Skip to content
/ lwan Public
forked from lpereira/lwan

Experimental, scalable, high performance HTTP server

License

Notifications You must be signed in to change notification settings

pontscho/lwan

 
 

Repository files navigation

Lwan Web Server

Lwan is a high-performance & scalable web server.

The project web site contains more details.

Build status

OS Arch Release Debug Static Analysis Tests
Linux x86_64 release debug static-analysis coverity Report history tests Fuzzing Status
Linux armv7 release-arm debug-arm
FreeBSD x86_64 freebsd-release freebsd-debug
macOS x86_64 osx-release osx-debug
OpenBSD 6.6 x86_64 openbsd-release openbsd-debug openbsd-tests

Installing

You can either build Lwan yourself, use a container image, or grab a package from your favorite distribution.

Building

Before installing Lwan, ensure all dependencies are installed. All of them are common dependencies found in any GNU/Linux distribution; package names will be different, but it shouldn't be difficult to search using whatever package management tool that's used by your distribution.

Required dependencies

Optional dependencies

The build system will look for these libraries and enable/link if available.

  • Lua 5.1 or LuaJIT 2.0
  • Valgrind
  • Brotli
    • Can be disabled by passing -DENABLE_BROTLI=NO
  • ZSTD
    • Can be disabled by passing -DENABLE_ZSTD=NO
  • On Linux builds, if -DENABLE_TLS=ON (default) is passed:
  • Alternative memory allocators can be used by passing -DUSE_ALTERNATIVE_MALLOC to CMake with the following values:
  • To run test suite:
  • To run benchmark:
  • To build TechEmpower benchmark suite:

💡 Note: On non-x86_64 systems, libucontext will be downloaded and built alongside Lwan. This will require a network connection, so keep this in mind when packaging Lwan for non-x86_64 architectures.

Common operating system package names

Minimum to build

  • ArchLinux: pacman -S cmake zlib
  • FreeBSD: pkg install cmake pkgconf
  • Ubuntu 14+: apt-get update && apt-get install git cmake zlib1g-dev pkg-config
  • macOS: brew install cmake

Build with all optional features

  • ArchLinux: pacman -S cmake zlib sqlite luajit libmariadbclient gperftools valgrind mbedtls
  • FreeBSD: pkg install cmake pkgconf sqlite3 lua51
  • Ubuntu 14+: apt-get update && apt-get install git cmake zlib1g-dev pkg-config lua5.1-dev libsqlite3-dev libmysqlclient-dev libmbedtls-dev
  • macOS: brew install cmake mysql-connector-c sqlite [email protected] pkg-config

Build commands

Clone the repository

~$ git clone git://github.com/lpereira/lwan
~$ cd lwan

Create the build directory

~/lwan$ mkdir build
~/lwan$ cd build

Select build type

Selecting a release version (no debugging symbols, messages, enable some optimizations, etc):

~/lwan/build$ cmake .. -DCMAKE_BUILD_TYPE=Release

If you'd like to enable optimizations but still use a debugger, use this instead:

~/lwan/build$ cmake .. -DCMAKE_BUILD_TYPE=RelWithDebInfo

To disable optimizations and build a more debugging-friendly version:

~/lwan/build$ cmake .. -DCMAKE_BUILD_TYPE=Debug

Build Lwan

~/lwan/build$ make

This will generate a few binaries:

  • src/bin/lwan/lwan: The main Lwan executable. May be executed with --help for guidance.
  • src/bin/testrunner/testrunner: Contains code to execute the test suite.
  • src/samples/freegeoip/freegeoip: FreeGeoIP sample implementation. Requires SQLite.
  • src/samples/techempower/techempower: Code for the TechEmpower Web Framework benchmark. Requires SQLite and MySQL libraries.
  • src/samples/clock/clock: Clock sample. Generates a GIF file that always shows the local time.
  • src/bin/tools/mimegen: Builds the extension-MIME type table. Used during build process.
  • src/bin/tools/bin2hex: Generates a C file from a binary file, suitable for use with #include.
  • src/bin/tools/configdump: Dumps a configuration file using the configuration reader API.
  • src/bin/tools/weighttp: Rewrite of the weighttp HTTP benchmarking tool.

Remarks

Passing -DCMAKE_BUILD_TYPE=Release will enable some compiler optimizations (such as LTO) and tune the code for current architecture.

Important: Please use the release build when benchmarking, as the default is the Debug build, which not only logs all requests to the standard output, but does so while holding a lock, severely holding down the server.

The default build (i.e. not passing -DCMAKE_BUILD_TYPE=Release) will build a version suitable for debugging purposes. This version can be used under Valgrind (if its headers are present) and includes debugging messages that are stripped in the release version. Debugging messages are printed for each and every request.

On debug builds, sanitizers can be enabled. To select which one to build Lwan with, specify one of the following options to the CMake invocation line:

  • -DSANITIZER=ubsan selects the Undefined Behavior Sanitizer.
  • -DSANITIZER=address selects the Address Sanitizer.
  • -DSANITIZER=thread selects the Thread Sanitizer.

Alternative memory allocators can be selected as well. Lwan currently supports TCMalloc, mimalloc, and jemalloc out of the box. To use either one of them, pass -DALTERNATIVE_MALLOC=name to the CMake invocation line, using the names provided in the "Optional dependencies" section.

The -DUSE_SYSLOG=ON option can be passed to CMake to also log to the system log in addition to the standard output.

If you're building Lwan for a distribution, it might be wise to use the -DMTUNE_NATIVE=OFF option, otherwise the generated binary may fail to run on some computers.

Tests

~/lwan/build$ make testsuite

This will compile the testrunner program and execute regression test suite in src/scripts/testsuite.py.

Benchmark

~/lwan/build$ make benchmark

This will compile testrunner and execute benchmark script src/scripts/benchmark.py.

Coverage

Lwan can also be built with the Coverage build type by specifying -DCMAKE_BUILD_TYPE=Coverage. This enables the generate-coverage make target, which will run testrunner to prepare a test coverage report with lcov.

Every commit in this repository triggers the generation of this report, and results are publicly available.

Running

Set up the server by editing the provided lwan.conf; the format is explained in details below.

💡 Note: Lwan will try to find a configuration file based in the executable name in the current directory; testrunner.conf will be used for the testrunner binary, lwan.conf for the lwan binary, and so on.

Configuration files are loaded from the current directory. If no changes are made to this file, running Lwan will serve static files located in the ./wwwroot directory. Lwan will listen on port 8080 on all interfaces.

Lwan will detect the number of CPUs, will increase the maximum number of open file descriptors and generally try its best to autodetect reasonable settings for the environment it's running on. Many of these settings can be tweaked in the configuration file, but it's usually a good idea to not mess with them.

🪄 Tip: Optionally, the lwan binary can be used for one-shot static file serving without any configuration file. Run it with --help for help on that.

Configuration File

Format

Lwan uses a familiar key = value configuration file syntax. Comments are supported with the # character (similar to e.g. shell scripts, Python, and Perl). Nested sections can be created with curly brackets. Sections can be empty; in this case, curly brackets are optional.

some_key_name is equivalent to some key name in configuration files (as an implementation detail, code reading configuration options will only be given the version with underscores).

🪄 Tip: Values can contain environment variables. Use the syntax ${VARIABLE_NAME}. Default values can be specified with a colon (e.g. ${VARIABLE_NAME:foo}, which evaluates to ${VARIABLE_NAME} if it's set, or foo otherwise).

sound volume = 11 # This one is 1 louder

playlist metal {
   files = '''
	/multi/line/strings/are/supported.mp3
	/anything/inside/these/are/stored/verbatim.mp3
   '''
}

playlist chiptune {
   files = """
	/if/it/starts/with/single/quotes/it/ends/with/single/quotes.mod
	/but/it/can/use/double/quotes.s3m
   """
}

Some examples can be found in lwan.conf and techempower.conf.

Value types

Type Description
str Any kind of free-form text, usually application specific
int Integer number. Range is application specific
time Time interval. See table below for units
bool Boolean value. See table below for valid values

Time Intervals

Time fields can be specified using multipliers. Multiple can be specified, they're just added together; for instance, "1M 1w" specifies "1 month and 1 week" (37 days). The following table lists all known multipliers:

Multiplier Description
s Seconds
m Minutes
h Hours
d Days
w 7-day Weeks
M 30-day Months
y 365-day Years

💡 Note: A number with a multiplier not in this table is ignored; a warning is issued while reading the configuration file. No spaces must exist between the number and its multiplier.

Boolean Values

True Values False Values
Any integer number different than 0 0
on off
true false
yes no

Global Settings

It's generally a good idea to let Lwan decide the best settings for your environment. However, not every environment is the same, and not all uses can be decided automatically, so some configuration options are provided.

Option Type Default Description
keep_alive_timeout time 15 Timeout to keep a connection alive
quiet bool false Set to true to not print any debugging messages. Only effective in release builds.
expires time 1M 1w Value of the "Expires" header. Default is 1 month and 1 week
threads int 0 Number of I/O threads. Default (0) is the number of online CPUs
proxy_protocol bool false Enables the PROXY protocol. Versions 1 and 2 are supported. Only enable this setting if using Lwan behind a proxy, and the proxy supports this protocol; otherwise, this allows anybody to spoof origin IP addresses
max_post_data_size int 40960 Sets the maximum number of data size for POST requests, in bytes
max_put_data_size int 40960 Sets the maximum number of data size for PUT requests, in bytes
allow_temp_files str "" Use temporary files; set to post for POST requests, put for PUT requests, or all (equivalent to setting to post put) for both.
error_template str Default error template Template for error codes. See variables below.

Variables for error_template

Variable Type Description
short_message str Short error message (e.g. Not found)
long_message str Long error message (e.g. The requested resource could not be found on this server)

Straitjacket

Lwan can drop its privileges to a user in the system, and limit its filesystem view with a chroot. While not bulletproof, this provides a first layer of security in the case there's a bug in Lwan.

In order to use this feature, declare a straitjacket section, and set some options. This requires Lwan to be executed as root.

Although this section can be written anywhere in the file (as long as it is a top level declaration), if any directories are open, due to e.g. instantiating the serve_files module, Lwan will refuse to start. (This check is only performed on Linux as a safeguard for malconfiguration.)

🪄 Tip: Declare a Straitjacket right before a site section in such a way that configuration files and private data (e.g. TLS keys) are out of reach of the server after initialization has taken place.

Option Type Default Description
user str NULL Drop privileges to this user name
chroot str NULL Path to chroot()
drop_capabilities bool true Drop all capabilities with capset(2) (under Linux), or pledge(2) (under OpenBSD).

Headers

If there's a need to specify custom headers for each response, one can declare a headers section in the global scope. The order which this section appears isn't important.

For example, this declaration:

headers {
	Server = Apache/1.0.0 or nginx/1.0.0 (at your option)
	Some-Custom-Header = ${WITH_THIS_ENVIRONMENT_VARIABLE}
}

Will both override the Server header (Server: lwan won't be sent), and set Some-Custom-Header with the value obtained from the environment variable $WITH_THIS_ENVIRONMENT_VARIABLE.

Some headers can't be overridden, as that would cause issues when sending their actual values while servicing requests. These include but is not limited to:

  • Date
  • Expires
  • WWW-Authenticate
  • Connection
  • Content-Type
  • Transfer-Encoding
  • All Access-Control-Allow- headers

💡 Note: Header names are also case-insensitive (and case-preserving). Overriding SeRVeR will override the Server header, but send it the way it was written in the configuration file.

Listeners

Only two listeners are supported per Lwan process: the HTTP listener (listener section), and the HTTPS listener (tls_listener section). Only one listener of each type is allowed.

⚠️ Warning: TLS support is experimental. Although it is stable during initial testing, your mileage may vary. Only TLSv1.2 is supported at this point, but TLSv1.3 is planned.

💡 Note: TLS support requires 🐧 Linux with the tls.ko module built-in or loaded. Support for other operating systems may be added in the future. FreeBSD seems possible, other operating systems do not seem to offer similar feature. For unsupported operating systems, using a TLS terminator proxy such as Hitch is a good option.

For both listener and tls_listener sections, the only parameter is the the interface address and port to listen on. The listener syntax is ${ADDRESS}:${PORT}, where ${ADDRESS} can either be * (binding to all interfaces), an IPv6 address (if surrounded by square brackets), an IPv4 address, or a hostname. For instance, listener localhost:9876 would listen only in the lo interface, port 9876.

While a listener section takes no keys, a tls_listener section requires two: cert and key (each pointing, respectively, to the location on disk where the TLS certificate and private key files are located) and takes an optional boolean hsts key, which controls if Strict-Transport-Security headers will be sent on HTTPS responses.

🪄 Tip: To generate these keys for testing purposes, the OpenSSL command-line tool can be used like the following: openssl req -nodes -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem -sha256 -days 7

💡 Note: It's recommended that a Straitjacket with a chroot option is declared right after a tls_listener section, in such a way that the paths to the certificate and key are out of reach from that point on.

If systemd socket activation is used, systemd can be specified as a parameter. (If multiple listeners from systemd are specified, systemd:FileDescriptorName can be specified, where FileDescriptorName follows the conventions set in the systemd.socket documentation.)

Examples:

listener *:8080		# Listen on all interfaces, port 8080, HTTP

tls_listener *:8081 {	# Listen on all interfaces, port 8081, HTTPS
	cert = /path/to/cert.pem
	key = /path/to/key.pem
}

# Use named systemd socket activation for HTTP listener
listener systemd:my-service-http.socket

# Use named systemd socket activation for HTTPS listener
tls_listener systemd:my-service-https.socket {
	...
}

Site

A site section groups instances of modules and handlers that will respond to requests to a given URL prefix.

Routing URLs Using Modules or Handlers

In order to route URLs, Lwan matches the largest common prefix from the request URI with a set of prefixes specified in the listener section. How a request to a particular prefix will be handled depends on which handler or module has been declared in the listener section. Handlers and modules are similar internally; handlers are merely functions and hold no state, and modules holds state (named instance). Multiple instances of a module can appear in a listener section.

There is no special syntax to attach a prefix to a handler or module; all the configuration parser rules apply here. Use ${NAME} ${PREFIX} to link the ${PREFIX} prefix path to either a handler named ${NAME} (if ${NAME} begins with &, as with C's "address of" operator), or a module named ${NAME}. Empty sections can be used here.

Each module will have its specific set of options, and they're listed in the next sections. In addition to configuration options, a special authorization section can be present in the declaration of a module instance. Handlers do not take any configuration options, but may include the authorization section.

🪄 Tip: Executing Lwan with the --help command-line argument will show a list of built-in modules and handlers.

The following is some basic documentation for the modules shipped with Lwan.

File Serving

The serve_files module will serve static files, and automatically create directory indices or serve pre-compressed files. It'll generally try its best to serve files in the fastest way possible according to some heuristics.

Option Type Default Description
path str NULL Path to a directory containing files to be served
index_path str index.html File name to serve as an index for a directory
serve_precompressed_path bool true If $FILE.gz exists, is smaller and newer than $FILE, and the client accepts gzip encoding, transfer it
auto_index bool true Generate a directory list automatically if no index_path file present. Otherwise, yields 404
auto_index_readme bool true Includes the contents of README files as part of the automatically generated directory index
directory_list_template str NULL Path to a Mustache template for the directory list; by default, use an internal template
read_ahead int 131702 Maximum amount of bytes to read ahead when caching open files. A value of 0 disables readahead. Readahead is performed by a low priority thread to not block the I/O threads while file extents are being read from the filesystem.
cache_for time 5s Time to keep file metadata (size, compressed contents, open file descriptor, etc.) in cache

💡 Note: Files smaller than 16KiB will be compressed in RAM for the duration specified in the cache_for setting. Lwan will always try to compress with deflate, and will optionally compress with Brotli and ZSTD. If the compression isn't worth it (e.g. adding the Content-Encoding headers would make the resulting response larger than the uncompressed file contents), Lwan won't small send compressed files. For these files, Lwan tries sending the gzipped version if that's found in the filesystem and the client requested this encoding.

For files larger than 16KiB, Lwan will not attempt to compress them. In future versions, it might do this and send responses using chunked-encoding while the file is being compressed (up to a certain limit, of course), but for now, only precompressed files (see serve_precompressed_path setting in the table above) are considered.

Variables for directory_list_template
Variable Type Description
rel_path str Path relative to the root directory real path
readme str Contents of first readme file found (readme, readme.txt, read.me, README.TXT, README)
file_list iterator Iterates on file list
file_list.zebra_class str odd for odd items, or even or even items
file_list.icon str Path to the icon for the file type
file_list.name str File name (escaped)
file_list.type str File type (directory or regular file)
file_list.size int File size
file_list.unit str Unit for file_size

Lua

The lua module will allow requests to be serviced by scripts written in the Lua programming language. Although the functionality provided by this module is quite spartan, it's able to run frameworks such as Sailor.

Scripts can be served from files or embedded in the configuration file, and the results of loading them, the standard Lua modules, and (optionally, if using LuaJIT) optimizing the code will be cached for a while.

💡 Note: Lua scripts can't use global variables, as they may be not only serviced by different threads, but the state will be available only for the amount of time specified in the cache_period configuration option. This is because each I/O thread in Lwan will create an instance of a Lua VM (i.e. one lua_State struct for every I/O thread), and each Lwan coroutine will spawn a Lua thread (with lua_newthread()) per request.

There's no need to have one instance of the Lua module for each endpoint; a single script, embedded in the configuration file or otherwise, can service many different endpoints. Scripts are supposed to implement functions with the following signature: handle_${METHOD}_${ENDPOINT}(req), where ${METHOD} can be a HTTP method (i.e. get, post, head, etc.), and ${ENDPOINT} is the desired endpoint to be handled by that function.

🪄 Tip: Use the root endpoint for a catchall. For example, the handler function handle_get_root() will be called if no other handler could be found for that request. If no catchall is specified, the server will return a 404 Not Found error.

The req parameter points to a metatable that contains methods to obtain information from the request, or to set the response, as seen below:

  • req:query_param(param) returns the query parameter (from the query string) with the key param, or nil if not found
  • req:post_param(param) returns the post parameter (only for ${POST} handlers) with the key param, or nil if not found
  • req:set_response(str) sets the response to the string str
  • req:say(str) sends a response chunk (using chunked encoding in HTTP)
  • req:send_event(event, str) sends an event (using server-sent events)
  • req:cookie(param) returns the cookie named param, or nil is not found
  • req:set_headers(tbl) sets the response headers from the table tbl; a header may be specified multiple times by using a table, rather than a string, in the table value ({'foo'={'bar', 'baz'}}); must be called before sending any response with say() or send_event()
  • req:header(name) obtains the header from the request with the given name or nil if not found
  • req:sleep(ms) pauses the current handler for the specified amount of milliseconds
  • req:ws_upgrade() returns 1 if the connection could be upgraded to a WebSocket; 0 otherwise
  • req:ws_write_text(str) sends str through the WebSocket-upgraded connection as text frame
  • req:ws_write_binary(str) sends str through the WebSocket-upgraded connection as binary frame
  • req:ws_write(str) sends str through the WebSocket-upgraded connection as text or binary frame, depending on content containing only ASCII characters or not
  • req:ws_read() returns a string with the contents of the last WebSocket frame, or a number indicating an status (ENOTCONN/107 on Linux if it has been disconnected; EAGAIN/11 on Linux if nothing was available; ENOMSG/42 on Linux otherwise). The return value here might change in the future for something more Lua-like.
  • req:remote_address() returns a string with the remote IP address.
  • req:path() returns a string with the request path.
  • req:query_string() returns a string with the query string (empty string if no query string present).
  • req:body() returns the request body (POST/PUT requests).
  • req:request_id() returns a string containing the request ID.
  • req:request_date() returns the date as it'll be written in the Date response header.
  • req:is_https() returns true if this request is serviced through HTTPS, false otherwise.
  • req:host() returns the value of the Host header if present, otherwise nil.

Handler functions may return either nil (in which case, a 200 OK response is generated), or a number matching an HTTP status code. Attempting to return an invalid HTTP status code or anything other than a number or nil will result in a 500 Internal Server Error response being thrown.

Option Type Default Description
default_type str text/plain Default MIME-Type for responses
script_file str NULL Path to Lua script
cache_period time 15s Time to keep Lua state loaded in memory
script str NULL Inline lua script

Rewrite

The rewrite module will match patterns in URLs and give the option to either redirect to another URL, or rewrite the request in a way that Lwan will handle the request as if it were made in that way originally.

ℹ️ Info: Forked from Lua 5.3.1, the regular expresion engine may not be as feature-packed as most general-purpose engines, but has been chosen specifically because it is a deterministic finite automaton in an attempt to make some kinds of denial of service attacks impossible.

The new URL can be specified using a simple text substitution syntax, or use Lua scripts.

🪄 Tip: Lua scripts will contain the same metamethods available in the req metatable provided by the Lua module, so it can be quite powerful.

Each instance of the rewrite module will require a pattern and the action to execute when such pattern is matched. Patterns are evaluated in the order they appear in the configuration file, and are specified using nested sections in the configuration file. For instance, consider the following example, where two patterns are specified:

rewrite /some/base/endpoint {
    pattern posts/(%d+) {
        # Matches /some/base/endpointposts/2600 and /some/base/endpoint/posts/2600
        rewrite_as = /cms/view-post?id=%1
    }
    pattern imgur/(%a+)/(%g+) {
        # Matches /some/base/endpointimgur/gif/mpT94Ld and /some/base/endpoint/imgur/gif/mpT94Ld
        redirect_to = https://i.imgur.com/%2.%1
    }
}

This example defines two patterns, one providing a nicer URL that's hidden from the user, and another providing a different way to obtain a direct link to an image hosted on a popular image hosting service (i.e. requesting /some/base/endpoint/imgur/mp4/4kOZNYX will redirect directly to a resource in the Imgur service).

The value of rewrite_as or redirect_to can be Lua scripts as well; in which case, the option expand_with_lua must be set to true, and, instead of using the simple text substitution syntax as the example above, a function named handle_rewrite(req, captures) has to be defined instead. The req parameter is documented in the Lua module section; the captures parameter is a table containing all the captures, in order. This function returns the new URL to redirect to.

This module has no options by itself. Options are specified in each and every pattern.

Option Type Default Description
rewrite_as str NULL Rewrite the URL following this pattern
redirect_to str NULL Redirect to a new URL following this pattern
expand_with_lua bool false Use Lua scripts to redirect to or rewrite a request

redirect_to and rewrite_as options are mutually exclusive, and one of them must be specified at least.

It's also possible to specify conditions to trigger a rewrite. To specify one, open a condition block, specify the condition type, and then the parameters for that condition to be evaluated:

Condition Can use subst. syntax Section required Parameters Description
cookie Yes Yes A single key = value Checks if request has cookie key has value value
query Yes Yes A single key = value Checks if request has query variable key has value value
post Yes Yes A single key = value Checks if request has post data key has value value
header Yes Yes A single key = value Checks if request header key has value value
environment Yes Yes A single key = value Checks if environment variable key has value value
stat Yes Yes path, is_dir, is_file Checks if path exists in the filesystem, and optionally checks if is_dir or is_file
encoding No Yes deflate, gzip, brotli, zstd, none Checks if client accepts responses in a determined encoding (e.g. deflate = yes for Deflate encoding)
proxied No No Boolean Checks if request has been proxied through PROXY protocol
http_1.0 No No Boolean Checks if request is made with a HTTP/1.0 client
is_https No No Boolean Checks if request is made through HTTPS
has_query_string No No Boolean Checks if request has a query string (even if empty)
method No No Method name Checks if HTTP method is the one specified
lua No No String Runs Lua function matches(req) inside String and checks if it returns true or false
backref No Yes A single backref index = value Checks if the backref number matches the provided value

Can use subst. syntax refers to the ability to reference the matched pattern using the same substitution syntax used for the rewrite as or redirect to actions. For instance, condition cookie { some-cookie-name = foo-%1-bar } will substitute %1 with the first match from the pattern this condition is related to.

💡 Note: Conditions that do not require a section have to be written as a key; for instance, condition has_query_string = yes.

For example, if one wants to send site-dark-mode.css if there is a style cookie with the value dark, and send site-light-mode.css otherwise, one can write:

pattern site.css {
   rewrite as = /site-dark-mode.css
   condition cookie { style = dark }
}
pattern site.css {
   rewrite as = /site-light-mode.css
}

Another example: if one wants to send pre-compressed files if they do exist in the filesystem and the user requested them:

pattern (%g+) {
   condition encoding { brotli = yes }
   condition stat { path = %1.brotli }
   rewrite as = %1.brotli
}
pattern (%g+) {
   condition encoding { gzip = yes }
   condition stat { path = %1.gzip }
   rewrite as = %1.gzip
}
pattern (%g+) {
   condition encoding { zstd = yes }
   condition stat { path = %1.zstd }
   rewrite as = %1.zstd
}
pattern (%g+) {
   condition encoding { deflate = yes }
   condition stat { path = %1.deflate }
   rewrite as = %1.deflate
}

💡 Note: In general, this is not necessary, as the file serving module will do this automatically and pick the smallest file available for the requested encoding, but this shows it's possible to have a similar feature by configuration alone.

Redirect

The redirect module will, as it says in the tin, generate a 301 Moved permanently (by default; the code can be changed, see below) response, according to the options specified in its configuration. Generally, the rewrite module should be used instead as it packs more features; however, this module serves also as an example of how to write Lwan modules (less than 100 lines of code).

If the to option is not specified, it always generates a 500 Internal Server Error response. Specifying an invalid HTTP code, or a code that Lwan doesn't know about (see enum lwan_http_status), will produce a 301 Moved Permanently response.

Option Type Default Description
to str NULL The location to redirect to
code int 301 The HTTP code to perform a redirect

Response

The response module will generate an artificial response of any HTTP code. In addition to also serving as an example of how to write a Lwan module, it can be used to carve out voids from other modules (e.g. generating a 405 Not Allowed response for files in /.git, if / is served with the serve_files module).

If the supplied code falls outside the response codes known by Lwan, a 404 Not Found error will be sent instead.

Option Type Default Description
code int 999 A HTTP response code

FastCGI

The fastcgi module proxies requests between the HTTP client connecting to Lwan and a FastCGI server accessible by Lwan. This is useful, for instance, to serve pages from a scripting language such as PHP.

💡 Note: This is a preliminary version of this module, and as such, it's not well optimized and some features are missing.

Option Type Default Description
address str Address to connect to. Can be a file path (for Unix Domain Sockets), IPv4 address (aaa.bbb.ccc.ddd:port), or IPv6 address ([...]:port).
script_path str Location where the CGI scripts are located.
default_index str index.php Default script to execute if unspecified in the request URI.

Authorization Section

Authorization sections can be declared in any module instance or handler, and provides a way to authorize the fulfillment of that request through the standard HTTP authorization mechanism. In order to require authorization to access a certain module instance or handler, declare an authorization section with a basic parameter, and set one of its options.

Option Type Default Description
realm str Lwan Realm for authorization. This is usually shown in the user/password UI in browsers
password_file str NULL Path for a file containing username and passwords (in clear text). The file format is the same as the configuration file format used by Lwan

⚠️ Warning: Not only passwords are stored in clear text in a file that should be accessible by the server, they'll be kept in memory for a few seconds. Avoid using this feature if possible.

Hacking

Please read this section (and follow it) if you're planning on contributing to Lwan. There's nothing unexpected here; this mostly follows the rules and expectations of many other FOSS projects, but every one expects things a little bit different from one another.

Coding Style

Lwan tries to follow a consistent coding style throughout the project. If you're considering contributing a patch to the project, please respect this style by trying to match the style of the surrounding code. In general:

  • global_variables_are_named_like_this, even though they tend to be rare and should be marked as static (with rare exceptions)
  • Local variables are usually shorter, e.g. local_var, i, conn
  • Struct names are often as short as they're descriptive. typedef for structs are rarely used in Lwan
  • Header files should use #pragma once instead of the usual include guard hackery
  • Functions that are used between .c files but are not APIs to be exposed to liblwan should have their prototype added to lwan-private.h
  • Functions should be short and sweet. Exceptions may apply
  • Public functions should be prefixed with lwan_
  • Public types should be prefixed with lwan_
  • Private functions must be static, and can be named without the lwan_ prefix
  • Code is indented with 4 spaces; don't use tabs
  • There's a suggested line break at column 80, but it's not enforced
  • /* Old C-style comments are preferred */
  • clang-format can be used to format the source code in an acceptable way; a .clang-format file is provided

Tests

If modifying well-tested areas of the code (e.g. the event loop, HTTP parser, etc.), please add a new integration test and make sure that, before you send a pull request, all tests (including the new ones you've sent) are working. Tests can be added by modifying src/scripts/testsuite.py, and executed by either invoking that script directly from the source root, or executing the testsuite build target.

Some tests will only work on Linux, and won't be executed on other platforms.

Fuzz-testing

Lwan is automatically fuzz-tested by OSS-Fuzz. To fuzz-test locally, though, one can follow the instructions to test locally.

Currently, there are fuzzing drivers for the request parsing code, the configuration file parser, the template parser, and the Lua string pattern matching library used in the rewrite module.

Adding new fuzzers is trivial:

  • Fuzzers are implemented in C++ and the sources are placed in src/bin/fuzz.
  • Fuzzers should be named ${FUZZER_NAME}_fuzzer.cc. Look at the OSS-Fuzz documentation and other fuzzers on information about how to write these.
  • These files are not compiled by the Lwan build system, but rather by the build scripts used by OSS-Fuzz. To test your fuzzer, please follow the instructions to test locally, which will build the fuzzer in the environment they'll be executed in.
  • A fuzzing corpus has to be provided in src/fuzz/corpus. Files have to be named corpus-${FUZZER_NAME}-${UNIQUE_ID}.

Exporting APIs

The shared object version of liblwan on ELF targets (e.g. Linux) will use a symbol filter script to hide symbols that are considered private to the library. Please edit src/lib/liblwan.sym to add new symbols that should be exported to liblwan.so.

Using Git and Pull Requests

Lwan tries to maintain a source history that's as flat as possible, devoid of merge commits. This means that pull requests should be rebased on top of the current master before they can be merged; sometimes this can be done automatically by the GitHub interface, sometimes they need some manual work to fix conflicts. It is appreciated if the contributor fixes these conflicts when asked.

It is advisable to push your changes to your fork on a branch-per-pull request, rather than pushing to the master branch; the reason is explained below.

Please ensure that Git is configured properly with your name (it doesn't really matter if it is your legal name or a nickname, but it should be enough to credit you) and a valid email address. There's no need to add Signed-off-by lines, even though it's fine to send commits with them.

If a change is requested in a pull request, you have two choices:

  • Reply asking for clarification. Maybe the intentions were not clear enough, and whoever asked for changes didn't fully understand what you were trying to achieve
  • Fix the issue. When fixing issues found in pull requests, please use interactive rebases to squash or fixup commits; don't add your fixes on top of your tree. Do not create another pull request just to accomodate the changes. After rewriting the history locally, force-push to your PR branch; the PR will update automatically with your changes. Rewriting the history of development branches is fine, and force-pushing them is normal and expected

It is not enforced, but it is recommended to create smaller commits. How commits are split in Lwan is pretty much arbitrary, so please take a look at the commit history to get an idea on how the division should be made. Git offers a plethora of commands to achieve this result: the already mentioned interactive rebase, the -p option to git add, and git commit --amend are good examples.

Commit messages should have one line of summary (~72 chars), followed by an empty line, followed by paragraphs of 80-char lines explaining the change. The paragraphs explaining the changes are usually not necessary if the summary is good enough. Try to write good commit messages.

Licensing

Lwan is licensed under the GNU General Public License, version 2, or (at your option), any later version. Therefore:

  • Code must be either LGPLv2.1, GPLv2, a permissive "copyfree" license that is compatible with GPLv2 (e.g. MIT, BSD 3-clause), or public domain code (e.g. CC0)
  • Although the program can be distributed and used as if it were licensed as GPLv3, its code must be compatible with GPLv2 as well; no new code can be licensed under versions of GPL newer than 2
  • Likewise, code licensed under licenses compatible with GPLv3 but incompatible with GPLv2 (e.g. Apache 2) are not suitable for inclusion in Lwan
  • Even if the license does not specify that credit should be given (e.g. CC0-licensed code), please give credit to the original author for that piece of code
  • Contrary to popular belief, it is possible to use a GPL'd piece of code on a server without having to share the code for your application. It is only when the binary of that server is shared that source must be available to whoever has that binary. Merely accessing a Lwan server through HTTP does not qualify as having access to the binary program that's running on the server
  • When in doubt, don't take legal advice from a README file: please consult a lawyer that understands free software licensing

Portability

While Lwan was written originally for Linux, it has been ported to BSD systems as well. The build system will detect the supported features and build support library functions as appropriate.

For instance, epoll has been implemented on top of kqueue, and Linux-only syscalls and GNU extensions have been implemented for the supported systems. This blog post explains the details and how #include_next is used.

Performance

It can achieve good performance, yielding about 320000 requests/second on a Core i7 laptop for requests without disk access, and without pipelining.

When disk I/O is required, for files up to 16KiB, it yields about 290000 requests/second; for larger files, this drops to 185000 requests/second, which isn't too shabby either.

These results, of course, with keep-alive connections, and with weighttp running on the same machine (and thus using resources that could be used for the webserver itself).

Without keep-alive, these numbers drop around 6-fold.

IRC Channel

There is an IRC channel (#lwan) on Libera. A standard IRC client can be used.

Lwan in the wild

Here's a non-definitive list of third-party stuff that uses Lwan and have been seen in the wild. Help build this list!

Some other distribution channels were made available as well:

Lwan has been also used as a benchmark:

Mentions in academic journals:

Mentions in magazines:

Some talks mentioning Lwan:

Not really third-party, but alas:

Container Images

Lwan container images are available at ghcr.io/lpereira/lwan. Container runtimes like Docker or Podman may be used to build and run Lwan in a container.

Pull lwan images from GHCR

Container images are tagged with release version numbers, so a specific version of Lwan can be pulled.

# latest version
docker pull ghcr.io/lpereira/lwan:latest
# pull a specific version
docker pull ghcr.io/lpereira/lwan:v0.3

Build images locally

Clone the repository and use Containerfile (Dockerfile) to build Lwan with all optional dependencies enabled.

podman build -t lwan .

Run your image

The image expects to find static content at /wwwroot, so a volume containing your content can be mounted.

docker run --rm -p 8080:8080 -v ./www:/wwwroot lwan

To bring your own lwan.conf, simply mount it at /lwan.conf.

podman run --rm -p 8080:8080 -v ./lwan.conf:/lwan.conf lwan

Lwan quotes

These are some of the quotes found in the wild about Lwan. They're presented in no particular order. Contributions are appreciated:

"I read lwan's source code. Especially, the part of using coroutine was very impressive and it was more interesting than a good novel. Thank you for that." -- @patagonia

"For the server side, we're using Lwan, which can handle 100k+ reqs/s. It's supposed to be super robust and it's working well for us." -- @fawadkhaliq

"Insane C thing" -- Michael Sproul

"I've never had a chance to thank you for Lwan. It inspired me a lot to develop Zewo" -- @paulofariarl

"Let me say that lwan is a thing of beauty. I got sucked into reading the source code for pure entertainment, it's so good. high five" -- @kwilczynski

"Nice work with Lwan! I haven't looked that carefully yet but so far I like what I saw. You definitely have the right ideas." -- @thinkingfish

"Lwan is a work of art. Every time I read through it, I am almost always awe-struck." -- @neurodrone

"For Round 10, Lwan has taken the crown" -- TechEmpower

"Jeez this is amazing. Just end to end, rock solid engineering. (...) But that sells this work short." kjeetgill

"I am only a spare time C coder myself and was surprised that I can follow the code. Nice!" cntlzw

"Impressive all and all, even more for being written in (grokkable!) C. Nice work." tpaschalis

"LWAN was a complete failure" dermetfan

About

Experimental, scalable, high performance HTTP server

Resources

License

Stars

Watchers

Forks

Packages

 
 
 

Languages

  • C 91.4%
  • Python 4.1%
  • CMake 2.8%
  • Lua 1.0%
  • C++ 0.4%
  • Dockerfile 0.1%
  • Other 0.2%