This project simulates bridges to publish your entities from Home Assistant to any Matter-compatible controller like Alexa, Apple Home or Google Home. Using Matter, those can be connected easily using local communication without the need of port forwarding etc.
As the holiday season approaches and my main job keeps me busy, I haven’t been able to dedicate as much time to this project as I’d like. Over the holidays, I’ll be taking a well-deserved break to recharge.
That said, if an opportunity arises, I’ll try to answer a few questions or review a pull request via my phone. I’m looking forward to returning refreshed and motivated in the new year.
Thank you for your understanding and continued support!
Happy holidays! 🎄
- Installation
- Configuration
- Bridge Configuration
- Frequently Asked Questions & Troubleshooting
- Supported Domains / Device Types
To successfully pair the bridge with your Controller (e.g. Alexa, Google Home, Apple Home) it is recommended to have IPv6 enabled in your local network. Additionally, it is not recommended to place both in different VLANs.
There were some users who got that working, but this can break any time due to
This application can be installed in three different ways:
- Home-Assistant AddOn for Home Assistant OS (preferred)
- Ready to use Docker Image
- Manual installation using
npm
Warning
Home Assistant AddOns can only be used with Home Assistant OS.
Simply add the following GitHub Repository URL to your Home Assistant AddOn Store.
- Open the UI of your Home Assistant instance
- Go to
Settings->Add-Ons->Add-On Store - Click the three dots in the top-right corner and select
Repositories - Paste the repository URL into the text-field and click "Add"
- Refresh your Add-On Store and Install the Add-On
- You can configure the log level and the port of the Web UI in the AddOn configuration page
This repository builds a docker image for every release. You can simply pull it with
docker pull ghcr.io/t0bst4r/home-assistant-matter-hub:latestIn the docker image the application stores its data in /data, so you can mount a volume there to
persist it, but you could change that by setting the HAMH_STORAGE_LOCATION variable.
Additionally, you have to configure the container as follows:
docker run -d \
# required: the address of your home assistant instance
-e HAMH_HOME_ASSISTANT_URL="http://192.168.178.123:8123/" \
# required: a long lived access token for your home assistant instance
-e HAMH_HOME_ASSISTANT_ACCESS_TOKEN="eyJ.....dlc" \
# optional: debug | info | warn | error
# default: info
-e HAMH_LOG_LEVEL="info" \
# optional: the port to use for the web ui
# default: 8482
-e HAMH_WEB_PORT=8482 \
# recommended: persist the configuration and application data
-v $PWD/home-assistant-matter-hub:/data \
# required due to restrictions in matter
--network=host \
ghcr.io/t0bst4r/home-assistant-matter-hub:latestWarning
Make sure your docker installation has IPv6 enabled, too. See this guide for more information.
If you are running docker on a NAS, make sure to enable IPv6 in the NAS settings, too.
If you want to install this application by hand, you simply need to run
npm install -g home-assistant-matter-hubTo start the application, run
home-assistant-matter-hub start \
# required: the address of your home assistant instance
# can be replaced with an environment variable: HAMH_HOME_ASSISTANT_URL
--home-assistant-url="http://192.168.178.123:8123/" \
# required: a long lived access token for your home assistant instance
# can be replaced with an environment variable: HAMH_HOME_ASSISTANT_ACCESS_TOKEN
--home-assistant-access-token="eyJ.....dlc" \
# optional: debug | info | warn | error
# default: info
# can be replaced with an environment variable: HAMH_LOG_LEVEL
--log-level=info \
# optional: the port to use for the web ui
# default: 8482
# can be replaced with an environment variable: HAMH_WEB_PORT
--web-port=8482The application will store its data in $HOME/.home-assistant-matter-hub. You can configure the storage path by
using the --storage-location=/path/to/storage option or HAMH_STORAGE_STORAGE environment variable.
Due to its advanced configuration options it is not possible to simply configure everything with environment variables or command line parameters. Therefore, bridges are configured within the application itself. General app configuration is done using the CI or environment variables. The following parameters are available:
home-assistant-matter-hub start
start the application
Options:
--help Show help [boolean]
--config Provide the path to a configuration JSON file, which can include all the other command options. You can use
kebabcase ("log-level") or camelcase ("logLevel").
--log-level [string] [choices: "silly", "debug", "info", "warn", "error"] [default: "info"]
--disable-log-colors [boolean] [default: false]
--storage-location Path to a directory where the application should store its data. Defaults to $HOME/.home-assistant-matter-h
ub [string]
--http-port, --web-port Port used by the web application. 'http-port' is recommended, 'web-port' is deprecated and will be removed
in the future. [number] [default: 8482]
--http-ip-whitelist Only allow the specified IPv4, IPv6 or CIDR. You can specify this option multiple times. When configured vi
a ENV variables, you can only specify ONE value. Defaults to allow every IP address. [array]
--mdns-network-interface Limit mDNS to this network interface [string]
--home-assistant-url The HTTP-URL of your Home Assistant URL [string] [required]
--home-assistant-access-token A long-lived access token for your Home Assistant Instance [string] [required]
Each of those configuration options can be configured via environment variables, too. Simply prefix them with HAMH_
and write them in capslock with underscores (e.g. HAMH_MDNS_NETWORK_INTERFACE).
Those configuration options are not needed for the Home Assistant Addon Installation type.
Using the User Interface you can set up multiple bridges and configure each to use different filters for your entities. Each bridge will be completely independent of the others and uses its own port for matter.
Note
You can use one bridge to connect to multiple controllers.
Warning
Alexa only supports port 5540. Therefore, you cannot create multiple bridges to connect with Alexa.
Every bridge has to have a name (string), port (number) and filter (object) property. The filter property has to
include an include (array) and an exclude (array) property.
{
"name": "My Hub",
"port": 5540,
"filter": {
"include": [],
"exclude": []
}
}A include- or exclude-item is an object having a type and a value property.
The type can be one of:
pattern- a pattern matching your entity idsdomain- the domain you want to include or excludeplatform- the integration you want to include or excludelabel- the slug of a label you want to include or excludearea- the slug of an area you want to include or exclude
The value property is a string containing the corresponding value. You can add multiple include or exclude rules which
are then combined.
All entities which match one of the include-rules will be included, but all entities which match one of the exclude
rules will be excluded.
Warning
When performing changes on entities, like adding or removing a label, you need to restart the matter-hub application for the changes to take effect, or you can edit the bridge and save it without any changes.
{
"name": "My Hub",
"port": 5540,
"filter": {
"include": [
{
"type": "label",
"value": "my_voice_assist"
},
{
"type": "pattern",
"value": "light.awesome*"
}
],
"exclude": [
{
"type": "platform",
"value": "hue"
},
{
"type": "domain",
"value": "fan"
}
]
}
}Warning
- Labels and areas in Home Assistant are technically represented by their "slugs".
- Slugs are technical identifiers used in the background.
- Slugs are always lowercase and only allow a-z and underscores, so everything else will be replaced with an underscore.
- Even when renaming a label or area, the slug doesn't change. Never.
You can retrieve the slug using the followiung templates in Home Assistant:
{{ labels() }}- returns all labels{{ labels("light.my_entity") }}- returns the labels of a specific entity{{ areas() }}- returns all areas
Please review the Documentation for more details and Frequently Asked Questions.
| Domain | Represented as Device Class | Comment |
|---|---|---|
| light | OnOffLight, DimmableLight, ColorTemperatureLight, ExtendedColorLight | Depends on the supported features attribute of the device. |
| switch | OnOffPlugInUnit | |
| lock | DoorLock | |
| fan | OnOffPlugInUnit | Fans are supported in the matter specification, but they are not yet supported by Voice Assistants like Alexa, Google or Apple. |
| binary_sensor | ContactSensor, OccupancySensor, WaterLeakDetector | All device-classes which are explicitly implemented, are mapped to contact sensor. Feel free to open a PR to improve this. Water Leak Detectors are not supported by every controller. |
| sensor | TemperatureSensor, HumiditySensor | Currently only Temperature and Humidity are supported. Feel free to open a PR to improve this. |
| cover | WindowCovering | |
| climate | Thermostat | |
| input_boolean | OnOffPlugInUnit | |
| script | OnOffPlugInUnit | |
| automation | OnOffPlugInUnit | |
| scene | OnOffPlugInUnit | |
| media_player | OnOffPlugInUnit | Media Players are not supported by most controllers. Therefore, they are exposed as on-off-plugin units. If you still want to try Speaker Devices with your controller, you can activate it using the Feature Flags in your Bridge configuration. |
| humidifier | OnOffPlugInUnit | Matter does not support humidifiers yet. Therefore, mapped to an OnOffPlugInUnit with Level Control. |
If you need more assistance on the topic, please have a look at the following external resources:
![@github-actions[bot]](https://avatars.githubusercontent.com/in/15368?s=64&v=4){kind=small}
![@renovate[bot]](https://avatars.githubusercontent.com/in/2740?s=64&v=4){kind=small}
