Repo cleanup (base#59)

* Move environment config to separate .env file

* Remove volumes config (already in README)

* Tabs vs spaces

* README cleanup

* Update README to mention .env file

.env.goerli

@@ -0,0 +1,26 @@
+OP_GETH_GENESIS_FILE_PATH=goerli/genesis-l2.json
+OP_GETH_SEQUENCER_HTTP=https://goerli-sequencer.base.org
+# OP_GETH_ETH_STATS=nodename:secret@host:port # optional
+
+OP_NODE_L1_ETH_RPC=https://ethereum-goerli-rpc.allthatnode.com # [recommended] replace with your preferred L1 (Ethereum, not Base) node RPC URL
+OP_NODE_L2_ENGINE_AUTH=/tmp/engine-auth-jwt
+OP_NODE_L2_ENGINE_AUTH_RAW=688f5d737bad920bdfb2fc2f488d6b6209eebda1dae949a8de91398d932c517a # for localdev only
+OP_NODE_L2_ENGINE_RPC=http://geth:8551
+OP_NODE_LOG_LEVEL=info
+OP_NODE_METRICS_ADDR=0.0.0.0
+OP_NODE_METRICS_ENABLED=true
+OP_NODE_METRICS_PORT=7300
+OP_NODE_P2P_AGENT=base
+OP_NODE_P2P_BOOTNODES=enr:-J64QBbwPjPLZ6IOOToOLsSjtFUjjzN66qmBZdUexpO32Klrc458Q24kbty2PdRaLacHM5z-cZQr8mjeQu3pik6jPSOGAYYFIqBfgmlkgnY0gmlwhDaRWFWHb3BzdGFja4SzlAUAiXNlY3AyNTZrMaECmeSnJh7zjKrDSPoNMGXoopeDF4hhpj5I0OsQUUt4u8uDdGNwgiQGg3VkcIIkBg,enr:-J64QAlTCDa188Hl1OGv5_2Kj2nWCsvxMVc_rEnLtw7RPFbOfqUOV6khXT_PH6cC603I2ynY31rSQ8sI9gLeJbfFGaWGAYYFIrpdgmlkgnY0gmlwhANWgzCHb3BzdGFja4SzlAUAiXNlY3AyNTZrMaECkySjcg-2v0uWAsFsZZu43qNHppGr2D5F913Qqs5jDCGDdGNwgiQGg3VkcIIkBg
+OP_NODE_P2P_LISTEN_IP=0.0.0.0
+OP_NODE_P2P_LISTEN_TCP_PORT=9222
+OP_NODE_P2P_LISTEN_UDP_PORT=9222
+OP_NODE_ROLLUP_CONFIG=goerli/rollup.json
+OP_NODE_RPC_ADDR=0.0.0.0
+OP_NODE_RPC_PORT=8545
+OP_NODE_SNAPSHOT_LOG=/tmp/op-node-snapshot-log
+OP_NODE_VERIFIER_L1_CONFS=4
+# OP_NODE_L1_TRUST_RPC allows for faster syncing, but should be used *only* if your L1 RPC node
+# is fully trusted.  It also allows op-node to work with clients such as Erigon that do not
+# support storage proofs.
+# OP_NODE_L1_TRUST_RPC=true

README.md

@@ -49,7 +49,7 @@ If you encounter problems with your node, please open a [GitHub issue](https://g
 
 ### Usage
 
-1. Ensure you have an Ethereum Goerli L1 full node RPC available (not Base Goerli), and set `OP_NODE_L1_ETH_RPC` (in `docker-compose.yml` if using docker-compose). If running your own L1 node, it needs to be synced before Base will be able to fully sync.
+1. Ensure you have an Ethereum L1 full node RPC available (not Base), and set `OP_NODE_L1_ETH_RPC` (in the `.env.*` file if using docker-compose). If running your own L1 node, it needs to be synced before Base will be able to fully sync.
 2. Run:
 
 ```

docker-compose.yml

@@ -7,14 +7,8 @@ services:
       - 30303:30303
       - 7301:6060 # metrics
     command: [ "sh", "./geth-entrypoint" ]
-    volumes:
-      - "./geth-data:/data"
-    environment:
-      - OP_GETH_GENESIS_FILE_PATH=goerli/genesis-l2.json
-      - OP_GETH_SEQUENCER_HTTP=https://goerli-sequencer.base.org
-      - OP_NODE_L2_ENGINE_AUTH=/tmp/engine-auth-jwt
-      - OP_NODE_L2_ENGINE_AUTH_RAW=688f5d737bad920bdfb2fc2f488d6b6209eebda1dae949a8de91398d932c517a # for localdev only
-      # - OP_GETH_ETH_STATS=nodename:secret@host:port # optional
+    env_file:
+      - .env.goerli
   node:
     build: .
     depends_on:
@@ -25,26 +19,5 @@ services:
       - 7300:7300 # metrics
       - 6060:6060
     command: [ "sh", "./op-node-entrypoint" ]
-    environment:
-      - OP_NODE_L1_ETH_RPC=https://ethereum-goerli-rpc.allthatnode.com # [recommended] replace with your preferred L1 (ethereum, not Base) node RPC URL
-      - OP_NODE_L2_ENGINE_AUTH=/tmp/engine-auth-jwt
-      - OP_NODE_L2_ENGINE_AUTH_RAW=688f5d737bad920bdfb2fc2f488d6b6209eebda1dae949a8de91398d932c517a # for localdev only
-      - OP_NODE_L2_ENGINE_RPC=http://geth:8551
-      - OP_NODE_LOG_LEVEL=info
-      - OP_NODE_METRICS_ADDR=0.0.0.0
-      - OP_NODE_METRICS_ENABLED=true
-      - OP_NODE_METRICS_PORT=7300
-      - OP_NODE_P2P_AGENT=base
-      - OP_NODE_P2P_BOOTNODES=enr:-J64QBbwPjPLZ6IOOToOLsSjtFUjjzN66qmBZdUexpO32Klrc458Q24kbty2PdRaLacHM5z-cZQr8mjeQu3pik6jPSOGAYYFIqBfgmlkgnY0gmlwhDaRWFWHb3BzdGFja4SzlAUAiXNlY3AyNTZrMaECmeSnJh7zjKrDSPoNMGXoopeDF4hhpj5I0OsQUUt4u8uDdGNwgiQGg3VkcIIkBg,enr:-J64QAlTCDa188Hl1OGv5_2Kj2nWCsvxMVc_rEnLtw7RPFbOfqUOV6khXT_PH6cC603I2ynY31rSQ8sI9gLeJbfFGaWGAYYFIrpdgmlkgnY0gmlwhANWgzCHb3BzdGFja4SzlAUAiXNlY3AyNTZrMaECkySjcg-2v0uWAsFsZZu43qNHppGr2D5F913Qqs5jDCGDdGNwgiQGg3VkcIIkBg
-      - OP_NODE_P2P_LISTEN_IP=0.0.0.0
-      - OP_NODE_P2P_LISTEN_TCP_PORT=9222
-      - OP_NODE_P2P_LISTEN_UDP_PORT=9222
-      - OP_NODE_ROLLUP_CONFIG=goerli/rollup.json
-      - OP_NODE_RPC_ADDR=0.0.0.0
-      - OP_NODE_RPC_PORT=8545
-      - OP_NODE_SNAPSHOT_LOG=/tmp/op-node-snapshot-log
-      - OP_NODE_VERIFIER_L1_CONFS=4
-#     OP_NODE_L1_TRUST_RPC allows for faster syncing, but should be used *only* if your L1 RPC node
-#     is fully trusted.  It also allows op-node to work with clients such as Erigon that do not
-#     support storage proofs.
-#     - OP_NODE_L1_TRUST_RPC=true
+    env_file:
+      - .env.goerli

geth-entrypoint

@@ -53,9 +53,9 @@ fi
 	--ws.port="$WS_PORT" \
 	--ws.origins="*" \
 	--ws.api=debug,eth,txpool,net,engine \
-  --metrics \
-  --metrics.addr=0.0.0.0 \
-  --metrics.port="$METRICS_PORT" \
+	--metrics \
+	--metrics.addr=0.0.0.0 \
+	--metrics.port="$METRICS_PORT" \
 	--syncmode=full \
 	--gcmode=archive \
 	--nodiscover \