Skip to content

C library for prototyping and experimenting with quantum-resistant cryptography

License

Notifications You must be signed in to change notification settings

tresorit/liboqs

 
 

Repository files navigation

CircleCI: Build status image, TravisCI: Build Status

liboqs

liboqs is an open source C library for quantum-safe cryptographic algorithms.

Overview

liboqs provides:

  • a collection of open source implementations of quantum-safe key encapsulation mechanism (KEM) and digital signature algorithms; the full list can be found below
  • a common API for these algorithms
  • a test harness and benchmarking routines

liboqs is part of the Open Quantum Safe (OQS) project, which aims to develop and integrate into applications quantum-safe cryptography to facilitate deployment and testing in real world contexts. In particular, OQS provides prototype integrations of liboqs into protocols like TLS, X.509, and S/MIME, through our OpenSSL 3 Provider and we provide a variety of other post-quantum-enabled demos.

The OQS project is supported by the Post-Quantum Cryptography Alliance as part of the Linux Foundation. More information about the Open Quantum Safe project can be found at openquantumsafe.org.

Status

Supported Algorithms

Details on each supported algorithm can be found in the docs/algorithms folder.

The list below indicates all algorithms currently supported by liboqs, including experimental algorithms and already excluding algorithm variants pruned during the NIST competition, such as Kyber-90s or Dilithium-AES.

The only algorithms in liboqs that implement NIST standards drafts are the ML-KEM and ML-DSA variants with their respective different bit strengths. liboqs will retain these algorithm names selected by NIST throughout the finishing stages of the standardization process, so users can rely on their presence going forward. If NIST changes the implementation details of these algorithms, liboqs will adjust the implementation so that users are protected from such potential changes. For users interested in explicitly selecting the current "proposed draft standard" code, the variants with the suffix "-ipd" are made available. At this stage, "ml-kem-ipd" and "ml-kem" as well as "ml-dsa-ipd" and "ml-dsa" are functionally equivalent, denoted by the "alias" moniker below.

Falcon and SPHINCS+ have also been selected for standardization, but the liboqs implementations of these algorithms are currently tracking Round 3 submissions and not NIST standards drafts.

All names other than ML-KEM and ML-DSA are subject to change. liboqs makes available a selection mechanism for algorithms on the NIST standards track, continued NIST competition, or purely experimental nature by way of the configuration variable OQS_ALGS_ENABLED. By default liboqs is built supporting all, incl. experimental, PQ algorithms listed below.

Key encapsulation mechanisms

  • BIKE: BIKE-L1, BIKE-L3, BIKE-L5
  • Classic McEliece: Classic-McEliece-348864†, Classic-McEliece-348864f†, Classic-McEliece-460896†, Classic-McEliece-460896f†, Classic-McEliece-6688128†, Classic-McEliece-6688128f†, Classic-McEliece-6960119†, Classic-McEliece-6960119f†, Classic-McEliece-8192128†, Classic-McEliece-8192128f†
  • FrodoKEM: FrodoKEM-640-AES, FrodoKEM-640-SHAKE, FrodoKEM-976-AES, FrodoKEM-976-SHAKE, FrodoKEM-1344-AES, FrodoKEM-1344-SHAKE
  • HQC: HQC-128, HQC-192, HQC-256
  • Kyber: Kyber512, Kyber768, Kyber1024
  • ML-KEM: ML-KEM-512-ipd (alias: ML-KEM-512), ML-KEM-768-ipd (alias: ML-KEM-768), ML-KEM-1024-ipd (alias: ML-KEM-1024)
  • NTRU-Prime: sntrup761

Signature schemes

  • CRYSTALS-Dilithium: Dilithium2, Dilithium3, Dilithium5
  • Falcon: Falcon-512, Falcon-1024, Falcon-padded-512, Falcon-padded-1024
  • ML-DSA: ML-DSA-44-ipd (alias: ML-DSA-44), ML-DSA-65-ipd (alias: ML-DSA-65), ML-DSA-87-ipd (alias: ML-DSA-87)
  • SPHINCS+-SHA2: SPHINCS+-SHA2-128f-simple, SPHINCS+-SHA2-128s-simple, SPHINCS+-SHA2-192f-simple, SPHINCS+-SHA2-192s-simple, SPHINCS+-SHA2-256f-simple, SPHINCS+-SHA2-256s-simple
  • SPHINCS+-SHAKE: SPHINCS+-SHAKE-128f-simple, SPHINCS+-SHAKE-128s-simple, SPHINCS+-SHAKE-192f-simple, SPHINCS+-SHAKE-192s-simple, SPHINCS+-SHAKE-256f-simple, SPHINCS+-SHAKE-256s-simple

Note that for algorithms marked with a dagger (†), liboqs contains at least one implementation that uses a large amount of stack space; this may cause failures when run in threads or in constrained environments. For more information, consult the algorithm information sheets in the docs/algorithms folder.

Limitations and Security

While at the time of this writing there are no vulnerabilities known in any of the quantum-safe algorithms used in this library, caution is advised when deploying quantum-safe algorithms as most of the algorithms and software have not been subject to the same degree of scrutiny as for currently deployed algorithms. Particular attention should be paid to guidance provided by the standards community, especially from the NIST Post-Quantum Cryptography Standardization project. As research advances, the supported algorithms may see rapid changes in their security, and may even prove insecure against both classical and quantum computers. Moreover, note that the sntrup761 is only included for interop testing.

liboqs does not intend to "pick winners": algorithm support is informed by the NIST PQC standardization project. We strongly recommend that applications and protocols rely on the outcomes of this effort when deploying post-quantum cryptography.

We realize some parties may want to deploy quantum-safe cryptography prior to the conclusion of the NIST PQC standardization project. We strongly recommend such attempts make use of so-called hybrid cryptography, in which quantum-safe public-key algorithms are used alongside traditional public key algorithms (like RSA or elliptic curves) so that the solution is at least no less secure than existing traditional cryptography.

WE DO NOT CURRENTLY RECOMMEND RELYING ON THIS LIBRARY IN A PRODUCTION ENVIRONMENT OR TO PROTECT ANY SENSITIVE DATA. This library is meant to help with research and prototyping. While we make a best-effort approach to avoid security bugs, this library has not received the level of auditing and analysis that would be necessary to rely on it for high security use.

Platform limitations

In order to optimize support effort,

  • not all algorithms are equally well supported on all platforms. In case of questions, it is first advised to review the documentation files for each algorithm.
  • not all compilers are equally well supported. For example, at least v7.1.0 of the GNU compiler is required.

Quickstart

Linux and Mac

  1. Install dependencies:

    On Ubuntu:

      sudo apt install astyle cmake gcc ninja-build libssl-dev python3-pytest python3-pytest-xdist unzip xsltproc doxygen graphviz python3-yaml valgrind
    

    On macOS, using a package manager of your choice (we've picked Homebrew):

     brew install cmake ninja openssl@3 wget doxygen graphviz astyle valgrind
     pip3 install pytest pytest-xdist pyyaml
    

    Note that, if you want liboqs to use OpenSSL for various symmetric crypto algorithms (AES, SHA-2, etc.) then you must have OpenSSL installed (version 3.x recommended; EOL version 1.1.1 also still possible).

  2. Get the source:

     git clone -b main https://github.com/open-quantum-safe/liboqs.git
     cd liboqs
    

    and build:

     mkdir build && cd build
     cmake -GNinja ..
     ninja
    

Various cmake build options to customize the resultant artifacts are available and are documented in CONFIGURE.md. All supported options are also listed in the .CMake/alg-support.cmake file, and can be viewed by running cmake -LAH .. in the build directory.

The following instructions assume we are in build.

  1. By default the main build result is lib/liboqs.a, a static library. If you want to build a shared/dynamic library, append -DBUILD_SHARED_LIBS=ON to the cmake -GNinja .. command above and the result will be lib/liboqs.so|dylib|dll. The public headers are located in the include directory. There are also a variety of programs built under the tests directory:

    • test_kem: Simple test harness for key encapsulation mechanisms
    • test_sig: Simple test harness for key signature schemes
    • test_kem_mem: Simple test harness for checking memory consumption of key encapsulation mechanisms
    • test_sig_mem: Simple test harness for checking memory consumption of key signature schemes
    • kat_kem: Program that generates known answer test (KAT) values for key encapsulation mechanisms using the same procedure as the NIST submission requirements, for checking against submitted KAT values using tests/test_kat.py
    • kat_sig: Program that generates known answer test (KAT) values for signature schemes using the same procedure as the NIST submission requirements, for checking against submitted KAT values using tests/test_kat.py
    • speed_kem: Benchmarking program for key encapsulation mechanisms; see ./speed_kem --help for usage instructions
    • speed_sig: Benchmarking program for signature mechanisms; see ./speed_sig --help for usage instructions
    • example_kem: Minimal runnable example showing the usage of the KEM API
    • example_sig: Minimal runnable example showing the usage of the signature API
    • test_aes, test_sha3: Simple test harnesses for crypto sub-components
    • test_portability: Simple test harnesses for checking cross-CPU code portability; requires presence of qemu; proper operation validated only on Ubuntu

    The complete test suite can be run using

     ninja run_tests
    
  2. To generate HTML documentation of the API, run:

     ninja gen_docs
    

    Then open docs/html/index.html in your web browser.

  3. ninja install can be run to install the built library and include files to a location of choice, which can be specified by passing the -DCMAKE_INSTALL_PREFIX=<dir> option to cmake at configure time. Alternatively, ninja package can be run to create an install package.

  4. ninja uninstall can be run to remove all installation files.

Windows

Binaries can be generated using Visual Studio 2019 with the CMake Tools extension installed. The same options as explained above for Linux/macOS can be used and build artifacts are generated in the specified build folders.

If you want to create Visual Studio build files, e.g., if not using ninja, be sure to not pass the parameter -GNinja to the cmake command as exemplified above. You can then build all components using msbuild, e.g. as follows: msbuild ALL_BUILD.vcxproj and install all artifacts e.g. using this command msbuild INSTALL.vcxproj.

Cross compilation

You can cross compile liboqs for various platforms. Detailed information is available in the Wiki.

Documentation

More detailed information on building, optional build parameters, example applications, coding conventions and more can be found in the wiki.

Contributing

Contributions that meet the acceptance criteria are gratefully welcomed. See our Contributing Guide for more details.

License

liboqs is licensed under the MIT License; see LICENSE.txt for details.

liboqs includes some third party libraries or modules that are licensed differently; the corresponding subfolder contains the license that applies in that case. In particular:

  • .CMake/CMakeDependentOption.cmake: BSD 3-Clause License
  • src/common/common.c: includes portions which are Apache License v2.0
  • src/common/crypto/aes/aes_c.c: public domain or any OSI-approved license
  • src/common/crypto/aes/aes*_ni.c: public domain
  • src/common/crypto/sha2/sha2_c.c: public domain
  • src/common/crypto/sha3/xkcp_low : CC0 (public domain), except brg_endian.h and KeccakP-1600-AVX2.s
  • src/common/crypto/sha3/xkcp_low/.../brg_endian.h : BSD 3-Clause License
  • src/common/crypto/sha3/xkcp_low/.../KeccakP-1600-AVX2.s : BSD-like CRYPTOGAMS license
  • src/common/rand/rand_nist.c: See file
  • src/kem/bike/additional: Apache License v2.0
  • src/kem/classic_mceliece/pqclean_*: public domain
  • src/kem/kyber/pqcrystals-*: public domain (CC0) or Apache License v2.0
  • src/kem/kyber/pqclean_*: public domain (CC0), and public domain (CC0) or Apache License v2.0, and public domain (CC0) or MIT, and MIT
  • src/kem/ml_kem/pqcrystals-*: public domain (CC0) or Apache License v2.0
  • src/sig/dilithium/pqcrystals-*: public domain (CC0) or Apache License v2.0
  • src/sig/dilithium/pqclean_*: public domain (CC0), and public domain (CC0) or Apache License v2.0, and public domain (CC0) or MIT, and MIT
  • src/sig/falcon/pqclean_*_aarch64 : Apache License v2.0
  • src/sig/ml_dsa/pqcrystals-*: public domain (CC0) or Apache License v2.0
  • src/sig/sphincs/pqclean_*: CC0 (public domain)

Acknowledgements

The OQS project is supported by the Post-Quantum Cryptography Alliance as part of the Linux Foundation.

The OQS project was founded by Douglas Stebila and Michele Mosca at the University of Waterloo. Contributors to liboqs include individual contributors, academics and researchers, and various companies, including Amazon Web Services, Cisco Systems, evolutionQ, IBM Research, Microsoft Research, SandboxAQ, and softwareQ.

Financial support for the development of Open Quantum Safe has been provided by Amazon Web Services, the Canadian Centre for Cyber Security, Cisco, the Unitary Fund, the NGI Assure Fund, and VeriSign Inc.

Research projects which developed specific components of OQS have been supported by various research grants, including funding from the Natural Sciences and Engineering Research Council of Canada (NSERC); see the source papers for funding acknowledgments.

About

C library for prototyping and experimenting with quantum-resistant cryptography

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 55.7%
  • Assembly 42.3%
  • CMake 1.0%
  • Python 0.5%
  • PHP 0.3%
  • C++ 0.1%
  • Shell 0.1%