Based on the Sofle for Michi board with Via support and modified encoders.

To compile:

• First configure qmk on a conda environment, and specify the folder with qmk setup -H <path>. See docs here: https://docs.qmk.fm/#/newbs_getting_started
• Replace /qmk/keyboards/sofle with this repo's sofle folder (You can clone the repo anywhere and then create a ln -s like this: lrwxrwxrwx 1 urshulgi urshulgi 46 May 6 21:34 sofle -> /home/urshulgi/github-projects/qmk_sofle/sofle)
• Now run the command qmk compile -kb sofle -km via -e CONVERT_TO=michi
• The compiled .uf2 file will be available inside qmk's folder root as sofle_rev1_via_michi.uf2
• In order to install this file, disconnect the USB C cable, then disconnect both halfs of the keyboard, and with one half at a time:
  • Press the reset button under the display, keep it pressed, and plug the keyboard into the PC with USB C
  • An usb drive will appear in the computer; so now drag and drop the uf2 file into the root folder of the flash drive
  • Now the device will reboot itself after its done installing, and the flash drive will disappear. After the keyboard reboots, disconnect from the computer
  • Now repeat with the other half
• After doing this, the keyboard is flashed and the config can be modified with VIA.