This is a fork from original project with some changes.
Please note that if you have firmware that doesn't open telnet, you can try --new flag and set mac-address of your NIC to 00:07:29:55:35:57
Current supported options:
./zteOnu -h
Flags:
-h, --help help for zteOnu
-i, --ip string ONU ip address (default "192.168.1.1")
--new Use new method to open telnet, MAC address must set to 00:07:29:55:35:57
-u, --user string Factory mode auth username (If not provided, a known list will be used)
-p, --pass string Factory mode auth password (If not provided, a known list will be used)
--port int ONU http port (default 80)
--seclvl int Security level for telnet access, if you got "Permission Denied", try 3.
Use with --telnet flag (default 2)
--telnet Enable permanent telnet (user: root, pass: Zte521)
--tp int ONU telnet port (default 23)
- Added all known user/password combinations in a loop; the binary will attempt all of them to enable Telnet.
- Added the --seclvl parameter (default: 2) to change the Telnet access level and avoid the "Access Denied" error.
- Added firewall configuration when enabling permanent Telnet access.
- Modify login retries up to 5 attempts.
- Changed to use the default HTTP port 80 instead of 8080.
| ONT | Firmware | Result | Issues |
|---|---|---|---|
| F601V6 | V6.0.10P6N7 (OpenFiber) | Open Telnet (with known OF credentials) | Permanent Telnet doesn't have full privileges |
| F601V6 | V6.0.10N40 (TIM) | Open Telnet | Permanent Telnet doesn't have full privileges |
| F601V7 | V7.0.10P6N7 (OpenFiber) | Open Telnet (with known OF credentials) | Permanent Telnet doesn't have full privileges |
| F601V9 | V9.0.10P2N1 (OpenFiber) | Open Telnet (with known OF credentials) | Permanent Telnet doesn't have full privileges |
| F6005V3 | V3.0.10P3N2 (OpenFiber) | Open Telnet (with known OF credentials) | |
| F6005V3 | V3.0.10N06 (TIM) | Open Telnet with --new flag and mac-addr changed |