x86/lguest: Remove lguest support

Lguest seems to be rather unused these days. It has seen only patches
ensuring it still builds the last two years and its official state is
"Odd Fixes".

Remove it in order to be able to clean up the paravirt code.

Signed-off-by: Juergen Gross <[email protected]>
Acked-by: Rusty Russell <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

MAINTAINERS

@@ -7640,17 +7640,6 @@ T:	git git://linuxtv.org/mkrufky/tuners.git
 S:	Maintained
 F:	drivers/media/dvb-frontends/lgdt3305.*
 
-LGUEST
-M:	Rusty Russell <[email protected]>
-L:	[email protected]
-W:	http://lguest.ozlabs.org/
-S:	Odd Fixes
-F:	arch/x86/include/asm/lguest*.h
-F:	arch/x86/lguest/
-F:	drivers/lguest/
-F:	include/linux/lguest*.h
-F:	tools/lguest/
-
 LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
 M:	Viresh Kumar <[email protected]>
 L:	[email protected]

arch/x86/Kbuild

@@ -10,9 +10,6 @@ obj-$(CONFIG_XEN) += xen/
 # Hyper-V paravirtualization support
 obj-$(CONFIG_HYPERVISOR_GUEST) += hyperv/
 
-# lguest paravirtualization support
-obj-$(CONFIG_LGUEST_GUEST) += lguest/
-
 obj-y += realmode/
 obj-y += kernel/
 obj-y += mm/

arch/x86/Kconfig

@@ -777,8 +777,6 @@ config KVM_DEBUG_FS
 	  Statistics are displayed in debugfs filesystem. Enabling this option
 	  may incur significant overhead.
 
-source "arch/x86/lguest/Kconfig"
-
 config PARAVIRT_TIME_ACCOUNTING
 	bool "Paravirtual steal time accounting"
 	depends on PARAVIRT

arch/x86/include/asm/processor.h

@@ -662,7 +662,7 @@ static inline void sync_core(void)
 	 * In case NMI unmasking or performance ever becomes a problem,
 	 * the next best option appears to be MOV-to-CR2 and an
 	 * unconditional jump.  That sequence also works on all CPUs,
-	 * but it will fault at CPL3 (i.e. Xen PV and lguest).
+	 * but it will fault at CPL3 (i.e. Xen PV).
 	 *
 	 * CPUID is the conventional way, but it's nasty: it doesn't
 	 * exist on some 486-like CPUs, and it usually exits to a

arch/x86/include/uapi/asm/bootparam.h

@@ -201,7 +201,7 @@ struct boot_params {
  *
  * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
  *	PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
- * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest
+ * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
  * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
  * 	which start at asm startup_xen() entry point and later jump to the C
  * 	xen_start_kernel() entry point. Both domU and dom0 type of guests are

arch/x86/kernel/asm-offsets_32.c

@@ -4,9 +4,6 @@
 
 #include <asm/ucontext.h>
 
-#include <linux/lguest.h>
-#include "../../../drivers/lguest/lg.h"
-
 #define __SYSCALL_I386(nr, sym, qual) [nr] = 1,
 static char syscalls[] = {
 #include <asm/syscalls_32.h>
@@ -62,23 +59,6 @@ void foo(void)
 	OFFSET(stack_canary_offset, stack_canary, canary);
 #endif
 
-#if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
-	BLANK();
-	OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
-	OFFSET(LGUEST_DATA_irq_pending, lguest_data, irq_pending);
-
-	BLANK();
-	OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc);
-	OFFSET(LGUEST_PAGES_host_idt_desc, lguest_pages, state.host_idt_desc);
-	OFFSET(LGUEST_PAGES_host_cr3, lguest_pages, state.host_cr3);
-	OFFSET(LGUEST_PAGES_host_sp, lguest_pages, state.host_sp);
-	OFFSET(LGUEST_PAGES_guest_gdt_desc, lguest_pages,state.guest_gdt_desc);
-	OFFSET(LGUEST_PAGES_guest_idt_desc, lguest_pages,state.guest_idt_desc);
-	OFFSET(LGUEST_PAGES_guest_gdt, lguest_pages, state.guest_gdt);
-	OFFSET(LGUEST_PAGES_regs_trapnum, lguest_pages, regs.trapnum);
-	OFFSET(LGUEST_PAGES_regs_errcode, lguest_pages, regs.errcode);
-	OFFSET(LGUEST_PAGES_regs, lguest_pages, regs);
-#endif
 	BLANK();
 	DEFINE(__NR_syscall_max, sizeof(syscalls) - 1);
 	DEFINE(NR_syscalls, sizeof(syscalls));

arch/x86/kernel/head_32.S

@@ -155,7 +155,6 @@ ENTRY(startup_32)
 	jmp *%eax
 
 .Lbad_subarch:
-WEAK(lguest_entry)
 WEAK(xen_entry)
 	/* Unknown implementation; there's really
 	   nothing we can do at this point. */
@@ -165,7 +164,6 @@ WEAK(xen_entry)
 
 subarch_entries:
 	.long .Ldefault_entry		/* normal x86/PC */
-	.long lguest_entry		/* lguest hypervisor */
 	.long xen_entry			/* Xen hypervisor */
 	.long .Ldefault_entry		/* Moorestown MID */
 num_subarch_entries = (. - subarch_entries) / 4

arch/x86/kernel/platform-quirks.c

@@ -16,7 +16,6 @@ void __init x86_early_init_platform_quirks(void)
 		x86_platform.legacy.reserve_bios_regions = 1;
 		break;
 	case X86_SUBARCH_XEN:
-	case X86_SUBARCH_LGUEST:
 		x86_platform.legacy.devices.pnpbios = 0;
 		x86_platform.legacy.rtc = 0;
 		break;

arch/x86/kvm/Kconfig

@@ -89,6 +89,5 @@ config KVM_MMU_AUDIT
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
 source drivers/vhost/Kconfig
-source drivers/lguest/Kconfig
 
 endif # VIRTUALIZATION