R1 gantry pieces updated

Was messing with making belt different belt paths helping someone model teeth for a gantry and I noticed I messed up on the bearing stacks for the gantry on R1 I made the pitch line diameter for the belt to follow 10.376mm it should be 10.752 ...Its supposed to be 2*(R+.376) I did (2*R)+.376 .376 is the value from the smooth side of the belt to the pitch line of the belt So this makes it so the belt in CAD that is wrapped around the bearing not exactly where it's supposed to be In the CAD the belt that is wrapped around the bearings has a radius of 4.812 and it SHOULD be the same as the bearing (5) 5-4.812 = .188 and .188 X2 is that 2nd .376 I didn't add to belt path when making the gantry
wuxiaogu · Jan 22, 2024 · f6c3364 · f6c3364
1 parent b3ae341
commit f6c3364
Show file tree

Hide file tree

Showing 6 changed files with 14,371 additions and 0 deletions.
diff --git a/DXFs/180/Micron+_MIC6_Bed.step b/DXFs/180/Micron+_MIC6_Bed.step
diff --git a/R1_Gantry_Beta/STLs/Gantry/Idlers/idler_body_x2.stl b/R1_Gantry_Beta/STLs/Gantry/Idlers/idler_body_x2.stl
diff --git a/R1_Gantry_Beta/STLs/Gantry/X_Axis/XY_Joints/Toothed_Idler/xy_joint_left_lower.stl b/R1_Gantry_Beta/STLs/Gantry/X_Axis/XY_Joints/Toothed_Idler/xy_joint_left_lower.stl
diff --git a/R1_Gantry_Beta/STLs/Gantry/X_Axis/XY_Joints/Toothed_Idler/xy_joint_left_upper.stl b/R1_Gantry_Beta/STLs/Gantry/X_Axis/XY_Joints/Toothed_Idler/xy_joint_left_upper.stl
diff --git a/R1_Gantry_Beta/STLs/Gantry/X_Axis/XY_Joints/Toothed_Idler/xy_joint_right_lower.stl b/R1_Gantry_Beta/STLs/Gantry/X_Axis/XY_Joints/Toothed_Idler/xy_joint_right_lower.stl
diff --git a/R1_Gantry_Beta/STLs/Gantry/X_Axis/XY_Joints/Toothed_Idler/xy_joint_right_upper.stl b/R1_Gantry_Beta/STLs/Gantry/X_Axis/XY_Joints/Toothed_Idler/xy_joint_right_upper.stl