIT4(0x4C, 0x89, 0x7D, 24);
-
+	EMIT1(0x55);             /* push rbp */
+	EMIT3(0x48, 0x89, 0xE5); /* mov rbp, rsp */
+	/* sub rsp, rounded_stack_depth */
+	EMIT3_off32(0x48, 0x81, 0xEC, round_up(stack_depth, 8));
+	EMIT1(0x53);             /* push rbx */
+	EMIT2(0x41, 0x55);       /* push r13 */
+	EMIT2(0x41, 0x56);       /* push r14 */
+	EMIT2(0x41, 0x57);       /* push r15 */
 	if (!ebpf_from_cbpf) {
-		/*
-		 * Clear the tail call counter (tail_call_cnt): for eBPF tail
-		 * calls we need to reset the counter to 0. It's done in two
-		 * instructions, resetting RAX register to 0, and moving it
-		 * to the counter location.
-		 */
-
-		/* xor eax, eax */
-		EMIT2(0x31, 0xc0);
-		/* mov qword ptr [rbp+32], rax */
-		EMIT4(0x48, 0x89, 0x45, 32);
-
+		/* zero init tail_call_cnt */
+		EMIT2(0x6a, 0x00);
 		BUILD_BUG_ON(cnt != PROLOGUE_SIZE);
 	}
-
 	*pprog = prog;
 }
 
@@ -281,13 +254,13 @@ static void emit_bpf_tail_call(u8 **pprog)
 	 * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
 	 *	goto out;
 	 */
-	EMIT2_off32(0x8B, 0x85, 36);              /* mov eax, dword ptr [rbp + 36] */
+	EMIT2_off32(0x8B, 0x85, -36 - MAX_BPF_STACK); /* mov eax, dword ptr [rbp - 548] */
 	EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT);     /* cmp eax, MAX_TAIL_CALL_CNT */
 #define OFFSET2 (30 + RETPOLINE_RAX_BPF_JIT_SIZE)
 	EMIT2(X86_JA, OFFSET2);                   /* ja out */
 	label2 = cnt;
 	EMIT3(0x83, 0xC0, 0x01);                  /* add eax, 1 */
-	EMIT2_off32(0x89, 0x85, 36);              /* mov dword ptr [rbp + 36], eax */
+	EMIT2_off32(0x89, 0x85, -36 - MAX_BPF_STACK); /* mov dword ptr [rbp -548], eax */
 
 	/* prog = array->ptrs[index]; */
 	EMIT4_off32(0x48, 0x8B, 0x84, 0xD6,       /* mov rax, [rsi + rdx * 8 + offsetof(...)] */
@@ -1036,19 +1009,14 @@ xadd:			if (is_imm8(insn->off))
 			seen_exit = true;
 			/* Update cleanup_addr */
 			ctx->cleanup_addr = proglen;
-			/* mov rbx, qword ptr [rbp+0] */
-			EMIT4(0x48, 0x8B, 0x5D, 0);
-			/* mov r13, qword ptr [rbp+8] */
-			EMIT4(0x4C, 0x8B, 0x6D, 8);
-			/* mov r14, qword ptr [rbp+16] */
-			EMIT4(0x4C, 0x8B, 0x75, 16);
-			/* mov r15, qword ptr [rbp+24] */
-			EMIT4(0x4C, 0x8B, 0x7D, 24);
-
-			/* add rbp, AUX_STACK_SPACE */
-			EMIT4(0x48, 0x83, 0xC5, AUX_STACK_SPACE);
-			EMIT1(0xC9); /* leave */
-			EMIT1(0xC3); /* ret */
+			if (!bpf_prog_was_classic(bpf_prog))
+				EMIT1(0x5B); /* get rid of tail_call_cnt */
+			EMIT2(0x41, 0x5F);   /* pop r15 */
+			EMIT2(0x41, 0x5E);   /* pop r14 */
+			EMIT2(0x41, 0x5D);   /* pop r13 */
+			EMIT1(0x5B);         /* pop rbx */
+			EMIT1(0xC9);         /* leave */
+			EMIT1(0xC3);         /* ret */
 			break;
 
 		default:

drivers/net/can/flexcan.c

@@ -166,7 +166,7 @@
 #define FLEXCAN_MB_CNT_LENGTH(x)	(((x) & 0xf) << 16)
 #define FLEXCAN_MB_CNT_TIMESTAMP(x)	((x) & 0xffff)
 
-#define FLEXCAN_TIMEOUT_US		(50)
+#define FLEXCAN_TIMEOUT_US		(250)
 
 /* FLEXCAN hardware feature flags
  *
@@ -1583,9 +1583,6 @@ static int flexcan_probe(struct platform_device *pdev)
 			dev_dbg(&pdev->dev, "failed to setup stop-mode\n");
 	}
 
-	dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
-		 priv->regs, dev->irq);
-
 	return 0;
 
  failed_register:

drivers/net/can/m_can/m_can.c

@@ -822,6 +822,27 @@ static int m_can_poll(struct napi_struct *napi, int quota)
 	if (!irqstatus)
 		goto end;
 
+	/* Errata workaround for issue "Needless activation of MRAF irq"
+	 * During frame reception while the MCAN is in Error Passive state
+	 * and the Receive Error Counter has the value MCAN_ECR.REC = 127,
+	 * it may happen that MCAN_IR.MRAF is set although there was no
+	 * Message RAM access failure.
+	 * If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is generated
+	 * The Message RAM Access Failure interrupt routine needs to check
+	 * whether MCAN_ECR.RP = ’1’ and MCAN_ECR.REC = 127.
+	 * In this case, reset MCAN_IR.MRAF. No further action is required.
+	 */
+	if ((priv->version <= 31) && (irqstatus & IR_MRAF) &&
+	    (m_can_read(priv, M_CAN_ECR) & ECR_RP)) {
+		struct can_berr_counter bec;
+
+		__m_can_get_berr_counter(dev, &bec);
+		if (bec.rxerr == 127) {
+			m_can_write(priv, M_CAN_IR, IR_MRAF);
+			irqstatus &= ~IR_MRAF;
+		}
+	}
+
 	psr = m_can_read(priv, M_CAN_PSR);
 	if (irqstatus & IR_ERR_STATE)
 		work_done += m_can_handle_state_errors(dev, psr);

drivers/net/can/spi/Kconfig

@@ -9,9 +9,10 @@ config CAN_HI311X
 	  Driver for the Holt HI311x SPI CAN controllers.
 
 config CAN_MCP251X
-	tristate "Microchip MCP251x SPI CAN controllers"
+	tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
 	depends on HAS_DMA
 	---help---
-	  Driver for the Microchip MCP251x SPI CAN controllers.
+	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
+	  controllers.
 
 endmenu