This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32 (including ESP32-S2 and ESP32-C3), ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson

This is an ESP32 (including ESP32-S2 and ESP32-C3) / ESP8266 WiFi Connection Manager, using ESPAsyncWebServer, with fallback web configuration portal. Use this library for configuring ESP32, ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With ex…

Library using AsyncWebServer to configure MultiWiFi/Credentials at runtime for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Option…

Light-Weight MultiWiFi/Credentials Manager for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards boards. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. paragraph=Library to configure MultiWiFi/Credentials at runtime for ESP32/ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use mu…

ESP_DoubleResetDetector is a library for the ESP32/ESP8266 Arduino platform to enable trigger configure mode by resetting twice.

Light-Weight WiFi/Credentials Manager for AVR Mega, Teensy, SAM DUE, SAMD, STM32, etc. boards running U-Blox WiFiNINA modules/shields. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Now using WiFiMulti_Generic library

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at r…

Library to configure MultiWiFi/Credentials at runtime for Realtek RTL8720DN, RTL8722DM, RTM8722CSM, etc. boards.

Enable inclusion of both ESP32 Blynk BT / BLE and WiFi libraries. Then run both WiFi and BT/BLE simultaneously, or select one to use at runtime after reboot. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM.

"Library to configure MultiWiFi/Credentials at runtime for Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano RP2040 Connect, RASPBERRY_PI_PICO), AmebaD RTL8720DN, etc. boards, using Generic WiFi (WiFiNINA, WiFi101, ESP8266-AT, ESP32-AT, etc.) modules/shields. You can also specify DHCP HostName, static AP and STA IP.…

Simple WiFiManager for Blynk and ESP32 with or without SSL, configuration data saved in either SPIFFS or EEPROM. Enable inclusion of both ESP32 Blynk BT/BLE and WiFi libraries. Then select one at reboot or run both. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM. Using AsyncWebServer …

Library to detect a multi reset within a predetermined time, using RTC Memory, EEPROM, LittleFS or SPIFFS for ESP8266 and ESP32, ESP32_C3, ESP32_S2, ESP32_S3. An alternative start-up mode can be used. One example use is to allow re-configuration of device WiFi credentials

Library, now using AsyncWebServer instead of (ESP8266)WebServer, for enabling GSM/GPRS and WiFi running simultaneously as well as configuring/auto(re)connecting at runtime GSM shields to Internet and Blynk and ESP8266/ESP32 WiFi modules to best or available MultiWiFi APs and MultiBlynk servers. Enable adding dynamic custom parameters from sketch…

Light-Weight WiFi/Credentials Manager for AVR Mega, SAM DUE, SAMD21, SAMD51, nRF52, STM32, RP2040-based RASPBERRY_PI_PICO, etc. boards running WizFi360ESP8266/ESP32-AT-command shields with web configuration portal. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. You can also specify static AP and STA IP

Library for configuring/auto(re)connecting W5100/W5200/W5500, ENC28J60 and built-in LAN8742A / LAN8720 Ethernet at runtime using Config Portal. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic pa…

ESP32 + LwIP W5500, including ESP32-S2, ESP32-S3 and ESP32-C3, Connection and Credentials Manager using AsyncWebServer, with enhanced GUI and fallback Web ConfigPortal

MultiWiFi/Credentials Manager for RP2040W boards using built-in CYW43439 WiFi. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Library to configure MultiWiFi/Credentials at runtime for RP2040W boards, using CYW43439 WiFi. You can also specify DHCP HostName and STA IP. Use much less memory compared to full-fledge Wi…

Dynamic HTML(dynaHTML) is a dynamic form generator. After designing a few sensors and project around an ESP8266, I decided to turn my hard coded html into this.

ESP32 + LwIP ENC28J60, including ESP32-S2, ESP32-S3 and ESP32-C3, Connection and Credentials Manager using AsyncWebServer, with enhanced GUI and fallback Web ConfigPortal