TinyGo Drivers

This package provides a collection of hardware drivers for devices such as sensors and displays that can be used together with TinyGo.

Installing

go get tinygo.org/x/drivers

How to use

Here is an example in TinyGo that uses the BMP180 digital barometer:

package main

import (
    "time"

    "machine"

    "tinygo.org/x/drivers/bmp180"
)

func main() {
    machine.I2C0.Configure(machine.I2CConfig{})
    sensor := bmp180.New(machine.I2C0)
    sensor.Configure()

    connected := sensor.Connected()
    if !connected {
        println("BMP180 not detected")
        return
    }
    println("BMP180 detected")

    for {
        temp, _ := sensor.ReadTemperature()
        println("Temperature:", float32(temp)/1000, "°C")

        pressure, _ := sensor.ReadPressure()
        println("Pressure", float32(pressure)/100000, "hPa")

        time.Sleep(2 * time.Second)
    }
}

Currently supported devices

The following 80 devices are supported.

Device Name	Interface Type
ADT7410 I2C Temperature Sensor	I2C
ADXL345 accelerometer	I2C
AHT20 I2C Temperature and Humidity Sensor	I2C
AMG88xx 8x8 Thermal camera sensor	I2C
APA102 RGB LED	SPI
APDS9960 Digital proximity, ambient light, RGB and gesture sensor	I2C
AT24CX 2-wire serial EEPROM	I2C
AXP192 single Cell Li-Battery and Power System Management	I2C
BBC micro:bit LED matrix	GPIO
BH1750 ambient light sensor	I2C
BlinkM RGB LED	I2C
BME280 humidity/pressure sensor	I2C
BMI160 accelerometer/gyroscope	SPI
BMP180 barometer	I2C
BMP280 temperature/barometer	I2C
BMP388 pressure sensor	I2C
Buzzer	GPIO
DHTXX thermometer and humidity sensor	GPIO
DS1307 real time clock	I2C
DS3231 real time clock	I2C
ESP32 as WiFi Coprocessor with Arduino nina-fw	SPI
ESP8266/ESP32 AT Command set for WiFi/TCP/UDP	UART
FT6336 touch controller	I2C
GPS module	I2C/UART
HC-SR04 Ultrasonic distance sensor	GPIO
HD44780 LCD controller	GPIO/I2C
HTS221 digital humidity and temperature sensor	I2C
HUB75 RGB led matrix	SPI
software I2C driver	GPIO
ILI9341 TFT color display	SPI
INA260 Volt/Amp/Power meter	I2C
Infrared remote control	GPIO
IS31FL3731 matrix LED driver	I2C
4x4 Membrane Keypad	GPIO
L293x motor driver	GPIO/PWM
L9110x motor driver	GPIO/PWM
LIS2MDL magnetometer	I2C
LIS3DH accelerometer	I2C
LPS22HB MEMS nano pressure sensor	I2C
LSM6DS3 accelerometer	I2C
LSM6DSOX accelerometer	I2C
LSM6DS3TR accelerometer	I2C
LSM303AGR accelerometer	I2C
LSM9DS1 accelerometer	I2C
MAG3110 magnetometer	I2C
MAX7219 & MAX7221 display driver	SPI
MCP2515 Stand-Alone CAN Controller with SPI Interface	SPI
MCP3008 analog to digital converter (ADC)	SPI
MCP23017 port expander	I2C
Microphone - PDM	I2S/PDM
MMA8653 accelerometer	I2C
MPU6050 accelerometer/gyroscope	I2C
P1AM-100 Base Controller	SPI
PCD8544 display	SPI
PCF8563 real time clock	I2C
Resistive Touchscreen (4-wire)	GPIO
RTL8720DN 2.4G/5G Dual Bands Wireless and BLE5.0	UART
SCD4x CO2 Sensor	I2C
Semihosting	Debug
Servo	PWM
Shift register (PISO)	GPIO
Shift registers (SIPO)	GPIO
SHT3x Digital Humidity Sensor	I2C
SHTC3 Digital Humidity Sensor (RH/T)	I2C
SPI NOR Flash Memory	SPI/QSPI
SPI SDCARD/MMC	SPI
SSD1306 OLED display	I2C / SPI
SSD1331 TFT color display	SPI
SSD1351 OLED display	SPI
ST7735 TFT color display	SPI
ST7789 TFT color display	SPI
Stepper motor "Easystepper" controller	GPIO
Thermistor	ADC
TM1637 7-segment LED display	I2C
TMP102 I2C Temperature Sensor	I2C
UC8151 All-in-one driver IC for ESL	I2C
VEML6070 UV light sensor	I2C
VL53L1X time-of-flight distance sensor	I2C
Waveshare 2.13" (B & C) e-paper display	SPI
Waveshare 2.13" e-paper display	SPI
Waveshare 4.2" e-paper B/W display	SPI
WS2812 RGB LED	GPIO
XPT2046 touch controller	GPIO
Semtech SX126x Lora	SPI
SSD1289 TFT color display	GPIO

Contributing

Your contributions are welcome!

Please take a look at our CONTRIBUTING.md document for details.

License

This project is licensed under the BSD 3-clause license, just like the Go project itself.