Avaliable at: http://pastebin.com/gFqTUvzM
Author: Tad DeVries [email protected]
Copyright (C) 2013-2014 Tad DeVries [email protected] http://tad.mit-license.org/2014
A Big Reactors control program that monitors multiple reactors and modifies their control rod settings based on the amount of energy stored in the internal buffer of the reactor. By default the program will check all the connected reactors every 5 seconds, when the internal buffer of a reactor is at or above 80% capacity the control rods will start to lower to slow the the reaction speed until their are at 100% inserted. Some basic information is displayed on the computer terminal while this program is running showing the status of connected reactors. Because of the limited space in a terminal only 16 reactors will be displayed.
This program should work by just placing a computer next to the computers port on a reactor. However I built this with the idea that multiple reactors would be connected via a wired computer network.
Connect a computer to the computer port on one or more reactors either directly or through a wired computer network. Name this program startup then reboot the computer.