Added some example device profiles

xpcom-bsd · Jan 17, 2023 · dc3bbd4 · dc3bbd4
1 parent 0f39771
commit dc3bbd4
Show file tree

Hide file tree

Showing 2 changed files with 123 additions and 1 deletion.
diff --git a/docs/DeviceProfiles.md b/docs/DeviceProfiles.md
@@ -53,4 +53,4 @@ To change the device profile, navigate to the "Device Manager" and selected the
 ]
 ```
 
-The json file can contain multiple profiles. Each profile requires a name and different parameters. If one parameter is not set, the default value, as compiled into the firmware is used. The example above shows all the currently supported values. Others may follow.
+The json file can contain multiple profiles. Each profile requires a name and different parameters. If one parameter is not set, the default value, as compiled into the firmware is used. The example above shows all the currently supported values. Others may follow. A sample file with a lot of boards can be found [here](pin_mapping.json). This means you can just flash the generic bin file and upload the pin_mapping.json file. Then you select your board and everything works hopyfully as expected.
diff --git a/docs/pin_mapping.json b/docs/pin_mapping.json
@@ -0,0 +1,122 @@
+[
+    {
+        "name": "Generic NodeMCU 38 pin",
+        "nrf24": {
+            "miso": 19,
+            "mosi": 23,
+            "clk": 18,
+            "irq": 16,
+            "en": 4,
+            "cs": 5
+        },
+        "eth": {
+            "enabled": false,
+            "phy_addr": -1,
+            "power": -1,
+            "mdc": -1,
+            "mdio": -1,
+            "type": -1,
+            "clk_mode": -1
+        }
+    },
+    {
+        "name": "Olimex ESP32-POE",
+        "nrf24": {
+            "miso": 15,
+            "mosi": 2,
+            "clk": 14,
+            "irq": 13,
+            "en": 16,
+            "cs": 5
+        },
+        "eth": {
+            "enabled": true,
+            "phy_addr": 0,
+            "power": 12,
+            "mdc": 23,
+            "mdio": 18,
+            "type": 0,
+            "clk_mode": 3
+        }
+    },
+    {
+        "name": "Olimex ESP32-EVB",
+        "nrf24": {
+            "miso": 15,
+            "mosi": 2,
+            "clk": 14,
+            "irq": 13,
+            "en": 16,
+            "cs": 17
+        },
+        "eth": {
+            "enabled": true,
+            "phy_addr": 0,
+            "power": 12,
+            "mdc": 23,
+            "mdio": 18,
+            "type": 0,
+            "clk_mode": 0
+        }
+    },
+    {
+        "name": "Generic NodeMCU 30 pin",
+        "nrf24": {
+            "miso": 19,
+            "mosi": 23,
+            "clk": 18,
+            "irq": 16,
+            "en": 17,
+            "cs": 5
+        },
+        "eth": {
+            "enabled": false,
+            "phy_addr": -1,
+            "power": -1,
+            "mdc": -1,
+            "mdio": -1,
+            "type": -1,
+            "clk_mode": -1
+        }
+    },
+    {
+        "name": "WT32-ETH01",
+        "nrf24": {
+            "miso": 4,
+            "mosi": 2,
+            "clk": 32,
+            "irq": 33,
+            "en": 14,
+            "cs": 15
+        },
+        "eth": {
+            "enabled": true,
+            "phy_addr": 1,
+            "power": 16,
+            "mdc": 23,
+            "mdio": 18,
+            "type": 0,
+            "clk_mode": 3
+        }
+    },
+    {
+        "name": "LILYGO TTGO T-Internet-POE",
+        "nrf24": {
+            "miso": 2,
+            "mosi": 15,
+            "clk": 14,
+            "irq": 34,
+            "en": 12,
+            "cs": 4
+        },
+        "eth": {
+            "enabled": true,
+            "phy_addr": 0,
+            "power": -1,
+            "mdc": 23,
+            "mdio": 18,
+            "type": 0,
+            "clk_mode": 3
+        }
+    }
+]
-Original file line number
+Diff line change
@@ Expand Up @@
     ]
     ```
-    The json file can contain multiple profiles. Each profile requires a name and different parameters. If one parameter is not set, the default value, as compiled into the firmware is used. The example above shows all the currently supported values. Others may follow.
+    The json file can contain multiple profiles. Each profile requires a name and different parameters. If one parameter is not set, the default value, as compiled into the firmware is used. The example above shows all the currently supported values. Others may follow. A sample file with a lot of boards can be found [here](pin_mapping.json). This means you can just flash the generic bin file and upload the pin_mapping.json file. Then you select your board and everything works hopyfully as expected.