NSPanel Custom with HA Blueprint

This project allows you to configure your complete NSPanel via a Blueprint with UI.

That means you don't have to customize any code or change any lines in the code.

So you have a nice graphical interface where you can build your NSPanel. And the best thing is, the installation takes only a few minutes.

The goal was to create a version that allows everyone to use the NSpanel fully local without having to deal with programming or reading hours of documentation - AND YES WE DID IT!!!! ;)

📕 Full documentation and installation is available here NSPanel Configuration, Setup and HowTo .

ℹ️ Version v2.0.0

NSPanel:

(Home and Buttonpage)

(Lightsettings - Brightness and TEMP Color)

(Colorwheel and Thermostat)

(Coversetting and Weather Forcast)

(NSPanel Settings and Boot Screen)

(HA Device Seeting for Example temperature correction)

Blueprint:

Features:

• easy to use and simple configuration via Blueprint - no change in the code is necessary
• 32 buttons on 4 button pages with long press function for settings (more buttons are also possible)
• Button design is automatically generated based on the selected entity
• Buttons show current brightness and cover position in the button itself
• Buttons label can be assigned via blueprint
• Weather + 5 days weather forcast
• Thermostat + Touch + Relay control for floor heating
• Light control (brightness-slider, colorwheel, TempColor-slider) - via Long Press
• Cover control (open, close, position-slider) - via long press
• Settings page (display brightness, display dim brightness, auto-dim, sleep mode, reboot NSPanel)
• Swipe between pages
• Top menu with 10 icons for specific states
• Heating control (hot water)
• modern design - design easy to change via Adobe Express (free + design template)
• 2 pysical switches
• and much more ;)

Pages

Home

• current weather with button to Weather Forcast page
• Hardware buttons can be freely assigned
• Hardware button label or without label
• Blue line indicates on or off of the entity
• Temperature outside
• Status icons at the top
• Room temperature with button to thermostat page
• Room humidity
• Hot water temperature
• Button to display settings page

Button Page

• 32 Button
• 4 Button pages
• Button design is automatically generated based on the selected entity
• Buttons show current brightness and cover position in the button itself
• Buttons label can be assigned via blueprint
• all buttons with long press function
• automatic detection by long press if it is a light or cover for submenu
• swipe between all pages
• swipe also down and up for fast access to certain pages

Light Settings

• Light current state
• Brightness Slider
• Colorwheel
• TempColor slider
• Jump back to the right button page

Cover Settings

• Open and close cover
• Cover position via slider
• Cover battery value if available (I use Ikea roller blind)
• jump back to the right button page

Thermostat

• Touch Temp control
• Outside temperature
• Hot water
• heating on, off and idle
• Hot water button

Weather Forcast

• 5 days Weather Forcast via swipe (Integration Accuweather - but should also go with another integration)
• Lowest and highest temperature outside
• Date
• Rain probability
• Sunshine hours
• Sun pressure
• Thunderstorm probability
• Wind speed
• Night thunderstorm probability and wind speed

Display Settings

• Restart NSPanel
• Sleep mode - display off after time X
• Display brightness slider
• Display dim brightness slider
• Status Brightness in %

Thanks to:

SmartHome Yourself: https://www.youtube.com/c/SmarthomeyourselfDe_DIY

Masto: https://github.com/masto/NSPanel-Demo-Files

Marcfager: https://github.com/marcfager/nspanel-mf

lovejoy77: https://github.com/lovejoy777/NSpanel

Hellis81: https://github.com/Hellis81/NS-panel