Skip to content

Commit

Permalink
run without lapic and ioapic, if they are not present
Browse files Browse the repository at this point in the history
if no lapic available, use 8253pit for clock
now xv6 runs both on qemu (uniprocessor) and bochs (uniprocessor and MP)
  • Loading branch information
kaashoek committed Sep 7, 2006
1 parent f9bc445 commit f701721
Show file tree
Hide file tree
Showing 12 changed files with 128 additions and 48 deletions.
46 changes: 46 additions & 0 deletions 8253pit.c
Original file line number Diff line number Diff line change
@@ -0,0 +1,46 @@
#include "types.h"
#include "x86.h"
#include "defs.h"
#include "traps.h"

// Register definitions for the Intel
// 8253/8254/82C54 Programmable Interval Timer (PIT).

#define IO_TIMER1 0x040 /* 8253 Timer #1 */
#define IO_TIMER2 0x048 /* 8253 Timer #2 (EISA only) */

//
// Frequency of all three count-down timers; (TIMER_FREQ/freq) is the
// appropriate count to generate a frequency of freq hz.

#define TIMER_FREQ 1193182
#define TIMER_DIV(x) ((TIMER_FREQ+(x)/2)/(x))

#define TIMER_CNTR0 (IO_TIMER1 + 0) /* timer 0 counter port */
#define TIMER_CNTR1 (IO_TIMER1 + 1) /* timer 1 counter port */
#define TIMER_CNTR2 (IO_TIMER1 + 2) /* timer 2 counter port */
#define TIMER_MODE (IO_TIMER1 + 3) /* timer mode port */
#define TIMER_SEL0 0x00 /* select counter 0 */
#define TIMER_SEL1 0x40 /* select counter 1 */
#define TIMER_SEL2 0x80 /* select counter 2 */
#define TIMER_INTTC 0x00 /* mode 0, intr on terminal cnt */
#define TIMER_ONESHOT 0x02 /* mode 1, one shot */
#define TIMER_RATEGEN 0x04 /* mode 2, rate generator */
#define TIMER_SQWAVE 0x06 /* mode 3, square wave */
#define TIMER_SWSTROBE 0x08 /* mode 4, s/w triggered strobe */
#define TIMER_HWSTROBE 0x0a /* mode 5, h/w triggered strobe */
#define TIMER_LATCH 0x00 /* latch counter for reading */
#define TIMER_LSB 0x10 /* r/w counter LSB */
#define TIMER_MSB 0x20 /* r/w counter MSB */
#define TIMER_16BIT 0x30 /* r/w counter 16 bits, LSB first */
#define TIMER_BCD 0x01 /* count in BCD */

void
pit8253_timerinit(void)
{
// initialize 8253 clock to interrupt 100 times/sec
outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT);
outb(IO_TIMER1, TIMER_DIV(100) % 256);
outb(IO_TIMER1, TIMER_DIV(100) / 256);
irq_setmask_8259A(irq_mask_8259A & ~(1<<IRQ_TIMER));
}
1 change: 1 addition & 0 deletions Makefile
Original file line number Diff line number Diff line change
Expand Up @@ -21,6 +21,7 @@ OBJS = \
vectors.o\
bio.o\
fs.o\
8253pit.o\

# Cross-compiling (e.g., on Mac OS X)
TOOLPREFIX = i386-jos-elf-
Expand Down
1 change: 1 addition & 0 deletions console.c
Original file line number Diff line number Diff line change
Expand Up @@ -409,6 +409,7 @@ console_init()
devsw[CONSOLE].d_write = console_write;
devsw[CONSOLE].d_read = console_read;

irq_setmask_8259A(irq_mask_8259A & ~(1 << IRQ_KBD));
ioapic_enable(IRQ_KBD, 0);

use_console_lock = 1;
Expand Down
6 changes: 6 additions & 0 deletions defs.h
Original file line number Diff line number Diff line change
Expand Up @@ -49,9 +49,15 @@ int checkstring(uint);
int putint(struct proc*, uint, int);

// picirq.c
extern ushort irq_mask_8259A;
void pic_init(void);
void irq_setmask_8259A(ushort);

// 8253pit.c
void pit8253_timerinit(void);

// mp.c
extern int ismp;
void mp_init(void);
void mp_startthem(void);
int mp_bcpu(void);
Expand Down
1 change: 1 addition & 0 deletions ide.c
Original file line number Diff line number Diff line change
Expand Up @@ -50,6 +50,7 @@ void
ide_init(void)
{
initlock(&ide_lock, "ide");
irq_setmask_8259A(irq_mask_8259A & ~(1 << IRQ_IDE));
ioapic_enable (IRQ_IDE, ncpu - 1);
ide_wait_ready(0);
disk_1_present = ide_probe_disk1();
Expand Down
66 changes: 35 additions & 31 deletions ioapic.c
Original file line number Diff line number Diff line change
Expand Up @@ -37,28 +37,30 @@ ioapic_init(void)
uchar id;
int i;

io = (struct ioapic*) IO_APIC_BASE;
l = ioapic_read(io, IOAPIC_VER);
nintr = ((l & IOART_VER_MAXREDIR) >> MAXREDIRSHIFT) + 1;
id = ioapic_read(io, IOAPIC_ID) >> APIC_ID_SHIFT;
if(id != ioapic_id)
panic("ioapic_init: id isn't equal to ioapic_id\n");
for(i = 0; i < nintr; i++) {
// active-hi and edge-triggered for ISA interrupts
// Assume that pin 0 on the first I/O APIC is an ExtINT pin.
// Assume that pins 1-15 are ISA interrupts
l = ioapic_read(io, IOAPIC_REDTBL_LO(i));
l = l & ~IOART_INTMASK; // allow INTs
l |= IOART_INTMSET;
l = l & ~IOART_INTPOL; // active hi
l = l & ~IOART_TRGRMOD; // edgee triggered
l = l & ~IOART_DELMOD; // fixed
l = l & ~IOART_DESTMOD; // physical mode
l = l | (IRQ_OFFSET + i); // vector
ioapic_write(io, IOAPIC_REDTBL_LO(i), l);
h = ioapic_read(io, IOAPIC_REDTBL_HI(i));
h &= ~IOART_DEST;
ioapic_write(io, IOAPIC_REDTBL_HI(i), h);
if (ismp) {
io = (struct ioapic*) IO_APIC_BASE;
l = ioapic_read(io, IOAPIC_VER);
nintr = ((l & IOART_VER_MAXREDIR) >> MAXREDIRSHIFT) + 1;
id = ioapic_read(io, IOAPIC_ID) >> APIC_ID_SHIFT;
if(id != ioapic_id)
cprintf("ioapic_init: id isn't equal to ioapic_id; not a MP\n");
for(i = 0; i < nintr; i++) {
// active-hi and edge-triggered for ISA interrupts
// Assume that pin 0 on the first I/O APIC is an ExtINT pin.
// Assume that pins 1-15 are ISA interrupts
l = ioapic_read(io, IOAPIC_REDTBL_LO(i));
l = l & ~IOART_INTMASK; // allow INTs
l |= IOART_INTMSET;
l = l & ~IOART_INTPOL; // active hi
l = l & ~IOART_TRGRMOD; // edgee triggered
l = l & ~IOART_DELMOD; // fixed
l = l & ~IOART_DESTMOD; // physical mode
l = l | (IRQ_OFFSET + i); // vector
ioapic_write(io, IOAPIC_REDTBL_LO(i), l);
h = ioapic_read(io, IOAPIC_REDTBL_HI(i));
h &= ~IOART_DEST;
ioapic_write(io, IOAPIC_REDTBL_HI(i), h);
}
}
}

Expand All @@ -67,13 +69,15 @@ ioapic_enable (int irq, int cpunum)
{
uint l, h;
struct ioapic *io;

io = (struct ioapic*) IO_APIC_BASE;
l = ioapic_read(io, IOAPIC_REDTBL_LO(irq));
l = l & ~IOART_INTMASK; // allow INTs
ioapic_write(io, IOAPIC_REDTBL_LO(irq), l);
h = ioapic_read(io, IOAPIC_REDTBL_HI(irq));
h &= ~IOART_DEST;
h |= (cpunum << APIC_ID_SHIFT);
ioapic_write(io, IOAPIC_REDTBL_HI(irq), h);

if (ismp) {
io = (struct ioapic*) IO_APIC_BASE;
l = ioapic_read(io, IOAPIC_REDTBL_LO(irq));
l = l & ~IOART_INTMASK; // allow INTs
ioapic_write(io, IOAPIC_REDTBL_LO(irq), l);
h = ioapic_read(io, IOAPIC_REDTBL_HI(irq));
h &= ~IOART_DEST;
h |= (cpunum << APIC_ID_SHIFT);
ioapic_write(io, IOAPIC_REDTBL_HI(irq), h);
}
}
33 changes: 23 additions & 10 deletions lapic.c
Original file line number Diff line number Diff line change
Expand Up @@ -105,24 +105,30 @@ lapic_write(int r, int data)
void
lapic_timerinit(void)
{
lapic_write(LAPIC_TDCR, LAPIC_X1);
lapic_write(LAPIC_TIMER, LAPIC_CLKIN | LAPIC_PERIODIC |
(IRQ_OFFSET + IRQ_TIMER));
lapic_write(LAPIC_TCCR, 10000000);
lapic_write(LAPIC_TICR, 10000000);
if (lapicaddr) {
lapic_write(LAPIC_TDCR, LAPIC_X1);
lapic_write(LAPIC_TIMER, LAPIC_CLKIN | LAPIC_PERIODIC |
(IRQ_OFFSET + IRQ_TIMER));
lapic_write(LAPIC_TCCR, 10000000);
lapic_write(LAPIC_TICR, 10000000);
}
}

void
lapic_timerintr(void)
{
lapic_write(LAPIC_EOI, 0);
if (lapicaddr)
lapic_write(LAPIC_EOI, 0);
}

void
lapic_init(int c)
{
uint r, lvt;

if (lapicaddr == 0)
return;

lapic_write(LAPIC_DFR, 0xFFFFFFFF); // Set dst format register
r = (lapic_read(LAPIC_ID)>>24) & 0xFF; // Read APIC ID
lapic_write(LAPIC_LDR, (1<<r)<<24); // Set logical dst register to r
Expand Down Expand Up @@ -155,25 +161,32 @@ lapic_init(int c)
void
lapic_enableintr(void)
{
lapic_write(LAPIC_TPR, 0);
if (lapicaddr)
lapic_write(LAPIC_TPR, 0);
}

void
lapic_disableintr(void)
{
lapic_write(LAPIC_TPR, 0xFF);
if (lapicaddr)
lapic_write(LAPIC_TPR, 0xFF);
}

void
lapic_eoi(void)
{
lapic_write(LAPIC_EOI, 0);
if (lapicaddr)
lapic_write(LAPIC_EOI, 0);
}

int
cpu(void)
{
int x = (lapic_read(LAPIC_ID)>>24) & 0xFF;
int x;
if (lapicaddr)
x = (lapic_read(LAPIC_ID)>>24) & 0xFF;
else
x = 0;
return x;
}

Expand Down
7 changes: 5 additions & 2 deletions main.c
Original file line number Diff line number Diff line change
Expand Up @@ -71,8 +71,11 @@ main0(void)
// start other CPUs
mp_startthem();

// turn on timer and enable interrupts on the local APIC
lapic_timerinit();
// turn on timer
if (ismp) lapic_timerinit();
else pit8253_timerinit();

// enable interrupts on the local APIC
lapic_enableintr();

// Enable interrupts on this processor.
Expand Down
8 changes: 6 additions & 2 deletions mp.c
Original file line number Diff line number Diff line change
Expand Up @@ -30,6 +30,7 @@ static char *buses[] = {
};

struct cpu cpus[NCPU];
int ismp;
int ncpu;
uchar ioapic_id;

Expand Down Expand Up @@ -124,8 +125,11 @@ mp_init(void)
uchar byte;

ncpu = 0;
if((r = mp_detect()) != 0)
if((r = mp_detect()) != 0) {
return;
}

ismp = 1;

// Run through the table saving information needed for starting
// application processors and initialising any I/O APICs. The table
Expand Down Expand Up @@ -165,7 +169,7 @@ mp_init(void)
p += sizeof(struct mpie);
continue;
default:
cprintf("mpinit: unknown PCMP type 0x%x (e-p 0x%x)\n", *p, e-p);
cprintf("mp_init: unknown PCMP type 0x%x (e-p 0x%x)\n", *p, e-p);
while(p < e){
cprintf("%uX ", *p);
p++;
Expand Down
4 changes: 2 additions & 2 deletions picirq.c
Original file line number Diff line number Diff line change
Expand Up @@ -11,9 +11,9 @@

// Current IRQ mask.
// Initial IRQ mask has interrupt 2 enabled (for slave 8259A).
static ushort irq_mask_8259A = 0xFFFF & ~(1<<IRQ_SLAVE);
ushort irq_mask_8259A = 0xFFFF & ~(1<<IRQ_SLAVE);

static void
void
irq_setmask_8259A(ushort mask)
{
irq_mask_8259A = mask;
Expand Down
1 change: 1 addition & 0 deletions runoff.list
Original file line number Diff line number Diff line change
Expand Up @@ -60,3 +60,4 @@ lapic.c
ioapic.c
picirq.c
console.c
8253pit.c
2 changes: 1 addition & 1 deletion traps.h
Original file line number Diff line number Diff line change
Expand Up @@ -27,8 +27,8 @@

#define IRQ_OFFSET 32 // IRQ 0 corresponds to int IRQ_OFFSET

#define IRQ_TIMER 0
#define IRQ_KBD 1
#define IRQ_IDE 14
#define IRQ_TIMER 18
#define IRQ_ERROR 19
#define IRQ_SPURIOUS 31

0 comments on commit f701721

Please sign in to comment.