ASUS Z690 ProArt Creator WiFi-Hackintosh-OC8.0

ASUS Z690 ProArt Creator WiFi Hackintosh-macOS Monterey-OpenCore

Configuration

硬件配置 / Specifications:

Motherboard：ASUS Z690 ProArt Creator WiFi CPU：Intel i9-12900K RAM：Kingston Fury beast DDR5 5600 32GB X2 GPU：Radeon™ RX 6900 XT 16G SSD：WD BK SN850 1TB

BIOS高级模式 / ASUS Z690 ProArt Creator WiFi BIOS Advanced Mode

Open Bios Complete list

• In the default EZ Mode screen, enable XMP, then select Advanced Mode (F7) as shown

BIOS设定 / ASUS Z690 ProArt Creator WiFi BIOS Setting

• Exit → Load Optimized Defaults
• Ai Tweaker
  • Ai Overclock Tuner → XMP I (or select XMP II to test different memory overclock modes)
• Advanced → CPU Configuration
  • Option 1: To enable all cores, all threads, but limit max CPU frequency to that of E-cores
    • Active Performance Cores → All
    • Active Efficient Cores → All
    • Hyper-Threading → Enabled
  • Option 2: To disable E-cores for maximum P-core frequencies
    • Active Performance Cores → All
    • Active Efficient Cores → 0
    • Hyper-Threading → Enabled
• Advanced → System Agent Configuration
  • VT-d → Enabled
• Advanced → System Agent Configuration → Memory Configuration
  • Memory Remap → Enabled (enables Above 4G Decoding)
• Advanced → System Agent Configuration → Graphics
  • Primary Display → PEG Slot
  • iGPU Multi Monitor → Disabled (optionally, this can be enabled)
• Advanced → Thunderbolt Configuration
  • PCIE Tunneling over USB4 → Enabled
  • Discrete Thunderbolt(TM) Support → Enabled
  • Wake From Thunderbolt(TM) Devices → Enabled
• Advanced → Thunderbolt Configuration → Discrete Thunderbolt(TM) Configuration
  • DTBT Go2Sx Command → Enabled
  • Windows 10 Thunderbolt support → Enable + RTD3
• Advanced → Trusted Computing
  • Security Device Support → Enable
• Advanced → PCI Subsystem Settings
  • Re-Size BAR Support → Enabled (if your GPU supports it) or it can be Disabled
    • If Enabled, set ResizeAppleGpuBars to 0 in Booter section of config.plist
• Advanced → USB Configuration
  • XHCI Hand-off → Enabled
• Advanced → Network Stack Configuration
  • Network Stack → Disabled
• Advanced → Onboard Devices Configuration
  • HD Audio → Enabled
  • Intel LAN → Enabled
  • MARVELL 10G LAN → Enabled
  • USB power delivery in Soft Off state (S5) → Enabled (can be Disabled to turn off USB devices)
  • Wi-Fi Controller → Disabled (to use Intel WiFi set to Enabled)
  • Bluetooth Controller → Disabled (to use Intel Bluetooth set to Enabled)
  • Serial Port Configuration → Disabled
• Boot → Boot Option Priorities
  • If there are multiple bootable disks in the system, configure the boot priority order
• Boot → CSM (Compatibility Support Module)
  • Launch CSM → Disabled
• Boot → Secure Boot
  • OS Type → Other
  • Secure Boot Mode → Custom
• Boot → Boot Configuration
  • Fast Boot → Enabled (or choose Disabled)
• Tool → ASUS User Profile
  • Profile Name → (Enter name of profile in order to save current BIOS configuration)
  • Save to Profile → (Up to 8 profiles can be saved)
• Exit
  • Save Changes & Reset (choose this option when BIOS configuration is done)

Short List:

From default EZ Mode screen, enable X.M.P. then select Advanced Mode (F7) as shown: BIOS 01 EZ Mode.jpg

• Exit → Load Optimized Defaults
• Advanced → CPU Configuration
  • Option 1: To enable all cores, all threads, but limit max CPU frequency to that of E-cores
    • Active Performance Cores → All
    • Active Efficient Cores → All
    • Hyper-Threading → Enabled
  • Option 2: To disable E-cores for maximum P-core frequencies
    • Active Performance Cores → All
    • Active Efficient Cores → 0
    • Hyper-Threading → Enabled
• Advanced → System Agent Configuration
  • VT-d → Enabled
• Advanced → System Agent Configuration → Graphics
  • Primary Display → PEG Slot
  • iGPU Multi Monitor → Disabled (optionally, this can be enabled)
• Advanced → PCI Subsystem Settings
  • Re-Size BAR Support → Enabled (if your GPU supports it) or it can be Disabled
    • If Enabled, set ResizeAppleGpuBars to 0 in Booter section of config.plist
• Advanced → Onboard Devices Configuration
  • Wi-Fi Controller → Disabled (to use Intel WiFi set to Enabled)
  • Bluetooth Controller → Disabled (to use Intel Bluetooth set to Enabled)
  • Serial Port Configuration → Disabled
• Boot → Boot Option Priorities
  • If there are multiple bootable disks in the system, configure the boot priority order
• Boot → Secure Boot
  • OS Type → Other
  • Secure Boot Mode → Custom
• Boot → Boot Configuration
  • Fast Boot → Enabled (or choose Disabled)
• Tool → ASUS User Profile
  • Profile Name → (Enter name of profile in order to save current BIOS configuration)
  • Save to Profile → (Up to 8 profiles can be saved)
• Exit
  • Save Changes & Reset (choose this option when BIOS configuration is done)
• Exit → Load Optimized Defaults